Determining The Correct Replacement Equalizers For A Tandem Axle Trailer With 5,200lb Axles

Updated 02/26/2024 | Published 02/16/2024

Question:

i have tandem 5200 lb axles on my travel trailer...is the cree3000 compatable for them ?

asked by: Mike H

Expert Reply:

Hey Mike,

To determine if the MORryde Rubber Equalizers for Tandem Axle Trailers # MR87ZR would be a compatible fit you'll first want to measure the bolt hole spacing on your current equalizers. The # MR87ZR has a 6-1/2" center to center spacing for the shackle strap bolt holes and a 3-1/4" height from the hanger bolt hole down to the center of the shackle strap holes.

Changing the spacing can alter the way the suspension travels and could potentially cause a bind so we always recommend replacing components with similar sizing. For example, if you went with a shorter equalizer then you'd likely need to replace the shackle straps and leaf springs as well to get the spacing right. Take some measurements on your equalizer and let me know what you find and I'll see if there's a compatible option available.

expert reply by: Kevin C

How To Measure An Equalizer
(click to enlarge)

Mike H.

2/20/2024

i remeasured with better tape and the eyelet width is 6 1/8" and the center eyelet height is 3 7/8"....sorry for the first reply

Kevin C.

2/26/2024

@MikeH The closest option we have to these measurements is the Road Armor Shock Absorbing Equalizer Kit - Tandem Axle # LC696740, which has a 6" spacing for the shackle bolt holes and 3-1/4" spacing for the hanger bolt hole to shackle bolt hole. The extra 1/8" on the horizontal measurement is within tolerance but the vertical measurement being 5/8" off you might end up having to replace the shackle straps and even the leaf springs. Before doing that I'd double check with both Lippert and Dexter to see if they offer an exact replacement to save you a ton of hassle.