Selecting The Correct Cushioned Equalizer and Wet Bolt Kit For a Grand Design 2800BH
Updated 04/24/2024 | Published 04/19/2024
Products Featured in This Question
Question:
I have a Grand Design 2800BH and I want to upgrade my basic equalizer EQ-E1 to the Lippert Equa-Flex. Based on the distance between the 2 bottom holes of 7 3/4, I need to go with LC279688. My concern though is my axles are only rated for 4400lbs each. Im told, and also read on some of the expert comments that LC279688 would be too stiff since its rated for 6K-8K which is a lot more than my axle rating. One expert recommended MORryde MR27ZR but this is also rated up to 8k. Wouldnt that be stiff as well? Please advise on what to use. Im staying away from the Dexter E-Z Flex since I had this before on my old trailer and noticed that the rubber core is too firm. Thank you.
asked by: Patrick
Expert Reply:
The Lippert Equa-Flex # LC145546 is the closest cushioned equalizer from Lippert to fitting your Grand Design 2800BH. This particular kit is rated for 5K-8K axles. The MORryde CRE3000 # MR27ZR is going to be the best option for your camper. While this is rated for axles up to 8K all of the CRE3000 equalizers carry this same weight capacity. Do understand the different constructions for these equalizers mean while they may look similar they actually operate differently and since the Lippert is only rated for the 5K-8K axles this means Lippert would not warranty them if they were damaged or caused damage to another component on your camper.
You will want to select the correct wet bolt shackle kit from the list below depending on the length of your current shackles and if you have the correct track suspension.
MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" # MR46ZR
MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" # MR76ZR
MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" # MR58ZR
MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 3-1/8" # MR98ZR
Continue Researching
- Shop: Furrion Variable Speed Chill Cube RV Air Conditioner w/ Heat Pump - Ducted - 18K Btu - White - R32
- Search Results: trailer suspension parts
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Search Results: rv power inverter
- Search Results: rv air conditioners
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Search Results: cre3000
- Search Results: roadmaster comfort ride
- Shop: Lippert Road Armor Shock-Absorbing Equalizer Kit - Tandem Axle - 3,500-8,000 lbs
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Search Results: morryde uo12~016
- Search Results: rv power converter
- Q&A: Does Ducted Furrion Chill Cube With Heat Pump Include Remote
- Q&A: Are Bushings And Install Hardware Included With MORryde CRE3000 Equalizers?
- Video: Victron MultiPlus-II Inverter Charger Installation Guide
- Q&A: What Equalizer Upgrade Would Be Best for My 2026 Jayco Eagle 28BHU?
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Video: Review of Lippert Trailer Suspension Parts - Equalizer Upgrade Kit - LC53CK
- Q&A: Replacement Suspension Parts for a 2025 Grand Design 2800BH
- Q&A: Does The Ducted Air Distribution Box LC64DX Work With Furrion Chill Cube With Heat Pump?
- Q&A: Cushioned Equalizer Kit that Fits 2022 Grand Design Imagine 2600RB
- Shop: Fifth Wheel Hitch
- Video: Turn Rough Roads Into Smooth Rides – MORryde Shows Off Their Suspension Upgrades
- Video: MORryde Tandem Axle Trailer Rubber Equalizers Installation - 2009 Keystone Montana Mountaineer Fifth
- Shop: Suspension Enhancement
- Video: Installing the Coleman-Mach RV Air Conditioner Soft Start Kit
- Video: Review of MORryde Trailer Leaf Spring Suspension - Equalizers - MR27ZR
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
on Trailer Suspension Parts
Patrick
4/20/2024
Thank you Bud for the advise!