How to Tell If MORryde Rubber Equalizers Will Fit Trailer
Updated 11/12/2021 | Published 11/03/2021
Question:
MorRyde Suspension Equalizers My Travel Trailer is a Twilight 2800 which is made for RVOne by Cruiser Rv. Im not sure on the size I need and would like to upgrade my stock one before going long trips. Is there any information you could share so I will know which one or if any will fit? Im not stuck on Mor Ryde Im just looking and price and reviews together. If another brand is a better choice let me know.
asked by: Jimmy M
Expert Reply:
I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers # MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that this kit is for up to 8K axles with a 33" wheelbase, and then the eyelets measure 6-1/2" apart on center and 3-1/8" down from the hanger (see attached). If this matches what you have then you can use this kit. If this doesn't match what you have just let me know what your specs are and I can help you find a suitable replacement.
(click to enlarge)
Product Page this Question was Asked From
MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 6-1/2 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Search Results: morryde trailer suspension parts
- Search Results: trailer suspension parts
- Video: MORryde Rubber Equalizers for Tandem Axle Trailers: The Breakdown
- Search Results: equalizer upgrade kit trailer suspension parts
- Search Results: morryde xfactor
- Search Results: trailer leaf springs
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Q&A: Upgrading Leaf Springs, Equalizers, and Wet Bolt Kit for 2018 Jayco 265RLS
- Search Results: trailer brakes
- Search Results: leaf spring
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: Dexter E-Z Flex Equalizer Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Q&A: What is the Difference Between the MORryde CRE3000 and AllTrek 4000 Suspension Kits
- Shop: Curt Dual Connection Socket w/ Bracket - 7-Way RV Style and 4-Way Flat - Vehicle End
- Q&A: Recommended Cushioned Equalizer Replacement Options For Factory Equalizer 6" Wide and 4" Tall
- Video: MORryde Rubber Equalizers Installation - 2021 Grand Design Transcend Xplor Travel Trailer
- Video: Detailed Breakdown of the MORryde Rubber Equalizers for Tandem Axle Trailers
- Shop: Trailer Wiring
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Video: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track Feature Review
- Shop: Brake Controller
- Q&A: Does a Trailer with Two 3,500 Pound Axles have a Gross Capacity of 7,000 Pounds
- Shop: Fifth Wheel Hitch
- Video: Dexter E-Z Flex Equalizer Kit Review
- Video: Installation of the Dexter E-Z Flex Suspension Kit - Enclosed Trailer
- Video: Checking Out the Americana Metal, Bolt-In Valve Stem
- Q&A: MoRryde CRE3000 Equalizers on 31 Inch Tandem Axle Spacing
on Trailer Suspension Parts
Jimmy M.
11/10/2021
I've been trying to go direct with Morryde and Lippert but I'm not getting anywhere. I'm not blaming them or you its likely my lack of knowledge. The trailer isn't at my house so I'm going to it for measurements. As stated before 58" from the two ends of the leaf springs. The stock equalizers holes side to side are 5 5/8" apart. The springs are mounted under the axle. My trailer again is a Twilight 2800 which is the same as a Shadow Cruiser 277bhs. If you could contact Cruiser to get this information that would be great, I'm sure you probably have a contact there. I've called and get passed around but no answers come out of it. Going off your "Good, Better, Best or however its worded I prefer Morryde for price and Lippert for quality. If they both will fit I'll have to see a price difference to decide. I just want something that fits even if it's the Dexter though I've watched a few video failures on them. Sorry to be a pain I'm leaning to be a DIY RV owner.