What Rear Vehicle Modifications are Needed to Install Curt Hitch 2024 Chevy Blazer EV

Question

Question:

To install this hitch, do you need to modify the plastic bumper, or just the plastic sheeting under the rear end?

asked by: Alex

0

Expert Reply:

Hey Alex, to install the Curt hitch part # C63ZV you only need to trim the lower plastic cover that you referenced and not the bumper cover at all. Basically you need to put an opening in the plastic cover to allow the hitch opening to pass through.

expert reply by: Jameson C

0

Answer 1

Hey Chris; thanks for the question and it's definitely smart to check. I can tell you with 100% certainty that yes, the following Curt trailer hitch does fit your 2024 Chevy Blazer EV: - Curt Trailer Hitch Receiver #C63ZV I went ahead and…

view full answer...

Answer 2

Hey Robert, so at this time we do not have an install video for the Curt Hitch part #C63ZV on a 2024 Chevy Blazer EV yet but hopefully we do soon. If you check out the attached install instruction link though you can see that this does not require…

view full answer...

Answer 3

Hi Todd; for the T-Connector Vehicle Wiring Harness #C44FR on your 2024 Chevy Blazer EV, you can use use a bracket that attaches to the Curt Trailer Hitch Receiver #C63ZV. Just use bracket #18136 and #C42CR; I have added a link below to a video…

view full answer...

Answer 4

Hey Jim, so the Curt hitch part #C63ZV that you referenced does have a 350 lb tongue weight capacity like you mentioned and what that means is that the weight of your motorcycle and carrier together have to weigh less than 350 lbs. The length of the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

What Rear Vehicle Modifications are Needed to Install Curt Hitch 2024 Chevy Blazer EV

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching