bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class III
  4. 2 Inch Hitch
  5. 6000 lbs GTW
  6. No Cross Tube
THIS ITEM IS NOT A FIT FOR
2012 Tiffin Allegro Motorhome
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: 13333
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$112.04
Retail:$192.95
You Save: $80.91
Trailer Hitch
Not Confirmed to Fit

2012 Tiffin Allegro Motorhome

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13333 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (865)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - 13333

Highlights

  • Custom Fit Design: Tailored specifically for various Dodge Ram models without factory hitch.
  • Superior Weight Capacity: Supports a maximum of 6,000 lbs trailer and 600 lbs tongue weight.
  • Enhanced Rust Resistance: Features a gloss black powder coat finish for long-lasting durability.
  • Hassle-Free Installation: Bolts to vehicle frame with included hardware; no welding needed.
  • Weight Distribution Ready: Increases towing capacity to 10,000 lbs when used with WD systems.
  • Expertly Welded Construction: Ensure robust and reliable use, with precision robotic welds.

Features to know about

Effortless Installations: Bolt-On, Weld-Free Design

Forget about complicated installations and welding hassles! The Curt Trailer Hitch Receiver bolts directly onto your vehicle's frame with a straightforward, weld-free design. This feature not only simplifies installation but ensures a hassle-free experience, allowing you to get on the road faster.

Reliability Meets Strength: High Weight Capacities

When it comes to towing, strength is non-negotiable. This hitch delivers with impressive weight ratings — a maximum gross trailer weight of 6,000 lbs, which extends to 10,000 lbs when used with weight distribution. It's designed for towing a variety of loads confidently, from small trailers to sizable campers, matching your towing needs robustly and safely.

Corrosion? Not Here: Superior Rust Resistance

Worried about corrosion? Worry no more. This hitch features a gloss black powder coat finish over a protective base coat, offering superior rust resistance. It's engineered to withstand tough environmental conditions, ensuring longevity and an impeccable look through the years.

Perfect Compatibility: Custom Fit for Your Vehicle

Designed with precision, the Curt Trailer Hitch Receiver offers a custom fit tailored specifically for several Dodge and Ram models. The customizable fitting ensures seamless integration with your vehicle, providing a clean, factory-like appearance that enhances both functionality and aesthetics.

Hitch Customization: 2-Inch Receiver and Class III Rating

Tailor your towing setup with the versatile 2-inch receiver, ideal for a wide variety of hitch-mounted accessories. Rated as a Class III hitch, it provides a robust solution for your everyday towing tasks, maintaining structural integrity and reliability no matter the journey.

All About Safety: Lifetime Warranty and Technical Support

Your peace of mind is just as important as the journey itself. That’s why this hitch comes with a limited lifetime warranty. Plus, when questions arise or technical guidance is needed, lifetime support from knowledgeable experts is just a phone call away, ensuring your hitch remains as reliable as the day it was installed.

Specs

Receiver Specifications

  • Receiver opening: 2" x 2"

Class Rating

  • Rating: Class III

Weight and Capacity

  • Maximum gross trailer weight: 6,000 lbs
  • Maximum GTW when used with weight distribution: 10,000 lbs
  • Maximum tongue weight: 600 lbs
  • Maximum TW when used with weight distribution: 1,000 lbs

Warranty

  • Limited lifetime warranty

13333 Curt Class 3 Trailer Hitch Receiver

Installation Details 13333 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.9

865 reviews
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

Piece of cake to install.



by:

Quick delivery. Easy to Install.



by:

Easy install and fast shipping.



by:
2008 Dodge Ram Pickup

Great product. Great delivery time. TY



by:

good product



by:
2006 Dodge Ram Pickup

Suprising easy instalation.



by:

It installed just like they said it would.



by:

Looks Great! havent installed yet but looks solid!



by:

This product was better than expected and fit very well.



by:

LOOKS GREAT . GOOD WELDS. EASY MOUNTING SYSTEM. CLEAN LOOK.



by:

Very good product and very easy installation. Approx. 20 minutes.



by:

very easy to install awesome fast shipping would recommend to everyone



by:
2008 Dodge Ram Pickup

Installation was easy and item received was great.



by:
2003 Dodge Ram Pickup

it fit perfect,took about 15 min. to install. thank you



by:

Good product, well built and rugged. Very easy to install.
Very pleased and would recommend it.



by:
2005 Dodge Ram Pickup

Very nice product , fits like a glove .



by:
2011 Dodge Ram Pickup

The hitch went on without any problems .. The finish is excellent . I am happy to find this item.



by:
2012 Dodge Ram Pickup

Exactly what I needed. Installed in less than 30 minutes.



by:

the product was the right item and fit great



by:

The exprience was outstanding. Easy to order and fast delivery. I was sent emails on the purchase and delivery info.



by:
2010 Dodge Ram Pickup

Product shipped really fast, easy to install spent about 15 minutes to install including loweing the tire



by:
2008 Dodge Ram Pickup

Nice looking product. Went on the truck easy and looks great. I would definitely recommend.



by:

Fast shipping well built hitch. The install video on the web site was helpful.



by:

VERY impressed with the quick delivery. Have not installed but the product looks to be very well made.



by:

Oustanding service, I would recommend to anyone needing quick service and quality products. Thank you


25
865
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Replacement Installation Hardware for Curt Trailer Hitch 13333 for a 2014 Ram 1500 Express
    For replacement mounting hardware for Curt trailer hitch # 13333 you will need replacement hardware kit # RHK. On the RHK page you will see a box to enter the hitch number and a box to choose the manufacturer of the hitch. Enter the information, click add to cart, and our team will assemble the correct kit. I have also linked the installation instructions and a video showing installation on a 2013 Ram.
    view full answer...
  • Recommended Hitch and Brake Controller for a 2022 Ram 1500 Classic
    The Curt Trailer Hitch Receiver item # 13333, you were looking at, is exactly what you need to add a hitch to you Ram Warlock's bumper. This is a class III hitch with a 2" receiver and it sounds like you have a 2" ball mount. I have linked the instructions below along with an installation video. This hitch is probably the easiest one I have ever seen to install but if you have any additional questions feel free to through them into a comment box below. Additionally, if you're towing...
    view full answer...
  • Which Trailer Hitches are Manufactured in the USA
    It would depend on which hitch manufacturer you're asking about. Hidden Hitch and Draw-Tite Hitches are manufactured in Mexico by Cequent Performance products. They've been around a long time, they make a quality product and they do an excellent job of standing behind their products. Curt Manufacturing builds all their hitches in the USA. B&W and TorkLift also manufacture American-Made hitches, but their applications are primarily for full-sized trucks. Ball mounts and other hitch mounted...
    view full answer...
  • Hitch that Could Possibly Fit 2002 Dodge Ram 1500
    Hey William, the other similar hitch that could maybe fit is the part # 13333 but that doesn't match the date you listed. The mounting holes of this are separated by 7-3/4 inches. Would that work?
    view full answer...
  • Replacement Hardware Kit for Trailer Hitches
    Hey Cory welcome back! The Curt Trailer Hitch item # 13333 uses 1/2"-13 x 1-1/2", grade 8 carriage bolts and 1/4" x 1-1/2" square-hole spacers. We do not sell the bolts separately. You can try to source it from a local hardware store but the only option I have is the Replacement Hardware Kit item # RHK. This will give you a brand new set of all the installation hardware. You'll want to enter Curt 13333 where it says hitch item number when ordering.
    view full answer...
  • Replacement for Factory Hitch on a 2019 Ram 1500 Classic Warlock
    Hey Daryl, thanks for reaching out! We carry the Curt brand, like the part # 13333, but we aren't Curt the manufacturer. Our etrailer Hitch Part # e98852 is essentially the same thing as the Curt referenced above, just with a matte black finish instead of glossy. The etrailer hitch should work in place of your current hitch, but you'll want to check and see how your current hitch is installed. I forget what exact generation it is, but one of the trucks had an OEM hitch that was integrated...
    view full answer...
  • Hardware Included With Replacement Hardware Kit for Curt Class III 13333 Trailer Hitch Receiver
    The photo on the RHK product page is a typical photo, and doesn't represent the actual replacement hardware you'll receive for the Curt # 13333. There are hundreds upon hundreds of unique hitch fits, and it wouldn't be practical to get photos of each and every hardware kit for them. When you order a RHK for a given hitch, it'll consist of all the hardware that would have been included with the original hitch. If you look at the photo, you can see the exact hardware provided with the replacement...
    view full answer...
    Image 1 for
  • Curt Trailer Hitch Receiver For A 2021 Ram 1500 Classic Warlock Edition
    No, according to Curt's fitment chart the Curt Trailer Hitch Receiver # 13333 would be the correct fit for your 2021 Ram 1500 Classic Warlock instead of the # C13419 that you referenced. I've attached a short video below where Rob will walk you through the installation process.
    view full answer...
  • Torque Rating for the Curt Hitch part # 13333
    The torque rating for the Curt Hitch part # 13333 is listed in the installation instructions I attached to the right. I also attached an install video for you to check out as well.
    view full answer...
  • What is the Mounting Hole Spacing on Curt Trailer Hitch C13333
    I went out to the warehouse to measure the hole spacing on Curt trailer hitch # 13333 for you. The holes are spaced 7-3/4 inches apart on center. This is a custom fit hitch designed for the following vehicles: 2004 - 2014 Dodge Ram Pickup 1500 Series, without factory hitch 2003 - 2003 Dodge Ram Pickup 1500 Series, without factory hitch - built After 11/1/02 2003 - 2013 Dodge Ram Pickup 2500 and 3500 Series, without factory hitch 2010 - 2013 Ram 3500 Pickup, without factory hitch 2010 -...
    view full answer...
    Image 1 for
  • Correct Trailer Hitch for a 2020 Chevy Silverado 1500 With Cross Beam Under Bumper
    The Curt Trailer Hitch Receiver part # C13393 is just what you need to install a trailer hitch on a 2020 Chevrolet Silverado 1500 without factory trailer hitch. The setup you have now is just a cross member which is used to provide support when towing from the bumper. I have attached an install video for you of this very hitch installed on a model with the same setup as yours. As you can see, it's a bolt-on installation. If you need a trailer wiring harness as well, the Curt T-Connector...
    view full answer...
    Image 1 for
  • Hitch Options for 2019 Ram 1500 Classic
    For the 2019 Ram Classic we have the larger frame mounted hitches like the Curt # C15572 which have higher towing capacities and we also have the bumper beam mounted hitches like the # 13333 which install easier and are priced lower.
    view full answer...
  • Replacement Hardware Needed For a Curt Trailer Hitch Receiver 13333
    The Curt Trailer Hitch Receiver # 13333 requires the following hardware. Flat-head socket bolt, 3/4"-10 x 3-1/4", grade 8 Qty. 1 Carriage bolt, 1/2"-13 x 1-1/2", grade 8 Qty. 2 Square-hole spacer, 1/4" x 1-1/2" x 3" Qty 2 Serrated-flange nut, 1/2"-13 Qty 2 All of this is available if you order the Replacement Hardware Kit # RHK and enter the Curt 13333 in the appropriate fields when ordering.
    view full answer...
  • Troubleshooting Installation of TorkLift SuperHitch on 2008 Dodge Ram
    Are you sure you have the welded on factory hitch? If a hitch like the Curt # 13333 was bolted on at some point that would explain the issue. The factory hitch should look like the one in the picture below which is from our installation of the # TLD1102 on a 2008 Ram like yours. The plates where it bolts together shouldn't have a gap when it is tightened down but there will be a gap between the receiver tubes since they come together at the collar around the opening. If you're still sure...
    view full answer...
    Image 1 for
  • Trailer Hitch for 2019 Ram 1500
    If you have the 2019 Ram 1500 the only trailer hitch available that is confirmed to fit is the Curt Class IV & V Ultra Frame Receiver Hitch # C15005. If your truck is equipped with the factory hitch though it will need to be removed for this trailer hitch to install correctly. This is a heavy-duty hitch that features a 15,000 pound towing weight capacity and will provide you with a 2 inch receiver. The Curt Class III Hitch Receiver # 13333 referenced in your question will only fit the...
    view full answer...
  • Difference Between Curt # 13333 And Curt # 13374 For 2014 Dodge Ram 1500 Crew Cab
    I spoke with my contact at Curt about your 2014 Dodge Ram 1500. They said it would depend on how you are planning on using the hitch you choose. If you are planning on towing something that would require a weight distribution system when towing, you will want the part # 13374. Weight distribution is needed if your trailer weight is more than 50 percent of your truck weight, or if the rear of your truck sags when the trailer is hooked up, or you experience trailer sway. I have attached...
    view full answer...
  • What Size Bolts Come with Trailer Hitch # 13333
    The trailer hitch part # 13333 that you referenced is a confirmed fit for your 2009 Dodge Ram 1500 and comes with the needed carriage bolts which are 1/2-13 x 1 1/2.
    view full answer...
  • Trailer Hitch Recommendations for a 2011 Dodge Ram
    On the 2011 Dodge Ram that structural bar isn't a spare tire frame, it is a cross member that links the two frame rails together so it is very strong. This is also where Dodge welds on the factory hitch for trucks that have it. The hitch you choose, no matter where it installs, needs to have the capacity to handle the loaded car hauler. The truck also needs to be rated high enough. The highest capacity hitch for the 1500 series is # C15572 rated for 1500 pounds tongue weight and 15,000...
    view full answer...
  • Trailer hitch for a 2019 Dodge Ram 1500 Classic SLT Crew Cab 4x4
    We sure do, several choices actually. What capacity were you looking for? If you're not planning on towing anything heaver than 6000 lbs (10,000 lbs if using weight distribution), a simple choice like # 13333 would work great for you. If you'd prefer a higher capacity hitch that would allow you to tow up to 15000 lbs (16000 lbs with weight distribution), use # C15572. The capacity of this hitch is actually greater than that of the truck, but if you're wanting a hitch that would be ready...
    view full answer...
    Image 1 for
  • Will Curt Trailer Hitch 13333 Fit a 2018 Ram 1500?
    Yes it will! I can confirm for you that the Curt Trailer Hitch # 13333 WILL fit a 2018 Ram 1500 so long as your truck does not have a factory hitch. I have also added a photo for you showing how this hitch looks when installed on an '18 Ram. It's easy to see how this might be confusing but technically there is no such thing as a 2018 Dodge Ram; in 2010 Ram trucks became its own brand, separate from Dodge.
    view full answer...
    Image 1 for
  • Difference Between Curt Trailer Hitch # 13333 and etrailer.com # e98852
    Have no fear. The Curt Class III Trailer Hitch # 13333 that you ordered is a perfect fit and will work great on your 2017 Ram 1500. It will line right up to existing holes in the truck's frame rails for a simple no-drill installation. There are quite a few hitches available that are designed to fit your truck and the etrailer.com Class III Hitch # e98852 that you also mentioned just happens to fall within this group. This is pretty much identical to the hitch you purchased but with a...
    view full answer...
  • Trouble Reinstalling Bumper Cap After Installing Curt Trailer Hitch 13333 on a Dodge Ram
    It seems like some owners can put the cap back on and others cannot after installing Curt trailer hitch # 13333. It is possible that on your truck, and others affected, the hitch is pulled up tighter to the bumper causing the cap not to fit back on. What you can try is to run the bolt in and out a few times to see if it can seat lower in its spot. You can also try changing the order when tightening the bolts because that can affect the position of the hitch. If you have never removed...
    view full answer...
  • What are Curt Trailer Hitch Torque Specs for a 2011 Ram Pickup
    The torque specs for the Curt Trailer Hitch Receiver # 13333 can be found in the attached installation instructions at the bottom of the page. Sometimes the manufacturer can change the torque settings if they happen to swap out some of the hardware so it is always best to go by the instructions that come with your trailer hitch. I am attaching a sample review video on a 2011 Ram pickup for you to check out.
    view full answer...
  • Class 3 or Class 4 Trailer Hitch Receiver for 2007 Dodge Ram 1500 Without Factory Hitch
    Putting a Class III or Class IV trailer hitch on your 2007 Dodge Ram 1500 really depends on how you are going to use it. The Class III etrailer Trailer Hitch Receiver # e98852 or Curt Trailer Hitch Receiver # 13333 is the best option for light towing. They are very simple to put on with zero drilling required and have a 6,000 lb towing and 600 lb tongue weight capacity, which is more than enough for most Ram 1500 models (please refer to your owner's manual for your specific capacity as...
    view full answer...


< Previous
123. . .5



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Jared G
Test Fit:
Jared G
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee Ryan G
Test Fit:
Ryan G
Employee Bradley B
Test Fit:
Bradley B
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Patrick B
Video Edited:
Patrick B
Employee Andrew L
Video Edited:
Andrew L
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee John S
Video Edited:
John S
Employee Lindsey S
Written by:
Lindsey S
Employee Kathleen M
Video by:
Kathleen M
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Joshua U
Video by:
Joshua U
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Michael B
Updated by:
Michael B
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<