Parts Needed To Install a Trailer Brake Controller On a 2024 Toyota RAV4

Question

Question:

What would I need to install a trailer brake controller on my 2024 Toyota RAV4?

asked by: Alice

0

Expert Reply:

To install a Redarc Tow-Pro Liberty Brake Controller # RED52VR on your 2024 Toyota RAV4 we have our 7-Way Kit # ETBC7. This will connect to the 4-Way # C56434 and provides the wiring needed for both the controller and a charge line.

expert reply by: Bud M

0

Answer 1

To upgrade the 4-way of your 2020 Toyota RAV4 Hybrid to a 7-way would require the 7-way upgrade kit part #ETBC7L which your 4-way would plug into and then the 12 volt wire would run up to the vehicle battery and it would be ready to be used with a…

view full answer...

Answer 2

If you are looking to primarily haul a golf cart, going with a single 3,500 pound axle should more than sufficient. Keep in mind though that the weight capacity of the trailer you are looking at can depend on more than just the axle it is equipped…

view full answer...

Answer 3

In order to install a 7-way trailer connector which can both power the brakes and charge the trailer battery on a 2019 Toyota RAV4 you'll need to start with a 4-way, the Curt Wiring Harness part #C56434 is what I recommend as it's plug-n-play…

view full answer...

Answer 4

I have a great roof rack for your 2022 Toyota RAV4 but Thule does not make a roof rack that is compatible with your Toyota's naked roof. Instead you will want the 2022 Toyota RAV4 Roof Rack by Rhino Rack which includes the following parts:…

view full answer...

Answer 5

Yes, for your 2022 Toyota Rav4 LE you are correct you are going to need the: -Rhino-Rack Vortex Aero Crossbars #RRVA126B-2, with the Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars #RRRLKVA, and the Custom DK Fit Kit for 4 Rhino-Rack 2500…

view full answer...

Answer 6

We can get you set up with a 7-way on your 2020 Toyota RAV4, and while there isn't a plug-in option, there are a couple of specific parts you will need for your vehicle, starting with the 4-way, the Curt Wiring Harness with 4-Pole Flat Trailer…

view full answer...

Answer 7

Hey Frank, The Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter #TK57VR would work as long as you have a factory connector in the rear cargo area to plug into for your light functions. This connector is typically hidden…

view full answer...

Answer 8

We definitely have a compatible roof rack for you! Judging by your photos, you do have a bare roof on your 2022 Toyota RAV4 LE. For a great compatible roof rack for your vehicle, I recommend the following parts: - Rhino-Rack Vortex Aero Crossbars…

view full answer...

Answer 9

Hello Dan, We can most definitely get you set up to use your Redarc Tow-Pro Liberty brake controller in your 2022 Toyota Highlander. Since you were looking at the #ETBC7, I’m assuming your Highlander does not have the factory tow package. To equip…

view full answer...

Answer 10

As you already have the Curt Trailer Connector Adapter #C57672 to connect to the 4-way on your 2022 Toyota RAV4, the Curt Echo Wireless Trailer Brake Controller #C51180 only requires an additional charge line to be ran. For this you will need some 10…

view full answer...

Answer 11

Personally Jay, I have never been a fan of the Curt Echo in any of its forms #C79DR, #C51180 or #C27JR. They seem to have a lot of connection issues which causes them to not perform well. As you already have a 4-way I recommend using our 7-Way Kit…

view full answer...

Answer 12

The Redarc Encapsulated Power Diode #RED34FR is only needed on vehicles with certain advanced safety systems like the Adaptive Cruise Control, Assisted Emergency Braking and Autonomous Emergency Braking. If your 2016 Toyota Highlander has these…

view full answer...

Parts Needed To Install a Trailer Brake Controller On a 2024 Toyota RAV4

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching