Recommended Roof Rack for a 2023 Toyota RAV-4 w/ a Naked Roof

Question

Question:

Hello, I have a 2023 RAV4 LE AWD with a naked roof. No roof rails whatsoever, but I want to put a roof rack on it. Do you have a kit for that purpose, and if so how much is it? Thank you very much.

asked by: Thomas D

1

Helpful Expert Reply:

Yes, we do have a roof rack kit that will attach to your 2023 Toyota RAV4's naked roof. This system clamps inside your door jams. You will want the roof rack by Rhino Rack and it includes the following parts:

Rhino-Rack Vortex Aero Crossbars Black # RRVA126B-2

Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs - Qty 4 item # RRRLKVA

Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof item # RR27QP

This aero bar roof rack system has a 165 lbs capacity and the rubberized vortex strips in the top channels dramatically reduce drag and wind noise.

I have linked a picture below that will show this roof rack installed on an older model RAV4 with a naked roof so you can get idea what this will look like once installed.

expert reply by: Jerred H

1

Toyota RAV4 Roof Rack Naked Roof
(click to enlarge)

Answer 1

We definitely have a compatible roof rack for you! Judging by your photos, you do have a bare roof on your 2022 Toyota RAV4 LE. For a great compatible roof rack for your vehicle, I recommend the following parts: - Rhino-Rack Vortex Aero Crossbars…

view full answer...

Answer 2

I have a great roof rack for your 2022 Toyota RAV4 but Thule does not make a roof rack that is compatible with your Toyota's naked roof. Instead you will want the 2022 Toyota RAV4 Roof Rack by Rhino Rack which includes the following parts:…

view full answer...

Answer 3

Yes, for your 2022 Toyota Rav4 LE you are correct you are going to need the: -Rhino-Rack Vortex Aero Crossbars #RRVA126B-2, with the Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars #RRRLKVA, and the Custom DK Fit Kit for 4 Rhino-Rack 2500…

view full answer...

Answer 4

In order to install a 7-way trailer connector which can both power the brakes and charge the trailer battery on a 2019 Toyota RAV4 you'll need to start with a 4-way, the Curt Wiring Harness part #C56434 is what I recommend as it's plug-n-play…

view full answer...

Answer 5

Hello Dan, We can most definitely get you set up to use your Redarc Tow-Pro Liberty brake controller in your 2022 Toyota Highlander. Since you were looking at the #ETBC7, I’m assuming your Highlander does not have the factory tow package. To equip…

view full answer...

Answer 6

If you are looking to primarily haul a golf cart, going with a single 3,500 pound axle should more than sufficient. Keep in mind though that the weight capacity of the trailer you are looking at can depend on more than just the axle it is equipped…

view full answer...

Answer 7

To install a Redarc Tow-Pro Liberty Brake Controller #RED52VR on your 2024 Toyota RAV4 we have our 7-Way Kit #ETBC7. This will connect to the 4-Way #C56434 and provides the wiring needed for both the controller and a charge line.

view full answer...

Answer 8

We can get you set up with a 7-way on your 2020 Toyota RAV4, and while there isn't a plug-in option, there are a couple of specific parts you will need for your vehicle, starting with the 4-way, the Curt Wiring Harness with 4-Pole Flat Trailer…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

As you already have the Curt Trailer Connector Adapter #C57672 to connect to the 4-way on your 2022 Toyota RAV4, the Curt Echo Wireless Trailer Brake Controller #C51180 only requires an additional charge line to be ran. For this you will need some 10…

view full answer...

Answer 11

Since your 2021 Toyota Rav4 Prime has a factory 4-way all you need to convert it to a 7-way and install the Curt Echo Mobile brake controller part #C51180 is the part #ETBC7L which comes everything needed. This would be same solution you'd need…

view full answer...

Answer 12

Personally Jay, I have never been a fan of the Curt Echo in any of its forms #C79DR, #C51180 or #C27JR. They seem to have a lot of connection issues which causes them to not perform well. As you already have a 4-way I recommend using our 7-Way Kit…

view full answer...

Recommended Roof Rack for a 2023 Toyota RAV-4 w/ a Naked Roof

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching