Is The Redarc Encapsulated Power Diode # RED34FR Needed On a 2016 Toyota Highlander W/ Redarc Elite?

Question

Question:

Having a problem how to hook up the red arc encapsulated protection device kit Does my highlander need this if so where do I wire it into

asked by: Terry

0

Expert Reply:

The Redarc Encapsulated Power Diode # RED34FR is only needed on vehicles with certain advanced safety systems like the Adaptive Cruise Control, Assisted Emergency Braking and Autonomous Emergency Braking. If your 2016 Toyota Highlander has these features the Diode will need to be installed into the harness for the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR. I have included an image with the wiring that will need to be connected.

expert reply by: Bud M

0

Redarc Encapsulated Power Diode # RED34FR Wiring
(click to enlarge)

Mtn

9/4/2025

Thanks for this diagram. I went to install this on our 2023 Sienna and wondered about the "extra" red wire (right). This made it make sense. Thanks!

Jameson C.

9/4/2025

@Mtn Glad we could help!

Answer 1

Hello Dan, We can most definitely get you set up to use your Redarc Tow-Pro Liberty brake controller in your 2022 Toyota Highlander. Since you were looking at the #ETBC7, I’m assuming your Highlander does not have the factory tow package. To equip…

view full answer...

Answer 2

Before you can install a trailer brake controller in your 2022 Toyota Highlander you'll first need to make sure that you have a 4-pole wire harness for your lights installed and then a 7-way wire harness to get your brake function. If you…

view full answer...

Answer 3

The Redarc Encapsulated Power Diode #RED34FR shouldn't be needed for installing the Redarc Tow-Pro Liberty #RED24FR and Pigtail #RED69FR on your 2020 Subaru Forester. The answer page you're referring to didn't have us telling someone to…

view full answer...

Answer 4

Hey Brendan, for your 2016 Toyota Highlander you would want the Redarc Tow Pro Liberty part #RED52VR which comes with the universal wiring harness and then for a dash mount you would want the part #331-TPSI-002. To install this we don't have any…

view full answer...

Answer 5

Yes you need the diode arrow to point towards the brake controller. That will allow the voltage to travel into the controller but not backfeed back on to the Highlander in any way. If you need a diode we have the part #RM-690.

view full answer...

Answer 6

No, you do not Jeff. The Redarc Tow-Pro Trail Brake Controller w/ Custom Harness item #RED74UR is a plug and play setup for your 2022 Toyota 4Runner. It already has the necessary wiring and diodes so the item #RED34FR diode is not needed. What kind…

view full answer...

Answer 7

Hello Greg, thanks for reaching out. The Redarc Tow-Pro Link Bluetooth Brake Controller #RED57AR will work great on your 2026 BMW X5 X40i with the factory tow package. We list it for vehicles without the tow package since it comes with a universal…

view full answer...

Answer 8

Hey Paul! Does your 2025 Toyota 4Runner have the factory tow package? If it does, there is a brake controller port you can use for plug and play installation. If you're using the Tekonsha POD #TK92UR you got before then you need the Tekonsha…

view full answer...

Answer 9

While I can sympathize with your issue, it is not safe to tow a trailer if you only have a 2" hitch ball and your trailer coupler is designed for a 2-5/16" hitch ball, even for a short distance; the insecure connection between hitch ball…

view full answer...

Answer 10

Hello John, thanks for reaching out. Does your 2025 4Runner already have a 7-way plug installed on the back? If no, you will need the #ETBC7 kit in order to use a brake controller. If you already have a 7-way you should already be prepped for a brake…

view full answer...

Answer 11

This is a common problem that I have seen when using the factory connector on your 2019 Toyota 4Runner. The ground wire for the brake controller is not capable of supporting the negative power from the Redarc Tow-Pro Elite #RED44FR. Redarc has their…

view full answer...

Answer 12

Whether you are using the user controlled mode (manual mode) or the proportional mode on the Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR there is no need for a diode. The only other thing you would need to install the RedArc Tow-Pro Eilte…

view full answer...

Is The Redarc Encapsulated Power Diode # RED34FR Needed On a 2016 Toyota Highlander W/ Redarc Elite?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching