Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Hello Chris. The #ETBC7 kit your mentioned can be used for this purpose. This is more of a universal solution that works on any vehicle. The #118283 that I mentioned is a custom wiring harness and will be a much better option. Since you already have…
view full answer...Hello Scott. The #ETBC7L kit is exactly what you need to upgrade your 4-flat to a 7-way and use the Curt Echo Controller. Since you have a boat trailer with a reverse lockout, you will need to locate the reverse light circuit on your vehicle. I do…
view full answer...I did some checking and the front wheel drive versions of the 2019 Cadillac XT5 can be towed on a tow dolly like the Roadmaster dolly part #RM-2050-1 that you referenced but the all wheel drive versions need to be towed on a tow dolly. I'd…
view full answer...Hey Albert, yeah finding the reverse light circuit on a vehicle can be somewhat challenging but I have some tips that will hopefully be helpful. So first thing to do is remove the interior panels on the rear hatch where the reverse lights are like…
view full answer...The Demco Air Force One Flat Tow Brake System #DM54YV is the kit specifically designed for 2019 and Newer Spartan K2 400 RVs which come prepped with the Safe Haul from the factory.
view full answer...If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…
view full answer...In order to flat-tow a 2012 - 2014 Honda CR-V with all four wheels on the ground behind a motorhome you are going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and possibly a high-low…
view full answer...Hi Henry, thanks for reaching out! The etrailer #e23ZR and Curt #C13416 trailer hitches are exactly the same, aside from the glossy vs matte black finishes like what you mentioned. I prefer the matte black powder coat because it looks better on…
view full answer...In order to tell if you have a factory tow package on your 2022 Kia Sorento, there will be tail light wiring connectors behind the rear driver's side tire. This will be on the exterior of the frame rail. In order to see these ports, you will have…
view full answer...Hey Robert, I spoke with both Ryan and Jake (installers here at etrailer) since they've both installed the Demco Tabless Base Plate Kit #DM77YV. Both Brad and Jake stated it's tough on the Mavericks and that they either drilled a self-tapping…
view full answer...Filter Your Search
Contact and Help