Recommended Hitch for a 2024 Mistsubishi Outlander PHEV

Question

Question:

I need a hitch for a 2024 Mistsubishi Outlander PHEV

asked by: Justin

0

Expert Reply:

Hey Justin. To add a hitch to your 2024 Mistsubishi Outlander PHEV, I recommend the Curt item # C86FV. This hitch is custom fit and specially designed for the PHEV model of your Outlander. It is a class III hitch with a 2" receiver, that has a 2,000 lbs towing capacity, and a 200 lbs maximum tongue weight.

If you are planning on towing you will also need a wiring harness item # C56434 and a ball mount kit item # C45534.

expert reply by: Jerred H

0

Answer 1

Hey again Daniel. Hope you are well! Yes, the Curt 13487 and the #C87WR hitch you see on our website are one and the same. We use our own unique part numbers for a lot of parts, especially Curt since a lot of theirs are only 5 digits. That said, the…

view full answer...

Answer 2

Hi Eddie! The EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2" #EH64CR is technically listed for only the PHEV models. The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C87WR is what I recommend for the 2022 Mitsubishi…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

Hey E. V.! I recommend the Curt Trailer Hitch Receiver #C86FV for your new Mitsubishi Outlander. This is a Class III hitch with a 2" receiver and a confirmed fit for PHEV models. The hitch has a bolt-on installation and a limited lifetime…

view full answer...

Answer 9

Hello T; the installation of the EcoHitch Stealth Trailer Hitch #EH64CR does not require drilling but it does require cutting. You will have to cut out a section from the bumper and exhaust panels, and part of the muffler shield. The rest of the…

view full answer...

Answer 10

Hey David! The correct hitch for your 2022 Mitsubishi Outlander SEL will depend whether your vehicle is gas-powered or a plug-in hybrid. For the gas-powered Outlander SEL, I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black…

view full answer...

Recommended Hitch for a 2024 Mistsubishi Outlander PHEV

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching