Will The Curt Trailer Hitch Receiver C13180 Replace the Factory Receiver If Swapping Rear Bumpers?

Question

Question:

I have a 2003 tundra with a factory installed hitch, not a dealer install, can i replace it with #c13180? I would certainly replace the bumper if i had to.

asked by: Scott M

0

Expert Reply:

You will be able to install the Curt Trailer Hitch Receiver # C13180 on your 2003 Toyota Tundra but it will involve removal and replacement of the rear bumper. You will have to source the correct rear bumper and its mounting hardware to be able to mount the Curt.

expert reply by: Bud M

0

Answer 1

Thank you for the picture of the rear bumper of your 2006 Toyota Tundra. Based on seeing that the Draw Tite hitch part #75105 that you referenced will fit it. I attached an install video for this hitch on a similar Tundra as yours for you to check…

view full answer...

Answer 2

The 2006 Tundra could have been equipped with the 'Factory' hitch two different ways. If it was a dealer installed option, it would simply bolt to the frame members but if it arrived from the factory with the hitch, the hitch is tied into the…

view full answer...

Answer 3

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75105 is a confirmed fit for 2000-2006 Toyota Tundra models with or without factory towable bumper. It is very possible that the manufacturer used different nut and…

view full answer...

Answer 4

I looked up the towing capacity for the 2000 Toyota Tundra and it ranges between 4,950 to 7,200 lbs (please confirm with your owners manual). If you are looking for a hitch that includes the bolts and no drilling required for installation, I…

view full answer...

Answer 5

All of the trailer hitches we have for your 2003 Toyota Tundra mount directly to the frame and don't use the brackets that the factory hitch and bumper use. So for your application I recommend replacing your OEM bumper with the Sport bumper since…

view full answer...

Answer 6

The answer to your question will depend on if you have the actual 'factory' hitch which is incorporated into the bumper brackets or the 'dealer installed' hitch which is just bolted to the frame. If you have the dealer installed…

view full answer...

Answer 7

Yes, Draw-Tite trailer hitch #75105 will fit your 2006 Toyota Tundra SR5 with factory towable bumper. I have linked a video showing an example installation for you. If you plan on doing some towing I recommend etrailer ball mount kit #989900. It…

view full answer...

Answer 8

Hey Dominick, thanks for reaching out! The Draw-Tite Max-Frame Trailer Hitch Receiver #75105 weighs 48-1/2 lbs. Just out of curiosity, what was your reasoning behind needing to know the weight?

view full answer...

Answer 9

The safety chain holes are well hidden on Curt trailer hitch #C13180. There is a part of the hitch above the receiver that attaches to the vehicle bumper. The holes are in that plate. I have included a picture pointing them out.

view full answer...

Answer 10

I have a better hitch solution that will fit regardless of your bumper style. The Draw Tite part #75105 fits the 2001 Toyota Tundra whether it has the factory towable bumper or not so it would be a great choice. The towable bumper is one that has a…

view full answer...

Answer 11

The Draw-Tite Max-Frame Trailer Hitch Receiver part #75105 is a confirmed fit for your 2006 Toyota Tundra as long as you are willing to remove the factory hitch if equipped. I went out to our warehouse and measured the overall dimensions for you…

view full answer...

Answer 12

Hi William; the Curt Trailer Hitch Receiver #13440 is only designed to fit the 2001-2007 Sequoia. The frames are different between the two vehicles. If you want a hitch for your 2002 Tundra you will have to get a different hitch like the Curt #C13180…

view full answer...

Will The Curt Trailer Hitch Receiver C13180 Replace the Factory Receiver If Swapping Rear Bumpers?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching