Highest Rated Trailer Hitch that Fits 2004 Toyota Tundra

Question

Question:

Thinking about purchasing a hitch for a 2004 Toyota tundra with standard cab for a friend he wants the heaviest duty one he can get is class 3 the only ones available n which brand is best weight rated

asked by: Michael J

0

Expert Reply:

The hitch we offer for a 2004 Toyota Tundra that has the highest towing capacities is the Curt # C13180 which can tow a trailer up to 6,000 lbs. It is a Class III but it's a higher rated Class III hitch.

expert reply by: Jameson C

0

Answer 1

The safety chain holes are well hidden on Curt trailer hitch #C13180. There is a part of the hitch above the receiver that attaches to the vehicle bumper. The holes are in that plate. I have included a picture pointing them out.

view full answer...

Answer 2

The 2006 Tundra could have been equipped with the 'Factory' hitch two different ways. If it was a dealer installed option, it would simply bolt to the frame members but if it arrived from the factory with the hitch, the hitch is tied into the…

view full answer...

Answer 3

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75105 is a confirmed fit for 2000-2006 Toyota Tundra models with or without factory towable bumper. It is very possible that the manufacturer used different nut and…

view full answer...

Answer 4

Thank you for the picture of the rear bumper of your 2006 Toyota Tundra. Based on seeing that the Draw Tite hitch part #75105 that you referenced will fit it. I attached an install video for this hitch on a similar Tundra as yours for you to check…

view full answer...

Answer 5

Hey Dominick, thanks for reaching out! The Draw-Tite Max-Frame Trailer Hitch Receiver #75105 weighs 48-1/2 lbs. Just out of curiosity, what was your reasoning behind needing to know the weight?

view full answer...

Answer 6

You will be able to install the Curt Trailer Hitch Receiver #C13180 on your 2003 Toyota Tundra but it will involve removal and replacement of the rear bumper. You will have to source the correct rear bumper and its mounting hardware to be able to…

view full answer...

Answer 7

I have a better hitch solution that will fit regardless of your bumper style. The Draw Tite part #75105 fits the 2001 Toyota Tundra whether it has the factory towable bumper or not so it would be a great choice. The towable bumper is one that has a…

view full answer...

Answer 8

The Draw-Tite Max-Frame Trailer Hitch Receiver part #75105 is a confirmed fit for your 2006 Toyota Tundra as long as you are willing to remove the factory hitch if equipped. I went out to our warehouse and measured the overall dimensions for you…

view full answer...

Answer 9

Hi William; the Curt Trailer Hitch Receiver #13440 is only designed to fit the 2001-2007 Sequoia. The frames are different between the two vehicles. If you want a hitch for your 2002 Tundra you will have to get a different hitch like the Curt #C13180…

view full answer...

Answer 10

Since you're willing to remove your 2005 Tundra's factory hitch, I recommend the etrailer Hitch item #e87KR. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity that can be increased to 7,500 lbs when used…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Highest Rated Trailer Hitch that Fits 2004 Toyota Tundra

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching