Recommendation to Replace Factory Trailer Hitch on a 2003 Toyota Tundra

Question

Question:

i own a 2003 Toyota Tundra limited edition 4X4 extended cab, The rear factory tow hitch is rotted causing and bumper brackets are rotted, The stock tow hitch is very costly. Do you sell a hitch replacement that will fit my frame and rear bumper without any alterations

asked by: Glenn

0

Expert Reply:

All of the trailer hitches we have for your 2003 Toyota Tundra mount directly to the frame and don't use the brackets that the factory hitch and bumper use. So for your application I recommend replacing your OEM bumper with the Sport bumper since it doesn't use the special brackets.

Then you can install the Curt Trailer Hitch # C13180 which mounts directly to the frame of your truck.

I know this isn't exactly what you're looking for, but it does give you a way to have a secured bumper and trailer hitch.

expert reply by: Jon G

0

Answer 1

Hey Mike! When you say you have the tow package option I'm assuming you have the factory hitch. None of the hitches will fit your Tundra as is since the factory hitch is tied into the rear bumper and bumper brackets. You will have to replace the…

view full answer...

Answer 2

I cannot find any reference to the part numbers you provided online. The Curt #C13180 Class III receiver hitch is a confirmed fit for the 2000-2006 Toyota Tundra. If you're needing the bolt hole spacing of the #C13180 that you'd looked at,…

view full answer...

Answer 3

Normally a bumper is rated at about 3500 lbs towing capacity. It is usually stamped somewhere on the bumper or possibly on a sticker. A frame mounted hitch is going to have more capacity for towing due to how it is installed. Also, most trailers will…

view full answer...

Answer 4

In most cases Loctite is not required when installing a trailer hitch, but it would not be a bad idea. I suggest using the Loctite Blue Stick Threadlocker, #LT37643, which will provide a secure grip and protect against water and grime.

view full answer...

Answer 5

The 2006 Tundra could have been equipped with the 'Factory' hitch two different ways. If it was a dealer installed option, it would simply bolt to the frame members but if it arrived from the factory with the hitch, the hitch is tied into the…

view full answer...

Answer 6

You will be able to install the Curt Trailer Hitch Receiver #C13180 on your 2003 Toyota Tundra but it will involve removal and replacement of the rear bumper. You will have to source the correct rear bumper and its mounting hardware to be able to…

view full answer...

Answer 7

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75105 is a confirmed fit for 2000-2006 Toyota Tundra models with or without factory towable bumper. It is very possible that the manufacturer used different nut and…

view full answer...

Answer 8

Yes, Draw-Tite trailer hitch #75105 will fit your 2006 Toyota Tundra SR5 with factory towable bumper. I have linked a video showing an example installation for you. If you plan on doing some towing I recommend etrailer ball mount kit #989900. It…

view full answer...

Answer 9

The answer to your question will depend on if you have the actual 'factory' hitch which is incorporated into the bumper brackets or the 'dealer installed' hitch which is just bolted to the frame. If you have the dealer installed…

view full answer...

Answer 10

I looked up the towing capacity for the 2000 Toyota Tundra and it ranges between 4,950 to 7,200 lbs (please confirm with your owners manual). If you are looking for a hitch that includes the bolts and no drilling required for installation, I…

view full answer...

Answer 11

Thank you for the picture of the rear bumper of your 2006 Toyota Tundra. Based on seeing that the Draw Tite hitch part #75105 that you referenced will fit it. I attached an install video for this hitch on a similar Tundra as yours for you to check…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Recommendation to Replace Factory Trailer Hitch on a 2003 Toyota Tundra

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching