Recommended Trailer Hitch Receiver And Wiring Harness For A 2023 Volvo XC90

Question

Question:

Hello, I’m looking for a viable towing harness package for a 2023 Volvo XC90 that will allow me to pull a single axle trailer. Thank you

asked by: Chester

0

Expert Reply:

For a 2023 Volvo XC90 we have two different trailer hitch receiver options available. The Hidden Hitch by Draw-Tite Trailer Hitch Receiver # DT82GR has a removable receiver to provide a clean factory look when not in use. Because of this it has a lower towing capacity at just 3,500lbs.

The other option is the Draw-Tite Max-Frame Trailer Hitch Receiver # 76194, which will stick out under your bumper but comes with a 6,000lb towing capacity.

Note: You'll need to check the towing capacity of your vehicle and go with whichever rating is lowest.

If you occasionally tow a trailer use trailer hitch accessories like a bike rack, cargo carrier, etc. and like to keep a factory look then I recommend the # DT82GR. If you plan on using your hitch regularly or need the extra capacity then the # 76194 is the best option.

For the wiring I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118683. This harness will simply plug into your factory tail light wiring for easy installation. You will need to run the ground wire to your vehicle's frame and will need to run the power wire for the ModuLite to the battery using the included fuse holder.

If that trailer has brakes then you'll also need to install a 7-way # ETBC7 and a brake controller to actuate the brakes on the trailer. The # ETBC7 will come with everything you need to upgrade from a 4-pole wire harness to a 7-way. For The brake controller I recommend the Redarc Tow-Pro Liberty Brake Controller # RED52VR. It has a super small footprint and is easy to use. I personally have this model in my truck and love it.

All-in-all the installation process for each of these parts is super simple, and if you choose to do it yourself then I recommend watching the attached installation videos below.

expert reply by: Kevin C

0

Answer 1

Unless you enjoy cutting and splicing wires, I strongly recommend going with the Curt T-Connector Vehicle Wiring Harness item #C84RJ over the item #C59236. The Curt item #C84RJ is custom-fit and plugs into your Volvo's wiring harness in your rear…

view full answer...

Answer 2

I would be happy to! To add a hitch to your 2024 Volvo XC60, I recommend the Draw-Tite item #76194. This hitch is custom fit and bolts to your Volvo with included hardware. I really like this hitch because the crosstube mounts behind the bumper cover…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

Hi Stephanie! Great question and you’re totally right to ask, because most hitches for the 2024 RAV4 do require a bit of bumper trimming. That includes the Oris Detachable Hitch #TS66VR, since it uses a hidden design that needs a hole cut in the…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 12

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...