Why Can't Draw Tite Hitch 76194 be Used with Weight Distribution

Question

Question:

Hi there, Trying to figure out why this hitch is not rated for use with a WDH? My Volvo owners manual ONLY states that WDH is not to be used with the factory Volvo hitch, which makes sense because it is an electrically articulated unit. Ive reached out to Draw-Tite and they never answered. Ive reached out to Volvo directly and they only advise that you talk to your local dealer, who of course doesnt know either way. I know theres the notion that unibody cars shouldnt use a WDH, but every car is different, and if a manufacturer wont respond with a definite answer, whos to know? Its very frustrating because all Id like to do is move about 100lbs back to the front axle using a WDH.

asked by: Mike

0

Expert Reply:

The reason the Draw Tite hitch part # 76194 can't be used with a weight distribution system is due to how it attaches to the vehicle. What we have found is that if it attaches along the bottom of the frame rails it can be used with a WD system, assuming the vehicle can handle it, but if it attaches to the back of the frame like this hitch it cannot be used with a WD. It just puts too much torque on a portion of the frame that is smaller so it can't handle the stress.

expert reply by: Jameson C

0

Answer 1

Hello Jon, I find it interesting that on the Draw-Tite you have to trim the heat shield and on the Curt you do not, which really is the case. With any aftermarket hitch there is always the possibility of the kick free sensor being covered, we…

view full answer...

Answer 2

Yes! There is a hitch that fits your 2023 Volvo XC90 Recharge, that will allow you to use your hitch mounted cargo carrier. - Draw-Tite Max-Frame Trailer Hitch Receiver #76194 This hitch will fit your XC90 Recharge and provide you with a 2"…

view full answer...

Answer 3

I recommend pairing the T-One Vehicle Wiring Harness #118683 with the Draw-Tite Max-Frame Trailer Hitch Receiver #76194 you found for your 2019 Volvo XC90 T6 Inscription. This harness will provide you with a 4-way flat to operate the lights on most…

view full answer...

Answer 4

Unless you enjoy cutting and splicing wires, I strongly recommend going with the Curt T-Connector Vehicle Wiring Harness item #C84RJ over the item #C59236. The Curt item #C84RJ is custom-fit and plugs into your Volvo's wiring harness in your rear…

view full answer...

Answer 5

I would be happy to! To add a hitch to your 2024 Volvo XC60, I recommend the Draw-Tite item #76194. This hitch is custom fit and bolts to your Volvo with included hardware. I really like this hitch because the crosstube mounts behind the bumper cover…

view full answer...

Answer 6

For a 2023 Volvo XC90 we have two different trailer hitch receiver options available. The Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT82GR has a removable receiver to provide a clean factory look when not in use. Because of this it has a…

view full answer...

Answer 7

Great question, Tex! You are correct that both the Curt #C92WR and Draw-Tite #76194 trailer hitch receivers have the same basic design for your 2024 Volvo XC60 Recharge. We actually had the opportunity to install the Curt on a 2024 XC60 so if your…

view full answer...

Answer 8

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver #76194 is a confirmed fit for your 2024 Volvo XC60. It has a 2" receiver opening with a 6,000lb GTW capacity and 900lb TW capacity, but you'll still want to verify the capacity of your XC60…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Why Can't Draw Tite Hitch 76194 be Used with Weight Distribution

Continue Researching