Recommended Anti-Rattle Device Compatible w/ etrailer Hitches

Question

Question:

Just checking on the collar size and if e87AR is compatible with p/n 63080. Thanks

asked by: Mark

0

Expert Reply:

I have a solution for you but the Draw Tite QSP anti rattle item # 63080 you referenced can only be used on Draw Tite hitches. For a similar option you will want to use the Hitch Receiver Immobilizer II item # BX88224 which can be used on etrailer hitches like the item # e87AR.

expert reply by: Jerred H

0

Answer 1

Hey Jeff, the WeatherTech ImpactLiner Custom Truck Bed Mat #WT99KF would get secured to your bed using the TechHold Retention Device (see image attached) which is just a adhesive ball and socket. Basically, one the ball end would get stuck to the…

view full answer...

Answer 2

I checked with my contact at Draw-Tite and was able to confirm that the Draw-Tite Front Mount Trailer Hitch Receiver part #65064 is a confirmed fit for your 2018 Chevrolet Silverado 1500. The Draw-Tite hitch has a 2" receiver tube opening with a…

view full answer...

Answer 3

Every hitch and drawbar will have some movement between them, it's unavoidable. Any manufactured product like a receiver hitch will have variances in its size. For instance, the Curt #14090 Class IV hitch has a 2 inch receiver. The actual…

view full answer...

Answer 4

I do have a solution for you, however the collar on the receiver portion of the Curt Trailer Hitch Receiver #C13152 that you mentioned is simply too large to accommodate fitment of the Draw-Tite QSP Trailer Hitch Silencer #63080. I went out to the…

view full answer...

Answer 5

The Roadmaster Quiet Hitch #RM-061 is one of our more popular anti-rattle devices. It has a very simple design while being very effective. The most important thing with this anti-rattle device is to make sure it's installed so that it is pulling…

view full answer...

Answer 6

Hey Sean, yes you can use the TowSmart Adjustable Ball Mount #TS89VR in the Gen-Y Voyager Ball Mount #GY52JJ. This will provide cushioning to the adjustable ball mount plus some additional drop. What are you planning on towing with this setup?

view full answer...

Answer 7

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 8

Hey Roger. With the battery and handle removed the Parkit360 Force Electric Trailer Dolly item #PA46VR weighs 80 lbs. The 12-volt battery alone is 23 lbs so removing it and the handle is definitely going to help with that heavy weight. What kind of…

view full answer...

Answer 9

Hey Mariela, yes the Parkit360 power dollies like the 5k part #PA96VR and the 10k version part #PA46VR does allow you to turn and maneuver the trailer into a parking spot like you are looking for. Is this like a food truck type trailer?

view full answer...

Answer 10

Hello Jacob, thanks for reaching out. We do carry the EcoHitch #EH75SR but I am sorry to say we do not offer the receiver attachment by itself. You may want to try reaching out directly to EcoHitch to see if they can provide one. Otherwise the only…

view full answer...

Answer 11

Hey Greg! Where did your Stromberg Carlson Base Pad Extreme #SC53VR crack? The Andersen Trailer Jack Block #AN39VR is a good alternative. It has the same 6,000 lb capacity and the design is a little more basic/straightforward which makes it less…

view full answer...

Answer 12

Hi Chris! The Parkit360 Force Electric Trailer Dolly - 10,000 lbs #PA46VR has a 2 prong plug (see attached image). I will admit to be surprised by that, but that is what they decided to go with. It isn't going to hurt anything though. What are…

view full answer...