Choosing Between Tekonsha or Curt Powered Taillight Converter/Wiring Harness for 2020 Honda Odyssey  

The Tekonsha T-One #118304 and Curt T-Connector #C55580 Vehicle Wiring Harnesses are very similar. These are both custom fit wiring harnesses that include a tail light converter, which is required for your 2007 Toyota Sienna because the brake and…

There is not an adapter so you'd need to make your own for your trailer with a 5-round connector like #PK11501. What you'd need to do is cut off the end of your 4-way and connect the wires to the terminals of the 5-Pole, Round Pin…

Probably the easiest way to handle this situation would be to use a 5-way connector, part #20017 for the trailer and part #HM37908 for the vehicle end. Use the extra wire for the brake light lead. If the trailer needs to be towed by another…

Other than the higher amperage rating offered by the Tekonsha #118741, there isn't much in the way of differences between it and the Curt #C56370. Both use solid state construction, the Curt uses the SMT which doesn't use through-holes in the…

For Curt trailer hitch #C12038 you will get the trailer hitch itself and the hardware needed to install it. The other parts you need depend on what you're going to use the htich for. If you're going to be carrying a cargo carrier or bike rack…

The Pollak 5-Pole, Round Pin Trailer Wiring Sockets, item #PK11502, and #PK11501, do not have a standardized wiring configuration. I normally direct my customers to the 6-way wiring configuration, eliminating the middle pin. Start by wiring the top…

I recommend the Hopkins Mounting Bracket #HM48605 for securing the Pollak 5-Pole, Round Pin Trailer Wiring Socket #PK11502. The Hopkins bracket has a slit in the bottom which allows you to easily attach and remove the connector without having to…

There is no adapter to go from a 4-Way flat to a 5-Way round connector so you have a couple of options. What I would do is to install a 4-Way flat using #119178KIT. Then use a 4 to 5-Way flat adapter, #20036. The extra wire on the adapter, normally…

I feel the etrailer Trailer Hitch Receiver #e23ZR is our best receiver for your 2023 Toyota RAV4. This is the only receiver with a matte black finish. This I feel better matches with the matte accent panels Toyota uses as well. The 4-Way Wiring…

Fascia trimming is required to install the etrailer Trailer Hitch Receiver #e98848 on your 2024 Honda CR-V, but this is the case for all of the hitches that fit your vehicle. According to the instructions you'll be cutting out a notch that is…

We have the best luck with the Prodigy P3 #90195 and P2 part #90885. There isn't a controller out there more reliable and better performing that these. The Curt Triflex part #C24VV isn't a bad controller but it's just not quite the same.…

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…