Which 6 On 5-1/2 Bolt Pattern Hubs Will Fit A 2008 M1101 HMMWV Trailer?
Published 01/19/2022
Products Featured in This Question
Question:
Hello, Ive been told you all are the very best at this, so please offer your insight! I have a 2008 M1101 HMMWV trailer with stock 8 lug hubs and Id like to change them out for 6x5.5 so I can use 2020 Ram 1500 wheels instead of the massive 37 Goodyear runflats. Will you advise what exact product I need for this? Note I plan to keep the hydraulic surge brakes for now and will change over to electric later. Thank You!
asked by: Darrin L
Expert Reply:
From what I could find, your 2008 M1101 HMMWV trailer will use the # 25580 inner bearing, but the outer bearing is proving to me more difficult to locate. It looks like it has a 1.25" inner diameter, which does match two hub and drum assemblies we have. These do use different seals though, so you will need to pull one hub, or both, so see which will be the correct option. I have both options listed below and these do have the needed 6 on 5-1/2 bolt pattern and 12" diameter drum.
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased # AKHD-655-6-K
Grease seal (included): GS-2250DL
Inner diameter: 2.25"
Outer diameter: 3.376"
Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2 # 8-201-5UC3
Grease seal (included): GS-2125DL
Inner diameter: 2.125"
Outer diameter: 3.376"
I do also need to mention that trailer wheels are lug centric and vehicle wheels are hub centric, so I cannot say the Ram wheels will fit these hubs properly. So just a heads up on that.
Product Page this Question was Asked From
Trailer Hub Grease Cap, 2.72" OD Drive In - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 2.72 Inch O.D.
- 2.72 Inch
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: timken 412920
- Search Results: wheel bearing grease
- Search Results: grease cap
- Search Results: 25580 / 14125a trailer hubs and drums
- Search Results: 25580
- Search Results: cotter pins
- Q&A: Replacement Hub w/a 6 on 5-1/2 Bolt Pattern for a M1101/2 Trailer
- Q&A: Parts Needed to Replace Axle on M416 Trailer with 6 Lug Toyota Pattern with Parking Brake
- Q&A: Parts Needed To Install 6 on 5-1/2" Brake Hub/Drums on a M1101 Military Trailer
- Search Results: dinoot no weld rack
- Video: Converting Your M1101 Military Cargo Trailer to 7 Way Wiring
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Q&A: Replacement Trailer Hub/Drums For A 2006 M1101 Military Trailer
- Q&A: Replacement Bearings for Silver Eagle M1101 Trailer
- Q&A: How to Determine Replacement Hub for M416 Military Trailer
- Q&A: Determining Which Replacement Hub With 5 on 5 Bolt Pattern For M416 Military Trailer
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Video: Dexter Breakaway and Parking Kit for Drum Brakes: The Breakdown
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Shop: Replacement Trailer Wheel Bearing - 25580 - Qty 1
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Replacement Race 25520 for Bearing 25580 - Qty 1
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 5 Bolt - 3.5K
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased
- Shop: Trailer Hitch
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
on Trailer Bearings Races Seals Caps
