Search: cotter pins   >  

Hey Matthew thanks for the pictures! That's an AL-KO/Hayes axle and the correct brake assemblies are the Dexter Electric Trailer Brakes item #23-105-106-09.

Hey Matthew! You can email me those pictures at the address you receive this response from but what I really need to know is the size of your current brake assembly and the mounting pattern of the bolts that attach it to the flange on your axle.…

Hey Dan, The info you provided does tell us a bit about the axle but isn't enough to look up what components go with with it. With it being a 3,500lb axle it's probably a generic 3,500lb kit for the bearings and seals but I'd hate to not…

Hi Ray, the bolt hole spacing for the etrailer Electric Trailer Brakes #AKEBRK-35-SA is 2-7/8" on center, so these sound like they'll work perfect for you.

Hi Rusty; the Dexter #84546UC3-EZ and etrailer #AKHD-5475-35-K will both fit a 3,500 lb axle but they have different bolt patterns. You already ordered the Dexter in the past so I'm assuming your wheels are 5 on 4-1/2. For the same bolt pattern…

Hello Jose, thanks for reaching out. What I recommend for your are the Dexter Electric Trailer Brakes #K23-086-087-00. These are the standard 10" x 2.25" brakes and they are parking brake compatible. The Dexter brakes use the same 4 bolt…

Hey Isaac! While we don't have one specific all in one kit we do have every component you will need to update your trailer's lighting and brakes. I recommend using the Trailer Wiring Kit item #ET7WK. This includes a 7-Way connector, a…

I would be happy to help! Unfortunately we do not have a breakdown of the specific components for your Spartan Sport Trailer, so you will need to remove one of your hub assemblies. With the hub assembly removed you will need to look on the face of…

The BTR and BT8 denotations refer to the spindle, not the trailer hub. The difference between a BTR and BT8 spindle is that the BTR spindle uses a 1.063" diameter L44649 bearing and the BT8 spindle uses a 0.99" diameter L44643 bearing. In…

Hey David, Just to doublecheck I recommend measuring point B from the diagram below to see what your grease seal inner diameter is. If it's 1.25" and the inner diameter of the bearings is 1.00" then you would have a BT8 spindle and…

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

I did some research and it looks like the only difference between your 023-459-01 kit and the Dexter Nev-R-Adjust Electric Trailer Brake Assembly #23-459 is that your kit came with 33" leads and the other kits #23-459 & #23-458 do not. So,…