Replacement 5-on-4-1/2 Bolt Pattern Hubs for M-416 Military Surplus Trailer
Updated 05/22/2014 | Published 05/21/2014
Question:
I have an M-416 military surplus trailer. Do you have hubs that I can put on with a 5X4.5 bolt pattern? I was told you were the guys who knew how to do this. Thank you for your help.
asked by: Winston K
Helpful Expert Reply:
You can use the link provided to review our available hub assemblies in the 5-on-4-1/2 bolt pattern. First, you can choose the type of hub - idler, hub-with-drum or hub with rotor - by using the filters on the page. Based on my research your M-416 came equipped with drum brakes, so once you click on that type you can use your original bearing numbers to identify a suitable replacement hub. You will want to confirm the axle's capacity (there should be a sticker or plate on it to indicate its weight rating) to ensure your selected hubs are rated appropriately.
The linked article and video may be helpful.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: grease cap
- Search Results: cotter pins
- Search Results: timken 412920
- Search Results: 25580 / 14125a trailer hubs and drums
- Search Results: wheel bearing grease
- Search Results: 25580
- Q&A: Replacement Hub w/a 6 on 5-1/2 Bolt Pattern for a M1101/2 Trailer
- Search Results: dinoot no weld rack
- Q&A: Parts Needed to Replace Axle on M416 Trailer with 6 Lug Toyota Pattern with Parking Brake
- Video: Converting Your M1101 Military Cargo Trailer to 7 Way Wiring
- Q&A: How to Determine Replacement Hub for M416 Military Trailer
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Q&A: Replacement Axle, Brake Assemblies, And Hubs And Drums For M1101 Trailer
- Q&A: Parts Needed To Install 6 on 5-1/2" Brake Hub/Drums on a M1101 Military Trailer
- Q&A: Pintle Hook that Can be Used with Military Trailer M1101/M1102
- Q&A: Which 6 On 5-1/2 Bolt Pattern Hubs Will Fit A 2008 M1101 HMMWV Trailer?
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 1,200 lbs
- Video: Dexter Breakaway and Parking Kit for Drum Brakes: The Breakdown
- Shop: Dexter Electric Trailer Brakes - Parking Brake Ready - 12" - Left/Right Hand Assemblies - 6K
- Shop: Replacement Trailer Hub Bearing - LM67048
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Shop: Replacement Race for 25580 Bearing
- Shop: B&W Pintle Hook Mounting Plate for 2" Hitches - 15" Shank - 14 Hole - 16,000 lbs
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Shop: Trailer Wiring
- Article: How to Measure for Trailer Hitch Drop
on Trailer Hubs and Drums
