Parts Needed To Install 6 on 5-1/2" Brake Hub/Drums on a M1101 Military Trailer
Updated 08/21/2023 | Published 08/19/2023
Products Featured in This Question
Question:
M1101 Military trailer hub and brake drum conversion to Toyota 6 x 139.7mm 5.5" question. I am wanting to convert my M1101 trailer 8 x 6.5inch hubs and drums over to Toyota/Lexus 6 x 5.5" hubs and drums. Do you have a kit with both hubs, drums, complete with bearings/seals?
asked by: Eric T
Expert Reply:
First you are going to want to disassemble one of your hubs to verify if you have the #42 Spindle # TRU37FR. I have found this is the spindle some have found but you will need to determine it is what you have and if not you will need to have a pair of the spindles welded onto your axle. This will then allow you to install the Electric Brakes # AKEBRK-7-SA along with the 2 of the 6 on 5-1/2" Drum/Hubs # AKHD-655-6-EZ-K. The hubs are complete with bearings pre-greased and seals inserted in the hubs allowing you to easily slide them on the spindles.
Product Page this Question was Asked From
#42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- With Flange
- 25580
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Continue Researching
- Search Results: lock n roll
- Search Results: dexter 008 201 09
- Search Results: 023~112~00
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: 6 on 5~1/2 inch trailer hubs and drums
- Search Results: 6 on 55 hubs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Search Results: dexter 023~112~00
- Search Results: 008~201~09
- Shop: Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long
- Shop: Lock N Roll Articulating Coupler with 30" Extension - 2" Receivers - Trailer Side - 11K
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
- Q&A: How to Find the Spindle Number on a Trailer Axle
- Shop: Buyers Products Weld-On Receiver Tube with 2" Hitch Receiver - 48" Long - 20K
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Q&A: Looking For New Wheels For M1101 Army Trailer
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Q&A: Replacement Hubs Compatible with Dexter Mobile Home Axle
- Shop: Trailer Wiring
- Q&A: Parts Needed To Add Brakes To An Axle
- Video: Review of the Ark Articulating Off-Road Coupler for 2" Receivers
- Shop: Roof Rack
- Video: Review of Dexter Trailer Brakes - Electric Brake Assembly - 23-113
- Video: Review of DeeMaxx Brake Actuator - Electric-Hydraulic Brake Actuator - DE97SR
- Article: Trailer Lighting Requirements
- Q&A: Recommendation For Brakes And Drums For 3,500 Pound Capacity Axle
- Video: Titan Brake Actuator T4846500183 Review
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Q&A: Parts Needed To Convert M1101 Military Trailer To Electric Drum Brakes
- Video: Comprehensive Review: Dexter Trailer Axle w/ Electric Brakes
on Trailer Spindles
