Determining Which Replacement Hub With 5 on 5 Bolt Pattern For M416 Military Trailer
Updated 01/25/2021 | Published 01/22/2021
Products Featured in This Question
Question:
My question is concerning a M416 military trailer. My intention are to change the hub and drum to get a 5x5 bold pattern. Thanks for your help!
asked by: William
Expert Reply:
Thanks for the picture!
To determine the correct replacement hub to give your M416 military trailer the 5 on 5 bolt pattern you are looking for, you will need to determine the inner and outer bearings your current hub uses.
The easiest way to do this is by pulling one of the hubs off, and reading the bearing number stamped on the face of the bearing like on the included picture of the # L44649.
If your bearings are worn to the point that you cannot read the bearing numbers, you will need to use digital calipers like # PTW80157 to precisely measure your spindle according to the included diagram.
The Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles # 84556UC3 you were looking at use inner bearing # L68149, and outer bearing # L44649 so as long as you have the same bearing combination this would be a great option for you, and at this time we do not have 5 on 5 bolt pattern hubs that use any other bearing combination.
I included a video of the # 84556UC3 for you to take a look at.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 25580
- Search Results: timken 412920
- Search Results: cotter pins
- Search Results: 25580 / 14125a trailer hubs and drums
- Search Results: wheel bearing grease
- Search Results: grease cap
- Q&A: Replacement Hub w/a 6 on 5-1/2 Bolt Pattern for a M1101/2 Trailer
- Search Results: dinoot no weld rack
- Q&A: Parts Needed to Replace Axle on M416 Trailer with 6 Lug Toyota Pattern with Parking Brake
- Video: Converting Your M1101 Military Cargo Trailer to 7 Way Wiring
- Q&A: Replacement Trailer Hub/Drums For A 2006 M1101 Military Trailer
- Q&A: Replacement Bearings for Silver Eagle M1101 Trailer
- Q&A: Which 6 On 5-1/2 Bolt Pattern Hubs Will Fit A 2008 M1101 HMMWV Trailer?
- Q&A: How to Determine Replacement Hub for M416 Military Trailer
- Q&A: Replacement Axle, Brake Assemblies, And Hubs And Drums For M1101 Trailer
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Video: Dexter Breakaway and Parking Kit for Drum Brakes: The Breakdown
- Shop: Replacement Trailer Wheel Bearing - LM67048 - Qty 1
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Replacement Trailer Wheel Bearing - 25580 - Qty 1
- Shop: Replacement Trailer Wheel Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, Seal 10-36
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K and 4.4K Axles - Qty 2
- Shop: Trailer Wheel Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, GS-2125DL Seal
- Shop: Dexter Grease Cap with 2.72" OD - Fits 12" x 2" 8-Bolt Hubs - Zinc-Plated - Qty 2
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Video: Measuring To Choose The Right Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
on Trailer Hubs and Drums
