Replacement Trailer Hub/Drums For A 2006 M1101 Military Trailer
Question:
I have a M1101 Military Trailer and looking for a replacement wheel hub/drum. I bought at an auction and its missing the hub Axle still there. It has a 8 lug pattern. Do you sell a replacement hub for a 2006 M1101 trailer?
asked by: Jason
Expert Reply:
Hi Jason,
In order to find the correct hub/drum for your M1101 trailer we'd need to first determine what your bearings and grease seal are and the axle capacity. If the other hub you have has anything stamped into it we can also try looking up what they are using those numbers. If the bearings and seals no longer have part numbers stamped into them then you'll need to measure the spindle at points B, C, and D with a caliper # PTW80157 to get the inner diameters and the hub bore hole for the outer diameter.
With the inner/outer dimeter measurements and axle capacity I can look for a compatible replacement.
(click to enlarge)
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 5 Bolt - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- EZ Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: m1101
- Q&A: Parts Needed To Convert M1101 Military Trailer To Electric Drum Brakes
- Shop: Dexter Electric Trailer Brakes - Parking Brake Ready - 12" - Left/Right Hand Assemblies - 6K
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb Axles - 12" - 6 on 5-1/2
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 42865~kit
- Q&A: Replacement Axle, Brake Assemblies, And Hubs And Drums For M1101 Trailer
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Q&A: How to Pick Out a Trailer Hub and Drum and Then Brake Assembly to Fit It
- Video: Complete Breakdown of the Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Video: The Low-Down on the Trailer Hub and Drum Assembly
- Search Results: k08~201~97
- Video: The Low-Down on the Dexter Trailer Idler Hub Assembly
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 12" Diameter - 8 on 6-1/2
- Search Results: dexter 008 201 05
- Search Results: 25580 bearing
- Article: Trailer Wiring Diagrams
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
- Q&A: Recommendation to Add Electric Brakes to a M101A1 Military Trailer While Retaining Parking Brake
- Q&A: Does Drum Width Matter when Picking Out Replacement Hub/Drum for Trailer Axle
- Q&A: Replacement Hub and Drum With 25580 Inner Bearing and LM67048 Outer Bearing
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Q&A: Are The Electric Trailer Brake Assemblies AKEBRK-7R-SA Available Individually?
- Video: Hands-On with the Electric Trailer Brake Assembly
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Search Results: brake backing plate
on Trailer Suspension Parts
