bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Trailer Bearings Races Seals Caps


  • Electric Brakes for 10 x 2-1/4 Drums on 3,500 lb Axle & How to Determine Correct Bearings
  • Let's start with the brake assemblies, which you were kind enough to give the dimensions on for the drum, as well as the axle capacity, which are the most important things. For self-adjusting electric brakes I recommend the Electric Trailer Brake Kit - Self-Adjusting # AKEBRK-35-SA. These brakes will fit your brake mounting flange and fit your 10" x 2-1/4" drum; you will simply need the Mounting Hardware for 10" Brake Assemblies # BRKH10B. As for the bearings, the most likely kit...
    view full answer...

  • Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
  • The UFP H-1377 correlates to a Dexter #84 spindle, which is for a 3,500 pound axle. This will utilize an inner bearing # L68149 and an outer bearing # L44649. As this is being used on a boat trailer, I highly suggest going with the etrailer.com # AKIHUB-545-35-G-EZ-K. This is galvanized and will be the best option available for your trailer. This also includes both the inner and outer bearings, the grease seal, the grease cap, and the lug nuts.
    view full answer...

  • Determining Replacement Hub And Bearings For Dexter P-12 SLR Trailer Axle
  • I can definitely help you find the correct replacement hub and bearings for your Dexter P-12 SLR axle, but since part of the serial number was unreadable you will need to take a few simple steps to identify which bearings your axle uses. The easiest way to accomplish this is to remove one hub and look for the numbers stamped on the inner and outer bearing like shown in the attached picture of the # L44649. If your bearings are too worn to be able to read the numbers, you will need...
    view full answer...

  • Wheel Bearings for 6,000 lb Trailer Axle
  • The bearings we offer are from TruRyde, and the most typical bearings for a 6,000 lb axle are # 25580 for the inner bearing and # 15123 for the outer bearing. These also come in a kit depending on the inner diameter of your grease seal; the Bearing Kit # BK3-100 comes with these bearings, their races and a grease seal with a 2.250" inner diameter. Bearing Kit # BK3-110 has the bearings and races with a grease seal that has a 2.125" inner diameter. I have added a link to a help article...
    view full answer...

  • Replacement Bearings and Brake Assemblies For 1998 Dexter 9000lb Axle
  • Thank you for the pictures and information of your axle! I called Dexter and your Dexter P12 SLR axle with Serial Number D-423-4057 has a 9000lb axle rating, and uses an 8 on 6-1/2 hub and drum assembly with 5/8" studs like you mentioned. For replacement bearings there is not a kit that has all of the bearings and races but you can purchase them all separately as follows: Inner Bearing # 387A Inner Race # 382A Outer Bearing # 25580 Outer Race # 25520 Oil Seal # 10-51 And Oil...
    view full answer...

  • Determining Correct Replacement Bearing Kit For Dexter 7000lb Axle
  • There are two bearing kits for a Dexter 7000lb axle with the only difference being the grease seal. You will want to use a set of digital calipers like # PTW80157 to measure the spindle where the grease seal rides as shown in the included diagram. If your grease seal measurement is 2.250 you will need # BK3-200, or if your grease seal measurement is 2.125 you will need # BK3-210. You will need a Bearing Kit for each side of the axle. If you don't already have grease for the new bearings...
    view full answer...

  • Disc Brake Conversion Parts For 10,000 lb Dexter Axle Made Before 2009
  • Thank you so much for that information, and we can get you everything you need to convert to a disc brake set up for your 10k Dexter axles. While there isn't a single kit, we do have all of the parts you need, and let's start with the brake kit itself: - Kodiak Disc Brakes - 11" Rotor - 8 on 6-1/2 - Raw Finish - Leaf Spring - 10K Dexter and Lippert # K2R1058D11 This kit is designed to fit your 10k Dexter axles from pre-2009, which is why the year is important, and has all the parts...
    view full answer...

  • Wheel Bearing Kit for Dexter 5 Lug Trailer with 3500-lb Axles
  • For your Dexter 3500-lb 5 Lug axles you will need # BK2-100 . This kit comes complete with all of the bearings and seals you need to replace on 1 hub.
    view full answer...

  • Replacement Bearing Kit and Tools to Install on 2014 Forest River R-Pod Travel Trailer
  • The Bearing Kit # BK2-100 should contain all the correct bearing, seals and races for 1 wheel. I always recommend pulling one hub apart and confirming the correct spindle. These fit the most commonly used axles under your 2014 Forest River R-Pod 179 but that is not a guarantee as manufacturers sometimes change components or the part were changed by a previous owner (See Picture and Article). A Seal Puller # PTW1219 will help you remove the old seal off the hub. The 7-Piece Installation...
    view full answer...

  • Bearings For Older Trailer Hub 22834
  • It sounds like you have the older hub 22834 that is no longer in production that takes the outer bearing of part # 1779 and inner bearing of part # 2788. I was not able to find any other bearings that measure .093" inner diameter besides 1779 or any other bearings that measure 1.50" inner diameter besides 2788. Any other size bearings will not fit the spindle. Your best option is to get a new axle if you would like to find a new more modern hub that fits the spindle. Measure from the...
    view full answer...

  • 2.24" Grease Cap Replacement
  • I have a solution for you but we do not have any standard grease caps with a 2.24" diameter like the # RG04-020 . I recommend going with the Bearing Buddy Bearing Protectors # BB2240 which will not only protect your bearings but provide an easy, safe way to monitor and control the level of grease in your axle hub. These are especially helpful on boat trailers, since they seal out all water, dirt and debris and allow for complete submersion. I've attached a brief video review of the...
    view full answer...

  • Replacement Bearing Grease Seal for Dexter 010-036-00
  • The Grease Seals 10-36 (pair) # RG06-070 cross references as the fit for your 010-036-00 seal. This seal has an inner diameter of 2.250 inches and outer diameter of 3.376 inches. The Grease Seal - Double Lip - 2.250" ID - 3.376" OD # GS-2250DL is the single seal option for this. The cross-references don't always show all the seal options but these are the two seals I can confirm fit based on your part number.
    view full answer...

  • Replacement Bearings for Dexter 5,100 Pound Axle on Grand Design Trailer
  • I reached out to my contact at Dexter and with the serial number you provided they were able to track down the correct replacement bearings for the spindles on your axles. For the inner bearing you will use part # 25580 for the bearing itself and # 25520 for the race. For the outer bearing you will use part # LM67048 for the bearing and # LM67010 for the race. The correct grease seal is part # RG06-070. For a complete kit that includes these bearings, races, and seal, you can use...
    view full answer...

  • Replacement Bearings and Hub for Malone MicroSport Trailer
  • The Malone MicroSport trailers like you have use the bearing kit part # BK1-100 that you mentioned which comes with the correct seal size. Or for a replacement hub that comes pre-greased part # 34822545BX. Then for a heavy duty and waterproof grease you'd want the LMX Red part # L11390 and you'd be set.
    view full answer...

  • Where to Measure When Replacing a Trailer Hub
  • With the measurements you got, the closest we will have is the # AH15450ECOMP. This is an agricultural hub the uses the outer bearing # LM11949, which does match the .75", but the inner bearing does not match. This uses a # LM67048 that has a 1.250" inner diameter. This is the closest I could find to the 1.1895" you got. That being said, it may not hurt to measure again to double check. There are also typically number on the bearings, but these do wear off over time. If this has happened,...
    view full answer...

  • Replacement Bearings, Races, Seals, and Brakes For a Dexter D35 and D44 Axle
  • Both your axles will use the same Grease Seal # 58846. I am going to list all the common replacement parts for each axle so that you have that information. 4,400lb Axle Inner Bearing # L68149 Outer Bearing # LM67048 Inner Race # L68111 Outer Race # LM67010 Grease Seal # 58846 Brake Assemblies # K23-462-463-00 3,500lb Axle Inner Bearing # L68149 Outer Bearing # L44649 Inner Race # L68111 Outer Race # L44610 Grease Seal # 58846 Brake Assemblies # 23-468-469
    view full answer...

  • What All Do I Need To Add Electric Brakes To My Trailer With A Dexter 2,500 Pound Axle?
  • We definitely have what you need to add electric brakes to your trailer. I spoke with Dexter to make sure I recommended the correct parts for you, and the spindles that were used on your 2,500 pound axle is actually the same one used on the very common 3,500 pound #84 spindles. This makes life a lot easier and you will need the Easy Grease Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K to start the process off. This is just one though, so you will need two of them to complete one axle....
    view full answer...

  • Which Bearing Kit Fits a Dexter 5100lb Axle?
  • Thanks for the pictures of the axle information! Based on the information you provided your axle uses the following components: Inner bearing # 25580 Inner race # 25520 Outer bearing # LM67048 Outer race # LM67010 Grease Seal # GS-2250DL All of these components are included in the Bearing Kit # BK3-300 you were looking at. I included a video of the # BK3-300 for you to take a look at.
    view full answer...

  • Replacement Hub Assembly for T.D.E. 11033
  • From what I was able to find out from my research, the Tie Down Engineering 11033 hub has a 5 on 4-1/2" bolt pattern and is designed for 3500-lb axles. Replacement hubs that have these specs typically use a # L68149 inner bearing and # L44649 outer bearing, as well as inner race # L68111 , outer race # L44610 and grease seals with inner diameter of 1.719" and outer diameter of 2.565". You'll want to verify that your current hubs have these bearings, races and seals to ensure that a...
    view full answer...

  • Bearing Replacements for AL-KO T44 Trailer Axles
  • The Al-KO T44 axle uses the bearings # L68149 inner bearing and # LM67048 outer bearing. For the seal you'd need the part # RG06-050 and you'd be set.
    view full answer...

  • How to Determine Correct Nev-R-Lube Bearing/Hub Assembly
  • From the pictures you sent in it looks like the inner diameter of your Nev-R-Lube bearing is about 2" which means you'd need the 50MM Nev-R-Lube Bearing for 8,000-lb Dexter Axles # 31-71-3. Aside from that you're basically just going to need to pull that bearing and measure the inside diameter to determine if the 50MM # 31-71-3, 42MM # 31-73-3, or 35MM # 31-72-3 bearing will best fit. The part 008-402-81 that you referenced finding somewhere else looks to be a hub assembly for a disc...
    view full answer...

  • Bearing Kit for Older Trailer Hub with LM67048 Inner and LM11949 Outer Bearing
  • We don't offer a kit for that hub, but we definitely have the bearings and races and possibly the seal which can be purchased individually. You'll need the # LM67048 bearing, its # LM67010 race and the # LM11949 bearing and its # LM11910 race. I don't have enough information to determine the grease seal you'll need, but it'll have an outer diameter of 2.328 inches. We offer two seals with this OD. You can determine if one of them will work for you by using a digital caliper like # PTW80157...
    view full answer...

  • Replacements Needed For A 2007 Lippert 4,400 Pound Trailer Axle
  • We definitely have the replacements needed for your Lippert 4,400 pound axle. Knowing it is a 2007 model axle helps as the brakes will be specific to axles prior to May 2009. With that said, you will need the Dexter Electric Brake Kit for 4.4K Axles # 23-454-455. This will replace both the right and left side brakes and will bolt right up. For the bearings, we do have what you need separately, but as this is a fairly uncommon size axle, we do not have an inclusive package. I have the...
    view full answer...

  • Recommended Trailer Hubs for 2,200 Pound Axle with L44649 Bearings and 5 on 4-1/2 Bolt Pattern
  • I recommend our etrailer hubs for your trailer. I've linked the complete selection that fits with your # L44649 bearings. Which ones are exactly the right ones depend on your trailer's wheel size and if it has brakes or EZ lube spindles: Idler hubs 12 inch or smaller wheels: Standard spindles - # AKIHUB-545-2-2K EZ lube - # AKIHUB-545-2-EZ-2K Idler hubs 13 to 15 inch wheels: Standard spindles - # AKIHUB-545-2-LF-2K EZ lube - # AKIHUB-545-2-LFEZ-2K Hub and drums for brakes: Standard...
    view full answer...

  • Replacement Bearings and Hub For 2007 EZ Loader Trailer Model With BT150A Oil Bath Hub
  • The EZ Loader with the BT150A Oil Bath hub uses a wheel bearing kit 300-020885 which includes wheel bearing part # L44649 for the inner and outer bearing, seal part # 34823 and race part # L44610. From my research it looks like your hub is an idler hub, you can use CE Smith Trailer Hub Assembly part # CE13311 to replace your hub. This hub comes with the bearings, seal and race to fit your spindle and it is pre-greased. It is rated for 2,700-lb Axles so you do want to make sure your...
    view full answer...

  • What is Difference Between Trailer Bearings L44649 vs L44643
  • The bearing part # L44649 has an inner diameter of 1.063 and is typically used in 3,500 lb axle hubs and the # L44643 has an inner diameter of 1 inch and is typically used on 2,000 lb axle hubs. If you can get me more info on your trailer like axle capacity and wheel bolt pattern I can help you pick out the components you are looking for.
    view full answer...

  • Replacement Hub Needed for Dexter Axle 8-256
  • Your Dexter Axle hub 8-256 should use an # L68149 inner bearing and an # L44649 outer bearing which means you have a #84 spindle and you'll use one of the following hubs: 5 on 4-1/2" - part # 84545BX 5 on 4-3/4" - part # 845475UC1 5 on 5" - part # 84550BX 5 on 5-1/2" - part # 84555UC1 Just match up the bolt pattern and you'll be good to go! I've attached some helpful articles on bolt patterns that you can check out if you aren't sure what you have.
    view full answer...

  • Replacement Bearings for Dexter Parts 031-017-02 and 031-030-02
  • I was able to cross reference the Dexter part number 031-17-02 to a # 14125A bearing and part 031-030-02 to a # 25580 bearing, and we do have these replacement parts with a grease seal in a complete kit for you. For a replacement bearing/race/seal kit, you'd use part # BK3-200, which includes the 14125A outer bearing, the 25580 inner bearing, the 10-36 grease seal and a replacement cotter pin. We do also have replacement hubs as part # 8-219-13UC3 and replacement self adjusting brake...
    view full answer...

  • Picking Out Bearing Buddy for Harbor Freight Trailer
  • In order to pick out the correct bearing buddy you will need know the pilot hole of your hub. To do this, remove the wheel and tire and remove the grease cap from the center of the hub. Usually it is a metal cap that is just lightly hammered into place. Use a screwdriver to pry off the cap. Clean the grease off and measure the opening. I have included a video demonstrating the Bearing Buddy. The Bearing Buddies # BB1980A-SS for example are for hubs with a 1.98 inch hub bore.
    view full answer...

  • Replacement for UFP PD1700 Idler Hub on Magic Tilt Boat Trailer
  • Your Magic Tilt boat trailer uses UFP hubs and bearings. In my research I found that your spindles are compatible with the L68149 inner and L44649 outer bearing and the 10-19 grease seal. For the proper replacement hub, use # AKIHUB-545-35-K which includes the appropriate bearings, races and grease seal. The hub is pre-packed with grease and even includes the lug nuts and grease cap. If you wanted to go with a Bearing Buddy bearing protector, the correct size for this hub would be...
    view full answer...

  • Replacement Dust Cap for Lippert 4,400 lb EZ Lube 176207 Axle
  • I reached out to Lippert and my contact was able to confirm that the hub bore on you 176207 4,400 lb axle is 2" which means you can use the Replacement Dust Cap # DC200L-DCRP or get it in a 2-pack as part # RG04-040.
    view full answer...

  • Bearing Kit for Trailer with 3,500 lb Axle
  • For a 3,500 lb axle bearing kit what you'd want is the # BK2-100 and you'd be set. This comes with the needed bearings and seal.
    view full answer...

  • Replacement Bearing Kit For a 2021 Grand Design Reflection 312BHTS With Dexter 5,200LB Axles
  • Your Dexter axles on your 2021 Grand Design Reflection 312BHTS travel trailer will need the Bearing Kit # BK3-300 to replace the bearings, races and grease seal for one hub on your axle. I recommend using the LubriMatic LMX Industrial Strength Grease # L11390 with your new bearings as it is designed to work best in high stress situations with extreme temperatures. Its superior adhesion also ensures that it sticks to the bearings and won't just fling off.
    view full answer...

  • Replacement Hub for Boat Trailer Using L44643 Bearings
  • Assuming you have a # L44643 inner and outer bearing, the correct bearing kit is the # BK1-100. The hub will depend on the bolt pattern you need. These hubs will come pre-greased and include the bearings, races, and grease seals. For a 4 on 4 I recommend the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased # CE13110. For 5 on 4-1/2 I recommend the Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased # AKIHUB-545-2-LF-1K....
    view full answer...

  • Replacement Bearings and Seals for Lippert 4,400 Lb Axle
  • The Lippert 4,400 lb axles use the same bearings and seals as a Lippert 3,500 lb axle so you can use the Bearing Kit for #84 Spindle part # BK2-100 or just the Grease Seal part # RG06-050.
    view full answer...

  • Replacement Bearing Kit for Lippert 3500lb Axle
  • The Bearing Kit # BK2-100 is the correct kit for your Lippert 3500lb axle. This will include the inner and outer races and bearings with a new grease seal, cotter pin and tang washer. I recommend using a Bearing Packer # PTW1218 with LubriMatic LMX Industrial Strength Grease # L11390 for the new bearings. This will ensure that you get grease throughout the bearing before installation.
    view full answer...

  • How to Pick Out Correct Size Bearing Buddy
  • To find the correct size Bearing Buddy for your log splitter, you need to measure your hub bore diameter. I have attached a photo to show you where to take this measurement. A digital caliper like # PTW80157, will provide the most accurate measurement. Bearing protectors like # BB1980A, take the place of a regular grease cap. Since grease caps can easily bend/deform when being removed, measuring the actual hub bore on which they fit is what's recommended. For example, Bearing Buddy...
    view full answer...

  • Bearing Kit for #84 Spindle, L44649/L68149 Bearings & EZ Loader Trailer 3700# Axel
  • Yes, we have these items individually as well as in kit. The EZ-loader’s Bearing Repair Kit you referenced is 2ea L44649 Bearings (Outer) - L44610 Races (Outer) - L68149 Bearings (Inner) - L68110 Races (Inner) and AD2527E Seals (2.33" OD). We have the Bearing Kit for #84 Spindle, L44649/L68149 Bearings # BK2-100. This kit contains 1 each Bearing L44649 (outer bearing) and L68149 (Inner bearing) and 1 each inner/outer race L44610 and L68111. Plus Double Lip Seal seal 10-19, tang washer...
    view full answer...

  • Replacement Grease Seal for Lippert 5,200 lb Trailer Axle
  • For a 5,200 lb Lippert axle the correct hub seal is the part # GS-2250DL.
    view full answer...

  • Replacement Boat Trailer Hubs for #82655
  • If you are looking for replacement hubs for your boat trailer, we offer lots of great solutions. The Trailer Idler Hub Assembly # AKIHUB-655-6-EZ-K is a great kit that includes everything you need to replace your 82655 hub. The bearings ( # 25580 for the inner bearing, # 15123 for the outer bearing), races, and grease seal included in this kit can also be purchased separately if needed. Check out the video linked below for details on assembly and installation.
    view full answer...

  • Replacement Bearings for 7,000 lb Dexter EZ Lube Axle to Have On Hand for Road Trip
  • Your 2018 Quality Steel 8314D14K has Dexter EZ lube 7K axles. The bearings for that axle are the Replacement Trailer Hub Bearing # 25580 for the inner bearing and # 14125A for the outer bearing. For the grease seal you will want # GS-2250DL. We do have the Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal # BK3-210 to give you what you need if you also want the replacement races for the hubs.
    view full answer...

  • Determining Correct Replacement Hubs For 2003 Ranger Trail R61 Boat Trailer
  • From our experience the Ranger Trail Boat Trailers like your 2003 Ranger Trail R61 use inner bearing # L68149 and outer bearing # L44649 but you will want to confirm this by verifying which inner and outer bearings your trailer uses. You can determine which bearing combination your trailer uses by pulling one of the hubs and looking for the bearing numbers stamped on the face of the inner and outer bearing as shown in the included picture of the # L44649. If your bearings are worn...
    view full answer...

  • Replacement for Dexter Drum 8-283
  • After doing some research it looks like this is an obsolete hub/drum without a direct replacement. The inner bearings it uses are # LM67048 and the race is # LM67010. For the outer bearings it uses # L44649 and the race is # L44610. We do have one possible replacement for you, the Dexter Trailer Hub and Drum for 3,000-lb Axles - 10" Diameter - 5 on 4-1/2 # 008-418-02. The difference between this and the 8-283 will be the seal, right now you have a # 10-42 grease seal with an inner diameter...
    view full answer...

  • Bearing Kit for Trailer that Has 3,500 lb Axles
  • Since you have 3,500 lb axles you'd want a bearing kit for this axle capacity and not a 7k axle as the bearings and seals are totally different. For a 3,500 lb axle you'd want the part # BK2-100 instead. This comes with the correct size seal as well.
    view full answer...

  • What is Next Size Smaller Bearing Buddy than One with 1.98 inch Outer Diameter
  • Bearing Buddy does have a size that is slightly smaller than the 1.98 inch one you already tried with the # BB1968 or stainless steel # BB1968SS. It's .012 of an inch smaller in diameter which sounds like exactly what you are looking for.
    view full answer...

  • Replacement Bearings, Races and Seals for Hub #22834
  • Although the #22834 hub is an older, obsolete trailer hub, we do have the replacement parts you are looking for. From what I have found, this hub uses a # 29031 grease seal. The replacement inner bearing is # 2788 and the outer bearing is # 1779. The races you need are # 2729 and # 1729.
    view full answer...

  • Replacement Bearings and Grease Seal For 7,000 lb Dexter Axle
  • I was able to verify for you the correct replacement bearings for your Dexter 7,000 lb axle, and you were off to a good start with the seal. The only other things you will need are the bearings and races; and also keep in mind that the grease seals are sold as a pair. Since you mentioned your 5th wheel was 41 feet long, I assume you have a tandem axle trailer, so you would need to order one of the following kits for each hub: - Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal # BK3-200 This...
    view full answer...

  • Can Dexter Hub & Drum 8-393-4UC3 be Used as Oil Bath Hub
  • If you prefer an oil bath, you can do so with the Dexter Trailer Hub and Drum Assembly for 7,200-lb Axles Manufactured After 1999 # 8-393-4UC3. What you would need are the Unitized Oil Seal # 10-63 and Oil Cap, Plug and O-Ring for Dexter 7-9K Trailer Axles # RG04-230. Having said that, I recommend sticking with grease as opposed to oil. While oil can be less maintenance, they are both prone to leaks and don't keep water out of hubs as well as a grease cap. The issue with this is that...
    view full answer...

  • Trailer Hub Dust Cap for 1.940 Hub Bore
  • Are you sure you didn't order a cap for a 1.968 hub bore? We don't offer a cap for a 1.986 bore. The next size down would be for a 1.943 bore, part # F001524 which would be the correct fit for a 1.94 bore. Keep in mind, the dust caps are meant to be slightly oversize for a tight fit. You'll need to persuade it in with a hammer and a block of wood. I've linked to a product description video for the # F001524 dust cap.
    view full answer...

  • Bear Aluminum Boat Trailer Replacement Axle and Suspension Parts For 3,500LB Tandem Axle Trailer
  • I reached out to Bear and they were able to confirm that your 3,500lb axles use a #84 spindle. This will allow you to use the Hub Bearing Kit # BK2-100 on each of your axle hubs. The kit includes new inner and outer bearings and races, a grease seal, cotter pin, and tang washer for one hub. The Bearing Buddy Bearing Protectors # BB1980A-SS can be used if your axles do not already have the EZ Lube spindle. They were also able to tell me they use a 4-Leaf Double-Eye Spring # SP-212275....
    view full answer...

  • Replacement Bearings, Races, Grease Seal and Hub For a 2007 EZ Loader Customs Boat Trailer
  • Your hub on your 2007 EZ Loader Custom trailer uses a unique size Grease Seal # 168255TB (inner diameter 1.687"). We do not have any bearing or hub kits that will have all the correct parts for your hub. Here is a list off the parts you would need to build your own bearing kit. Inner Bearing # L68149 Inner Race # L68111 Outer Bearing # L44649 Outer Race # L44610 Grease Seal # 168255TB If you would like to replace the hub that will already have the correct bearing races already...
    view full answer...

  • Bearing Buddy Bearing Protectors for 1.975 Hub Bore Diameter
  • The closest Bearing Buddy Bearing Protectors we have to matching the 1.975" inner hub bore diameter you measured are part # BB1968 for Chrome or # BB1968SS for Stainless Steel (rust resistance). As you mentioned in your question these are designed to fit a 1.968" hub bore, so it doesn't match your dimension exactly but it's close enough to fit and work great (this is a difference of just 0.007"). The hub bore is going to be tapered as well which will further seal this cap in place. I...
    view full answer...

  • 2021 Grand Design Travel Trailer Toy Hauler Axle Components
  • The 4,400lb axles will share some of the same components as the 3,500lb axles. It is a good idea to check your sizes ahead of time to ensure you get the exact product that you need(see article and picture). Here is what we show fitting your 2021 Grand Design Imagine XLS 24MPR Toy Hauler. Inner Bearing # L68149 Inner Race # L68111 Outer Bearing # LM67048 Outer Race # LM67010 Grease Seal # RG06-050 You can still search by your travel trailer just know that since manufacturers don't...
    view full answer...

  • Seals & Bearings For Calkin Boat Trailer
  • Here is a 1.75" Inner bearing # 25580 and here is the 1.25" # 14125A. Here is the seal # GS-2125DL.
    view full answer...

  • Ways To Determine Bearing Sizes Used On a Dexter 3500LB Trailer Axle
  • There are going to be 2 ways to find out what size spindle is on your Dexter 3500lb axles under your car trailer. First every Dexter axle manufactured after April 2001 will have a serial number stamped on the rear of the axle tube near the passenger side, or on a sticker on the center of the axle. With these serial numbers we can contact Dexter to determine exactly what size components are on your axle. Please let me know what those numbers are if you have them. If you have an older...
    view full answer...

  • Replacement Bearings for Dexter Axles with 12000-lbs Capacity
  • The Replacement Trailer Hub Bearing # 3984 has an inner diameter of 2.625", so it's possible that it will work on your 12,000-lbs Dexter axle, but you'll need to know what bearings are in your hubs to confirm this is the correct replacement bearing. This bearing is designed to fit in Dexter hubs with part numbers: 8-216-5, 8-214-8, 8-217-5 and 8-272-5; the only hub we currently have available out of that group is the 8-214-8 with part # Dexter Trailer Idler Hub Assembly for 12,000-lb Axles...
    view full answer...

  • How to Pick Out Replacement Dust Cap for Trailer Hub
  • We definitely can help but we need to know the diameter of the cap so that we can pick out the correct one. You'll need to remove the one you have and measure the outside diameter of the cap where it fits into the hub and we'll be able to pick you out what you need. If you have a 1.99 inch diameter you'd want the part # RG04-040, if you have a 2.45 inch diameter you'd need part # DC250L-DCRP, or if you have 2.72 inch you'd want part # RG04-120. To measure your hub bore you'd need...
    view full answer...

  • Replacement Bearings and Seals for Converting 8K Oil Bath Dexter Axle to Grease
  • I believe I was able to find the bearings and seals that you need, but you'll want to double check on your end by removing the hub and looking at part numbers just to make sure. Inner Bearing - # 25580 Inner Race - # 25520 Outer Bearing - # 02475 Outer Race - # 02420 Grease Seals - # RG06-070 (2.250" ID and 3.376" OD) When it comes to the oil bath caps from what I could find yours should be part # RG04-230 which has an OD of 2.875" and nothing we have is that fits that. Since...
    view full answer...

  • Grease Seal and Bearings Recommendation for 5200 lb Lippert Axle
  • The bearings your Lippert 5,200 lb axle has are part # LM67048 and # 25580 and the grease seal is # RG06-070. For a cotter pin you'd need just the # 165649.
    view full answer...

  • Replacement Dust Cap for Hub with 2.312 Inch Opening
  • I have a solution for you, but it's unlikely that you're going to be able to use the # RG04-080 because of the difference in size. If you don't have EZ lube axles, you could use the Fulton Grease Cap # F001601 which has a diameter of 2.33" and would be a much closer fit for your trailer-in fact, if you look through some of the reviews there are some Ranger boat owners who've said this was a match for their trailer. This is a zinc plated steel grease cap that will provide good corrosion...
    view full answer...

  • Replacement Hub For 2007 Marine Master Trailer With UFP 2,000 Lb Axle
  • Your axle is a UFP axle which is made by Dexter Axle. I contacted them with your serial number and they were able to tell me your axle is a 2,000 lb axle with a 76" hub face to hub face and 62" spring center to spring center. The bearings are inner and outer part # L44649. Dexter said your original hub is a 2,500 lb idler hub. You can replace your idler hub assembly with Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 part # TA88545-2 that uses the inner/outer bearings part...
    view full answer...

  • Grease Seal 4,400 lb Axel 2018 Grand Design 2670MK Imagine
  • Yes, the item listed for 3,500-lb axle, # RG06-050, should be what you are looking for. This should cover axels from 3,500 to 5,000 lb. as long as it has 12" hub, Double Lip - ID 1.719" / OD 2.565". I have attached a few links for tool suggestions if you are in need of something to assist with this task, bearing packer, Seal puller, etc.
    view full answer...

  • Correct Inner and Outer Bearing for EZ Loader Trailer with L44649 Outer Bearing and 168255TC Seal
  • I do have an option for you but you will need to convert from oil to grease since they don't make stuff for oil in this size anymore. That said, I can confirm based on the info you provided that you need to use part # L44649 for the outer bearing and part # L68149 the inner bearing, not two of the part # L44649 inner/outer bearings. Then for the grease seal you will want to use the part # 168255TB. In order to switch from oil to grease you'll also need the part # e99005 which is for a 1.98"...
    view full answer...

  • Grease Seal for Grand Design 5th Wheel with 7k Axles
  • For a Dexter 7k axle the correct grease seal is the part # GS-2250DL. Or for a kit that has the correct bearings and seal you'd want the part # BK3-200.
    view full answer...

  • Bearing Kit with Caps, Castle Nuts, and Lug Nuts for Hub with L68149 and L44649 Bearings
  • For a kit that includes the bearings, races, and seal you'd want the part # BK2-100 for each hub. Then for caps you'd want the part # DC200L-DCRP. For a castle nut # 165686 and for lug nuts # AM90070.
    view full answer...

  • Replacement Center Plug For Kodiak Oil Bath Caps
  • Mark, it sounds like you misplaced the rubber center plug for the oil cap part # K1014PCAP from your Kodiak 10,000-lb Disc Brake Kit part # K2HR958QD11. I recommend Replacement Center Plug for Kodiak Oil Cap part # KO54FR to replace it.
    view full answer...

  • Which Hubs Can Be Used to Replace the Hubs on a UFP H-1062-3
  • The UFP hub that you've referenced isn't made any longer I don't believe, but we do have some options for you. From some previous customers, we've determined that the UFP H-1062-3 axle has a spindle that has # L44649 inner and outer bearings, and a grease seal that has a 1.979" OD and a 1.372" ID, like part # BB60005. You will need to choose the hub based off those bearings and the bolt pattern of the hub for your wheels, but the most likely one for a boat trailer of any size is a 5...
    view full answer...

  • Replacement Wheel Bearings For Dexter 4400 lb Hubs
  • The 4400 lb axle has spindles that are compatible with the # L68149 inner and # LM67048 outer bearing, the # LM67010 inner and # L44610 outer race and a 10-19 grease seal like part # RG06-050. We don't offer this as a kit, but the parts are available separately. We also offer the replacement hub/drum as part # 8-407-5UC3-EZ. If the armature surface of the drum where the brake magnet rides on your existing drum is grooved or pitted, you'll also want to replace the drums. The drums include...
    view full answer...

  • Bearing Kit for Trailer Hub that Has Seal 10-54 and Bearings 25580 and LM67048
  • The 10-54 Dexter seal is the same as the # GS-2250DL which has an inner diameter of 2.25 inch. Now if you were looking for a bearing kit that matches the bearings you have of 25580 and LM67048 the part # BK3-300 comes with everything.
    view full answer...

  • Recommended Brakes, Bearings and Seals for Dexter 10k General Duty Axle
  • I reached out to Dexter and found that your axle is a 10,000 lb general duty axle. The correct inner bearing and race is the # 387A and # 382A, the correct outer bearing and race is the # 25580 and # 25520. For a replacement seal you want the # 10-51. For electric brakes I recommend the Dexter Electric Trailer Brake Kit - Self-Adjusting - 12-1/4" - Left/Right Hand Assemblies - 10K # 23-438-439. These are self-adjusting brakes so there will be no need for manual adjustment. I have...
    view full answer...

  • Correct Replacement Bearings For 2009 Jayco Jay Feather Ex-Port 17C
  • I would be happy to help! Based on the information shown in the picture you provided your 2009 Jayco Jay Feather Ex-Port 17C will need bearing kit # BK2-100. This includes outer bearing # L68149, outer race # L68111, inner bearing # L44649, inner race # L44610, grease seal 10-19, and a new cotter pin. If you determine you do need replacement brakes I recommend the # AKEBRK-35. These will be an exact replacement for your trailer. If your brake mounting hardware is in good shape it...
    view full answer...

  • Wheel Seal With 1.63 ID and 2.375 OD
  • Based on the measurements you gave me it sounds like Grease Seal # 168233 that you referenced is the one you need. It's a double lip grease seal that has an Inner diameter of 1.688" and an Outer diameter of 2.332". The # 010-180-00 seal is another seal with an inner diameter of 1.68" and an outer diameter of 2.33" and also is a double lip seal. I know they are not the exact measurements you gave, but that is the closest size seal that we carry. That's also why it's important to measure...
    view full answer...

  • Which Bearing Buddy Will Fit a 2 5/8 Hub Bore
  • The hub bore of 2 5/8, or 2.625, is kind of an odd size. It puts you in between the Bearing Buddy # BB2562SS, which fits a 2.562 inch hub bore, and the Bearing Buddy # BB2717SS, which fits a 2.717 inch hub bore. That being said. the # BB2562SS is not a common size and is used mostly for agricultural applications. The # BB2717SS is going to be your best bet, but may require a little sanding of either the part of the hub to get everything seated properly.
    view full answer...

  • Replacement Grease Seals and Wheel Bearings For Dexter D52 Axle With 8-201 Brake Drums
  • Per Dexter your axle will need the Grease Seals # RG06-070. We also have the Bearing Kit # BK3-300 that will provide you with new wheel bearings, races, a grease seal and cotter pin. I recommend having one or 2 of the bearing kits with the trailer in the event a wheel bearing is damaged while you are on the road. The Seal Puller # PTW1219 and 7-Piece Installation Set # PTW83020 will make replacing the parts easier.
    view full answer...

  • Replacement Hubs for 2,000 lb Dexter Torflex Axle
  • Thanks for the info, and since you know you have a 2,000 lb #9 Dexter Torflex axle, we can get you the right replacement hub because we know those use inner and outer bearings # L44649. So the correct replacement hub for your application is the Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2" Bolt Pattern # 8-259-5UC1. That is for standard spindles, so if you have the EZ-Lube spindle, what you will need is the Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube...
    view full answer...

  • Bearing Kit for a BT8 Spindle
  • A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the grease seal would ride. A BTR spindle would have dimensions of 1.06 inch for outer and inner bearing plus 1.50 inch where the grease seal would install. You can confirm your spindle size by using a digital caliper like item # PTW80157. If you pulled off a bearing or bearings that are stamped L44643 then you will need the Bearing Kit for 1" BT8 Spindle,...
    view full answer...

  • Looking For Replacement Seals For An Old Utility Trailer That Has 7205E Bearings
  • The 7205E number that you found will actually mean you have a 30205 bearing. I have run into this bearing before and, unfortunately, we do not have parts that will match it. This is due to it being an extremely uncommon size, which then makes the spindle uncommon as well. This means the closest seal we will have will be the TruRyde Double Lip Grease Seal # 34823, but it will measure a bit differently at 1.249" for the inner diameter and 1.983" for the outer diameter. You may be able to...
    view full answer...

  • Looking for 1.508 ID Oil Seal for Spartan Boat Trailer
  • I looked through the grease and oil seals we offer, and I'm sorry to say we don't have anything remotely close. Sleeving the spindle surface where the seal rides would be a possible solution if you have, or you know someone with the machining expertise, but you'd want to tack the sleeve in place so it doesn't rotate on the spindle. Because the seal we offer with the correct OD is a grease seal, you'd want to pack the bearings with grease instead of filling the hub with oil. The #...
    view full answer...

  • Replacement Bearings For A Dexter 2200 Pound P12 SLR Axle SN: D5860714
  • When it comes to replacing bearings on your Dexter 2200 pound P12 SLR axle SN: D5860714 per Dexter the inner and outer bearing number is # LM67048. Then you would need The Race # LM67010, and The Grease Seal # GS-2125DL We do not sell a kit with all the pieces together. I attached a review video link below.
    view full answer...

  • Difference Between Bearing Buddy BB1980T-SS and BB1980A-SS
  • They are not the same. The Bearing Buddy # BB1980T-SS are threaded into place, and not driven in. If your hub bore is threaded, that's the model you'd need. If your hub bore is NOT threaded, you'd use part # BB1980A-SS. The difference between the # BB1980A-SS and your older BB1980SS is the # BB1980A-SS has the auto check feature that allows you to easily see at a glance whether the hub needs grease added, while the older model didn't have that feature.
    view full answer...

  • Tongue Washer Compatibility with Trailer Spindle and Tapered Bearings
  • The Tang Replacement Spindle Washer # 5-71 or the Washer Spindle Tongue # 165863 will fit into the groove of your spindle to keep the washer and nut from rotating. This gives you a similar outcome to the tang style washer that uses the cotter pin to hold it, but the idea is the stabilization of that washer that will keep slight pressure on the flat side of the tapered bearing to hold it in place. This is one style similar to a D style washer as well like Spindle Nut Kit for EZ Lube Axles...
    view full answer...

  • Looking for 1.94 Inch Grease Cap and 35898 Grease Seal
  • As far as a grease cap goes, I've found one that would work for you. The Fulton # F001524 has an OD of 1.943, which would make for a good compression fit in your hub bore. As far as the seals go, I didn't have much luck. I've looked through the grease seals we offer, and I'm not seeing anything that comes close to the dimensions you provided, I'm sorry to say. I even did a Google search of the 35898 reference number, and came up empty handed. There have been occasions where we've...
    view full answer...

  • Availability of Bearing Kit for Lippert 5,200 lb Axle with 2.125 inch and 2.25 inch Grease Seal
  • For whatever reason Lippert and Dexter made their 5,200 lb axles with a grease seal diameter of both 2.125 inch and 2.25 inch. There isn't a whole lot of rhyme or reason as to why or when they picked either so it comes down to having to check although I will say that it seems like the 2.125 inch diameter is a little more common. For a 5,200 lb axle bearing kit with the 2.125 inch grease seal you'd want the part # BK3-310 or for 2.25 inch you'd want the # BK3-300.
    view full answer...

  • Bearing, Race and Grease Seal Kit for 3500 lb Axle
  • We sure do. You'll need the # BK2-100 which provides an L44649 and L68149 bearing assembly, a L44610 and an L68111 race and a 10-19 grease seal (same as the GS-1917 you mentioned). The tang washer and cotter pin are also included. Each kit provides part for one hub. For a tandem axle trailer, you'll need 4 kits. The Bearing Buddy bearing protectors are sold in pairs as part # BB24SR. For a tandem axle trailer, you'll need two pairs.
    view full answer...

  • Replacement Trailer Bearing for L44640
  • I may have a solution for you, but I'm not aware of a bearing that has the L44640 number. However, the Replacement Trailer Hub Bearing - L44649 # L44649 is a fairly common bearing found in trailer hubs and has an inner diameter of 1.063". If you can measure the inner diameter of your bearing and it has the same measurement, then the # L44649 would work for you. You'll want to measure with a digital calipers like the 4" Carbon Fiber Digital Caliper # PTW80157 to get the most accurate measurement....
    view full answer...

  • Replacement Bearing Cover Options for Bri-Mar Dump Trailer
  • You will need one of two sizes depending on the axle capacity of your Bri-Mar dump trailer. If you have 7,000 lbs or 8,000 lbs axles, then you will need part # 21-43-1 and # DC-RP if you have EZ Lube spindles (grease zerk on the end) or you can use part # RG04-100 if you have standard spindles. If you have 5,200 lbs or 6,000 lbs axles, then you will want part # RG04-080 if you have EZ Lube spindles or part # RG04-060 if you have standard spindles.
    view full answer...

  • How To Convert Oil Bath Hubs on 3700 Lb Axle Over to Grease
  • Converting an oil bath hub to grease couldn't be simpler. Just drain the oil, clean and inspect the bearings and races and pack the bearings with a good quality grease like the LMX # L11390. The # 168255TB seal you mentioned is typically used by 3700 lb marine hubs which use a # L68149 and # L44649 bearing and a # L68110 and # L44610 race. We offer the replacement races, seals and bearings if you need them.
    view full answer...

  • Trailer Hub and Bearings for 2017 Winnebago Micro Mini 1700BH
  • Your 2017 Winnebago Micro Minnie 1700BH has a 3,500 lb axle, so for just the bearing kit you will need the Bearing Kit # BK2-100. For a replacement hub and drum the correct part is the Dexter Trailer Hub and Drum Assembly # 84546UC3. Then for grease I recommend the LubriMatic Disc/Drum Brake and Wheel Bearing Grease # L11380. And for a bearing packer I recommend the Bearing Packer # PTW1218 or # ALL647646.
    view full answer...

  • Bearing Kit for 2017 Ranger Trailer with Bearings L44649
  • Based on the info you listed sounds like you would want the bearing kit part # BK1-150 which comes with the bearings, races, and seal for the hub you have.
    view full answer...

  • Replacement Wheel Bearing Kit for 2012 Coleman Trailer with 2 3500k Lippert Axles
  • The correct bearing kit you need for your 3500k Lippert axles is the # BK2-100. This kit uses a # L68149 inner bearing and a # L44649 outer bearing. It also comes with grease seal # 58846 and races. I went ahead and attached a demo video that shows you the parts involved.
    view full answer...

  • Which Bearing Buddy Fits Lippert 3,500 lb Trailer Axle
  • Based on your seal dimensions you have a 3,500 lb Lippert axle hub so for a Bearing Buddy you'd want the part # BB1980A-SS.
    view full answer...

  • Bearing Buddy Bearing Protectors For a 1.96" Hub Inside Diameter
  • We have the Bearing Buddy Bearing Protectors # BB1968SS that fit a hub bore of 1.968 which is likely the size you have. The measurement may be slightly off based on the outside temperature as steel can expand and contract based on temperature.
    view full answer...

  • Replacement Bearing Kit for a 2,200 Pound EZ Lube Axle
  • The etrailer.com Bearing Kit, L44649 Inner/Outer Bearings, 10-60 Seal # BK1-150 will actually be the correct one. The included seal will have an outer diameter of 1.987 inches and an inner diameter of 1.50 inches. This also includes the TruRyde Spindle Washer - Tang Type for E-Z Lube # 5-101 and should get you completely taken care of.
    view full answer...

  • Dexter 8-247-Hub Bearing Buddy and Bearing Kit Fit
  • Yes the Bearing Buddy part # BB1980A-SS is correct for the Dexter hub you have # 8-247-50UC3 and then for the bearing kit part # BK2-100 is also correct! You made my job easy.
    view full answer...

  • How to Determine Which Grease Seals for Hub with 25580 Inner and 15123 Outer Bearings
  • The Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL # GS-2125DL grease seal that comes with the # BK3-110 would typically be a match, and measures 2.125" inner diameter and 3.376" outer diameter. With that said, it's possible that your hub might require a different seal. We do not have information on what hubs your Rockwell 5200-lbs axle has on it, but you can either measure your old seal using a digital caliper like the # PTW80157 or see if there are numbers stamped on...
    view full answer...

  • How to Determine the Correct Hub& Drum and Electric Brakes for 3,500 lb Axle on Trailer
  • To determine the correct electric brakes you first need to determine the correct fit for your hub and drum. For a 3,500 lb axle that will depend on what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. Additionally, you need to know your hub's wheel bolt pattern; if you do not know what it is I have added a help article which...
    view full answer...

  • Replacement EZ Loadr Boat Trailer Bearings
  • Based on your VIN I believe you have a 3,700 lb axle but unfortunately cannot confirm. If you have 10 inch hubs then that would help confirm. For that axle you would use # L44649 bearing and # L68149 bearing along with seal # 010-180-00. The best way to confirm is actually to pull a hub and look at the numbers on the face of the bearings. Based on what I could find the above is the correct fit.
    view full answer...

  • Replacement Bearing/Seals for Hubs With 1 Inch Spindle
  • If the axle has a straight spindle with an L44643 outer bearing, it would use the same L44643 inner bearing. So, we've got the bearings and their compatible L44610 races covered. For the grease seal, you're most likely needing a 34823 seal which has an ID of 1.249 inches and an OD of 1.983 inches which is super-close to the measurements you provided. The seal ID can be tricky to get because it's usually pretty mangled when it's removed. The easiest way to get the seal ID is measure...
    view full answer...

  • Recommended Bearing Buddies to Replace Old 1.981 Inch Bearing Buddies
  • In order to find the correct Bearing Buddies you will want to get the most accurate hub bore measurement you can get. If you can't get the measurement without pulling the hub you will need to pull the hub to make sure. From the measurements and part numbers you provided, along with the old ones you have, it sounds like you need the Bearing Buddy Bearing Protectors - Model 1980T-SS - Threaded - Stainless Steel (Pair) # BB1980T-SS. This matches your current bearings and fits a 1.98" hub...
    view full answer...

  • How to Determine Which Replacement Wheel Bearings Are Needed
  • Check the existing wheel bearings for the reference numbers as shown in the provided photo. If the bearings are damaged and the number can't be read, try pulling the other wheel on the axle and looking there. If you can't make out any of the numbers, measure the diameter of the spindle that the inner and outer bearing rides against. A digital caliper like # PTW80157 is recommended for measuring the spindle diameter. I've linked to some videos showing how to access the wheel bearings in...
    view full answer...