What Do I Need to Install a Brake Controller on My 2013 Ford E-350 Without Factory Connector

Updated 10/04/2021 | Published 10/03/2021

Products Featured in This Question

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(177)

$40.07

Deka Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot

(328)

$4.04

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3470)

$118.67

Question:

My 2013 E350 passenger van did not come with factory 4eay. What do I need to install brake controller and 7 pin connector From scratch There is a female plug stowed behind my pin holder but no other as seen on videos

asked by: John R

Expert Reply:

To add a brake controller to your 2013 Ford E-350 I recommend installing the following:

Curt T-Connector 4-Way - # C56020
Universal Wiring Kit - # ETBC7
Extra Wire - # 10-2-1
Mounting Bracket - # 18136
Primus IQ Brake Controller - # TK90160

The Curt wiring gives you the 4-Way that you need and then the additional 2 wiring kits and mounting bracket provide you with all of the wiring for a 7-Way and adding a brake controller. I really like the Primus IQ because it's one of the more budget-friendly controllers but it's really effective and it's also backed by a limited lifetime warranty so you can be confident in the quality.

I've attached some installation videos that will help you out if you plan on doing the install yourself.