2014 Ford Van Universal Installation Kit for Trailer Brake Controller: Complete Installation Video

The 4-way trailer connector wiring harness I recommend for your 2008 Ford Econoline E-350 Van is the part you reference, part #118551. This custom wiring harness adds a 4-way flat trailer connector at the back of your Ford Van to power your…

To convert your 4-way/5-way to a 7-way and 4-way to install a brake controller will require the #ETBC7 which comes with everything needed to make the conversion as well as wire up the controller. Then for a brake controller the Brake EVN #TK63VR…

In order to be able to plug in a brake controller on your 2011 Ford van it will have to have come with either a factory 4-Way or 7-Way trailer connector. If it did not then the brake controller will have to be hardwired in. On a 2011 Ford E-350 Van…

The Draw-Tite Ultra Frame Trailer Hitch Receiver #41952 measures 32.311 inches from the outside bracket flange to the opposite outside bracket flange. The trailer hitch has an easy, bolt-on installation with no welding required. It has a black powder…

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

The connectors you have found are not confirmed to be for the trailer wiring and we don't have any wiring harness that is a fit for what you described. Because you don't have the factory trailer wiring, I recommend starting with the T-One…

For a 2014 Ford E-250 van that does not have the factory tow package or trailer wiring connector, you will need #118551. It plugs in line with the vehicle tail light wiring. I have included a link to a video to the right showing how the harness…

First, the trailer hitch I recommend for your 2007 E-150 is the Draw-Tite Ultra Frame Trailer Hitch, part #41945. This is a Class V hitch and it has a 2-inch receiver opening. The trailer wiring I recommend is the Hopkins Plug-In Wiring #HM11140495.…

Yes, we have exactly what you need. To convert the 4-way of your Jeep to a 7-way so that it will adapt to your trailer that has a 7-way you have two options. If your trailer doesn't have brakes all you would need is the #37185. This would simply…

Although we may not have an installation video for your exact vehicle, you can follow the attached installation video for when we installed the Rear View Safety Backup Camera System #RVS-770613-NM on a 2011 Ford Van. The installation process…

The Draw-Tite Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2", #DT45518, is for a 2017 Ram 2500 or 3500 but not the Cab and Chassis model. For that you would want the Draw-Tite #41952 for 2500, 3500, and 5500. I contacted Cequent who is…

To get a hitch on your 2002 International T444E School Bus, you will need to double check the width of the frame and how far the body extends down from the frame. Something like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On…