Replacement Electric 10" Brake Shoes For a 2000 Scamp 19' Everlands
Updated 11/12/2021 | Published 09/23/2021
Products Featured in This Question
Question:
I did NOT see Scamp as a trailer manufacturer choice on your web-site when looking for electric brake parts. I am looking for electric brake parts shoes, magnets, hopefully NOT drums/hubs for a 2000 Scamp Everlands 19 foot 5th wheel camping trailer, converted to regular 2 inch ball hitch see photo. The entire trailer is one axle and weighs 2,200 lbs. Trailer VIN: 1S7R5W107YXXXXXXX. When I plug the trailer into the round 7 pin electric connector, my Tekonsha Prodigy P3 Trailer Brake Controller says, NO Trailer Connected. However, all the trailer lights work fine when connected, just no brake action on trailer. P3 troubleshoot function shows 12.6V Power, and goes from 0V to 12.5 V when brakes applied, but with only 0.01A current. I assume an open circuit somewhere in brake circuit and/or magnets worn away to nothing. Any help appreciated, THANKS!!
asked by: JG B
Helpful Expert Reply:
I reached out to Scamp for help to find your exact brakes, unfortunately due to the age of your 2000 Scamp 19 Everglades they did not have the exact information or parts available and the only thing that they could tell me is your trailer uses 10" brakes.
I recommend pulling apart one of your hubs first to check that the Replacement Shoe and Lining Kit # AKBRKR-S-10 and Magnet Kit # AKBRKR-M10 are the correct. This will also be a good time to also inspect your bearings, drums, grease seals, etc since the trailer is 22 years old to determine if there are other parts that need replaced or if anything was changed from original.
Product Page this Question was Asked From
Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- RH
- 3500 lbs
- Brake Shoes
- 10 Inch
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: brake shoes
- Video: Replacement Brake Shoes for Dexter 10" Nev-R-Adjust Electric Brake Review
- Video: etrailer Trailer Brakes AKBRKR-S-10 Review
- Shop: Replacement Brake Shoes for Dexter 10" Nev-R-Adjust Electric Brake - Left Hand - 3,500 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly - 3,500 lbs
- Q&A: Will Overheating a Trailer Hub Damage the Spindle
- Q&A: Replacement for Al-Ko B850-3 Trailer Axle Needed
- Q&A: How to Initially Adjust the Dexter Nev-R-Adjust Electric Trailer Brakes
- Q&A: What Are Mounting Puck Dimensions of Demco Hijacker UMS Series Gooseneck Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Need Fridge Similar To Everchill RV Refrigerator WAY44FR But Different Brand
- Q&A: Replacement Bearing Kit for a Lippert 122093 Hub
- Q&A: Replacement Electric Brakes For A 2023 Brinkley Z 3100 5th Wheel With 7k Axles
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Double-Eye Trailer Suspension System Review
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: How to Tell the Weight Rating of a Trailer Axle
Jg B.
11/12/2021
As a follow-up to my original question above, I got the following out of the original 2000 Scamp Owner's Manual: 3500 pound Dexter Axle P 16, Model SLR, with standard 10" electric brakes, Dexter part number: Left hand 23-26, Right hand 23-27, Spindle: TTH # 84 Spindle, Inner Bearing: L68149, Outer Bearing: L44649, Grease Seal: 58846 (2.565" OD, 1.719 ID), Inner Race: L68111, Outer Race: L44610. 1/2 inch studs in 5 bolt pattern with 4.5 inch bolt circle. Better info, better guidance...????