Can the Under-Panel on a 2013 Honda CR-V be Left Off After Installing a Hitch?

Question

Question:

I am planning remove the plastic cover and not reinstall it will there be a problem with that? thanks

asked by: Robert M

0

Expert Reply:

As the plastic cover that needs the trimming is just there to cover the fuel tank on your 2013 CR-V, you can definitely leave it off. From the install video I included, you can see that nothing really ties directly into this panel.

expert reply by: Lazer S

0

Answer 1

The best solution we have would be to install an e-bike rack like the Hollywood Racks RV Rider part #HLY64FR in a 2 inch hitch installed on the 2014 Honda CR-V like the #e98868. It would be really difficult to come up with a hitch extender solution…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hi Deb! There are quite a few hitches available for your 2025 Honda CR-V Hybrid and I have the 2" receiver options (best size for what you are wanting) listed below with their corresponding weights. Curt Trailer Hitch Receiver - Custom Fit -…

view full answer...

Answer 6

Hey Napoleon! The perfect hitch for your 2026 Honda CR-V Hybrid Sport is the etrailer #e98848. This is a Class III hitch with a bolt-on installation and a limited lifetime warranty. It also features a matte black finish which blends well with OEM…

view full answer...

Answer 7

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 8

The available trailer hitches for your 2019 Honda CR-V can be pretty easily categorized into hidden and non-hidden groups. I highly recommend going with a hidden-crosstube hitch, especially on a new vehicle like yours, as this is going to create a…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

Hey Frank! This is a newer product, so there aren't many long-term owner reviews available yet. That said, we have done extensive testing on the Benton MoveHitch #B86VR. A strain gauge was used to measure the forces the carrier experiences during…

view full answer...

Answer 11

Hey Erica, thanks for reaching out! Since your 2026 Honda CR-V is a Hybrid we're a bit limited on the hitch options, and you'll need to get one that does require some fascia cutting. For this, I recommend the etrailer Trailer Hitch Receiver…

view full answer...

Answer 12

Hi Daniel; if you have the flush rails on your 2025 Honda CR-V you need the Fit Kit for Thule Evo Flush Rail and Edge Flush Rail Roof Rack Feet #TH52KE. If you don't have any rails, you need the Fit Kit for Thule Evo Clamp and Edge Clamp Roof…

view full answer...

Can the Under-Panel on a 2013 Honda CR-V be Left Off After Installing a Hitch?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching