Flat Towing Base Plate Kit for 2021 Chevy Blazer with 3.6L Engine

Updated 07/21/2021 | Published 07/20/2021

Products Featured in This Question

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3186)

$179.96

16 Gauge, 4 Conductor Bonded Parallel Wire - Per Foot

(237)

$2.82

Roadmaster Direct-Connect Base Plate Kit - Removable Arms

(3325)

$575.00

RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs

(656)

$70.95

Roadmaster Hy-Power Diodes (Qty 4)

(336)

$62.71

Roadmaster Bent Electrical Socket Bracket

(174)

$22.36

RoadMaster 6-Wire Trailer Connector - Vehicle End

(359)

$24.10

Question:

Bonjour , jai changer mon véhicule saturn pour un chevrolet blazer 2021 awd moteur 3.6 .Je veux me servir de mes attache a verrous tournant que javais sur le saturn , dite moi si le modele RM-523204-5 peux faire . Pour le fillage jai seulement besoin dune connection a 6 fils femelle ainsi que le fillage pour lauto car je réutilise mes anciennes pieces entre lauto et le motorisé . Jai besoin de conseils ainsi que des numéros de pieces a commander . Merci (Hello, I have changed my saturn vehicle for a chevrolet blazer 2021 awd engine 3.6. I want to use my twistlock couplers that I had on the saturn, tell me if the model RM-523204-5 can do. For the wiring I only need a 6-wire female connection as well as the wiring for the car because I reuse my old parts between the car and the motorhome. I need advice as well as part numbers to order. Thank you)

asked by: Jean L

Expert Reply:

By twist lock couplers, I'm assuming you're speaking of a flat towing base plate kit. A Saturn vehicle and a Chevy Blazer would use a different base plate kit, so you'll need to get a new kit. As long as your Blazer doesn't have the skid plate, the Roadamaster # RM-523204-5 kit will work great for you.

As far as a wiring goes, you can piece together a kit using the # RM-794 diodes, a length of # 16-4B-1 wire long enough to reach the vehicle taillights from the front bumper, a # RM-910030-7 6 pin connector and a
# RM-910030-5 bracket for the connector.

If you don't already have them, you'll also need a tow bar like the Roadmaster # RM-522 Falcon All-Terrain tow bar, a safety cable kit like # RM-643.

You might also need a high/low adapter if the 13.5 inch installed height of the base plates has a height difference of more than 3 inches plus or minus compared to the receiver height on the motorhome. I'll link to our selection of adapters as well as to a help article that explains how to measure to determine the height difference.