Could LED Anti-Flicker Harness for ARC H13 LED Bulbs ARC58FR Work with Most H13 Bulbs

Question

Question:

will this most likely stop other brands from flickering and turning off as well

asked by: David

0

Expert Reply:

If the vehicle normally used an H13 headlight bulb and you were converting that bulb style to LED the Anti-Flicker Harness for ARC H13 LED Bulbs # ARC58FR would allow them to function properly.

expert reply by: Jameson C

0

Answer 1

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 2

Hey Randy thanks for the information! Here are the parts you'll need to add a brake controller to your 2006 Dodge Ram 1500 with a factory 4-Way connector: Brake Controller and Custom Fit Wiring Harness - Curt TriFlex NEXT item #C43GV 7-Way…

view full answer...

Answer 3

Hey Ronnie! You want the upgraded equalizer to match the existing equalizer measurements so you don't throw off the suspension geometry. The Road Armor #LC53CK is only 6" long making it is a little too short for your setup. The MORryde Shock…

view full answer...

Answer 4

You sure do Greg! Which is why the MORryde X-Factor Crossmember for Standard Frame Hangers item #MR33WR comes with longer suspension bolts. These bolts will replace the ones currently being used on your trailer's spring hangers. The X-Factor…

view full answer...

Answer 5

Hey David, we have everything we need to flat tow your 2006 Dodge Ram 1500 4WD but the first thing you need is a base plate kit like the Blue Ox part #BX1988 which I like because in my experience the Blue Ox kits are just really well made and easier…

view full answer...

Answer 6

If your 2006 Dodge Ram 2500 already has the B&W Underbed Kit #BWGNRK1308-5W installed, then the B&W Companion #BWRVK3400-5W is definitely the best option for towing a fifth-wheel trailer. The Companions are considered by many to be the best…

view full answer...

Answer 7

Hey Kyle! What kind of camper do you have? There are camper tie-downs available for your 2006 Dodge Ram 3500 Dually. However, I will need to know what kind of hitch you have, along with running boards (none, cab length, wheel to wheel) to find the…

view full answer...

Answer 8

On the 2006 Dodge Ram 1500 that came with either a factory 4-Way or 7-Way trailer connector the receptacle to plug in a brake controller with a harness such as #3020-P will either be on top of or along the side of a white rectangular box back along…

view full answer...

Answer 9

Hey John! With the CRE3000 on your Reflection you need the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR. The same crossmember will be used on all three sets of hangers. The one thing I would do is take a look under your trailer to…

view full answer...

Answer 10

Unfortunately Jensen keeps discontinuing their stereos so at this time I don't have a good replacement for the VM9726BT. The only stereos we currently have wouldn't be touchscreen or have the compatibility with a camera system if you have one…

view full answer...

Answer 11

I recommend using the Curt Trailer Hitch Receiver #C15809 for your 2006 Dodge Ram 3500. This is a Class V trailer hitch with a 2-1/2" receiver. It has a Gross Towing Weight (GTW) rating of 20,000 lbs and a Tongue Weight (TW) rating of 2,700 lbs.…

view full answer...

Answer 12

Your problem is in the wiring in one of two places. It is either on the vehicle wiring harness or somewhere in the wiring on the trailer. The first thing to do would be to narrow it down to one of these two places, then we can pin-point the problem…

view full answer...

Could LED Anti-Flicker Harness for ARC H13 LED Bulbs ARC58FR Work with Most H13 Bulbs

Product Page this Question was Asked From

Continue Researching