What is the Frame Width of 2008 Ford Super Duty Truck

Question

Question:

So i understand clearly as several people have stated that the 2008 Ford cab and chassis outside to outside frame width is 34” but what is the frame width of the super duty pickup truck? Thanks

asked by: Chris

0

Expert Reply:

According to my research, the frame width of the 2008 Ford F250 and F350 trucks is 37-1/2 inches, so it's definitely wider than the frame used in the chassis/cab models.

The Curt # C15410 Class V hitch you'd looked at is a fit for the 2008 Ford F250 and F350 Super Duty pickup.

I've linked to an installation video.

expert reply by: Mike L

0

Answer 1

From what I could find out, the Draw-Tite #41004 will sit below the frame rails and not inside them at all. So as long as your spare tire sits in between said frame rails, there will be absolutely no issue at all. I did include a picture of this…

view full answer...

Answer 2

34 inch frame widths are pretty common cab and chassis trucks. The B and W Hitch part #BWHDRH25122 that you referenced is designed to fit cab and chassis trucks with a 34 inch width measured from outside to outside on trailer frames. If you measured…

view full answer...

Answer 3

Hello Sean, Thanks for writing in. For a replacement hardware kit you will want to order the Replacement Hardware Kit for Trailer Hitches #RHK. Above "ADD TO CART" you will need to put "Curt C15410" so the warehouse knows what…

view full answer...

Answer 4

The Curt #C14048 measures 16-1/16 inches from the back to the center of the 3 front holes. Those front holes are all 1-1/2 inches on center so you technically could use the 14.565 inch measurement. There is not one that is closer to 15 inches in…

view full answer...

Answer 5

Hey Jerod, The Curt #C15810 is going to be a great fit for your 2001 Ford F-350. The only issue that comes up with the spare not being able to store under the vehicle is if it is larger than 20". Anything larger cannot be stored, but for your…

view full answer...

Answer 6

There are two sizes of hitches you can install on your 2011 Ford F-250 Super Duty Diesel. There is a 2-inch receiver hitch and a 2-1/2 inch receiver hitch. The towing capacity on a 2011 Ford F-250 Super Duty Diesel will range from 12,500 lbs to…

view full answer...

Answer 7

To answer the last question first you could attach some quick links to the safety chain loops on Curt trailer hitch #C15410 so that they are compatible with smaller hooks. We have different size quick links and S-hooks depending on your needs and I…

view full answer...

Answer 8

Hey Wade, welcome back! Yes, you can use SumoSprings along with the Roadmaster Comfort Ride on your 2018 Keystone Alpine 3700FL. Since you have 7k Dexter axles, the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks #RM-2460-2570 is the…

view full answer...

Answer 9

Hey Tim! The distance from the most rear hole to the end of the #BWHDRH25122 receiver tube is going to be 12". See the attached photo.

view full answer...

Answer 10

The width of your frame indicates that your 2012 Ford F-450 is most likely a cab and chassis model which has the frame width a few inches than a standard truck bed. But if you can measure the distance between the mounting holes on the frame of your…

view full answer...

Answer 11

The drop of the Curt Class V #C15810, which is the distance from the top of the hitch crossbar to the underside of the vehicle frame where the hitch mounting flanges attach to the vehicle is 5.63 inches. The distance from the face of the receiver to…

view full answer...

Answer 12

I reached out to my contact at Curt and was able to get a dimension sheet for the Curt Trailer Hitch Receiver - Class V #C15810 referenced in your question. I have attached an image of it for your review. This trailer hitch is designed to fit select…

view full answer...

What is the Frame Width of 2008 Ford Super Duty Truck

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching