See what our Experts say about this CURT Heavy Duty Receiver Hitch

• Trailer Hitch Receiver Options For A 2024 Volvo S60 Plug-In Hybrid
  Hey Paul, There most likely is something in the way that prevents the installation of a trailer hitch on the S models and manufacturers haven't found a workaround yet. That pretty much leaves you with only weld-on adjustable-fit trailer hitches, which would require a bit of DIY to fit. You'll need to measure down from the frame rails to the see how large of the drop you'll need for the receiver tube to stick out from the rear fascia. We offer the following drop sizes: Draw-Tite 7" Drop...
  view full answer...
• What Hitch do You Recommend for My 2012 GMC Savana Utility Van?
  Is the steel step bumper you have installed the factory bumper on your 2012 GMC Savana KUV Van?
  view full answer...
  
• Recommended Class IV Hitch for a 1983 Ford Van
  Hey Greg! We have some universal hitches like the Curt item # C47CR that can be made to accommodate 38" wide frames but no I do not have a way of finding a class IV or V hitch with 38" mounting bolts. The hitches are organized by what vehicle they fit. They're not sorted by size. I saw you were looking at hitches for a 1983 Ford van. We do have a custom fit class IV hitch that has 38-1/4" and 38-3/4" mounting holes. It is the Curt item # 14053. I have linked a diagram below so you can...
  view full answer...
• Trailer Hitch Receiver Options For A 2025 Ford E-350 Cutaway Van
  Hey Jim, I drew up a little diagram of the Blue Ox Trailer Hitch Receiver # BLU75UR's dimensions so you can see if this would be a fit. It's not listed as a fit for your E-series cutaway chassis but the F and E-series can some times be interchangeable. It is listed to fit the following models: 2017 - 2025 Ford F-250 Super Duty 2017 - 2025 Ford F-350 Super Duty 2017 - 2025 Ford F-450 Super Duty Pickup There isn't a custom-fit option confirmed to fit so if this doesn't your next option...
  view full answer...
• Front Mounted Trailer Hitch Receiver Options For A 2019 Nissan Titan Pro 4x
  Hi Kevin, There unfortunately isn't a custom-fit front trailer hitch receiver for your 2019 Nissan Titan Pro 4x so you'd have to go with a universal-fit weld-on trailer hitch like I have listed below. These will all come with a specific drop so you'll want to measure from the frame down to see what size drop you'll need in order to clear the front fascia. These will fit an 18" to 44" wide frame width and any excess can just be trimmed off of the crosstube. Draw-Tite 7" Drop # 41990-07 16"...
  view full answer...
• Recommended Hitch for a 2024 Mercedes-Benz Sprinter 4500
  Hey Pat. The Draw-Tite Hitch item # 75549 does not fit the 2024 Mercedes-Benz Sprinter 4500 and we do not have a custom fit hitch that does. It fits the 2016 - 2025 Sprinter 2500 and 3500 vans with a 144" and 170" wheelbase and the standard bumper. I don't know how or if you can make the item # 75549 hitch fit a model with a 30-3/8" frame. My only solution is to recommend a universal hitch like the Curt item # C47CR. This fits frames from 18-44" and has a 2" receiver. It is a weld-on hitch...
  view full answer...
• Is There A Front-Mounted Trailer Hitch Receiver For A 2021 Ford Ranger
  Hey Charles, There are no custom-fit front-mounted trailer hitch receivers available for a 2021 Ford Ranger but you can still go with a weld-on adjustable-fit hitch. You'll just need to measure the distance from the frame down to the space between the grill and bumper. We offer the follow drop sizes: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR
  view full answer...
• Recommended Hitch for a 2010 Chevy Express 3500 Cutaway w/ a JC Supreme
  Hey Justin. You'll most likely have to do a universal hitch like the Curt item # C47CR with 9" brackets. The brackets will be welded to your frame and allow you to install a 2" hitch. How far does the existing hitch sit below the top of your Cutaway vans frame? You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.
  view full answer...
• Recommended Hitch and Trailer Wiring for a 2008 Freightliner M2 RV
  Welcome back Vic! To add a hitch and wiring harness to your 2008 Freightliner M2 RV, I recommend the Curt Hitch item # C47CR, the 4-Way Upgraded Heavy Duty ModuLite item # # C59496, and the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The Curt item # C47CR universal hitch includes brackets that weld directly to your M2's frame. The 2" receiver has a 16,000 lbs towing capacity and a maximum tongue weight of 1,600 lbs. It works with frames up to 44" wide so it'll...
  view full answer...
• Receiver Hitch for 2019 Kia Niro PHEV
  Hey Kim! No, the Curt Trailer Hitch Receiver # C12171 will not fit your 2019 Kia Niro PHEV. This model is only confirmed to fit the standard gas/hybrid Niro, but not the PHEV. Unfortunately, there is not a custom fit trailer hitch for your PHEV Niro, so in order to tow or haul with your Niro, you will need to measure for a universal hitch on your vehicle, and then have it welded on. Your best option would be a universal weld-on hitch. You'll need to measure the width of the frame on...
  view full answer...
• Recommended Trailer Hitch For A Foreign Model 2020 Ford Ranger FX4
  Hi Drew, The Curt # C97JR you were looking at is designed to fit select model Jeep Grand Cherokee L's and would not be a fit for your 2020 Ford Ranger. All of the custom-fit hitches we currently offer are designed for US models so you'd have to go with an adjustable-fit weld-on trailer hitch instead. These will come with a drop so you'll want to measure from the frame down to make sure the receiver tube will clear the bumper. Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3"...
  view full answer...
• Front-Mounted Trailer Hitch Options For A 2006 Ram 1500
  Hi Brad, Yes, the Draw-Tite # 65033 sits much lower to clear the air dam, while the Curt Front Mount Trailer Hitch Receiver # 31320 sits higher, requiring you to trim the air dam. These both have a 5,000lb capacity so you should definitely make sure your trailer is under that. If it isn't then you should go with an adjustable-fit weld-on hitch instead to ensure you have the capacity to handle the trailer. You can measure the frame width and measure down to where you have space for the...
  view full answer...
  
• Recommended Trailer Hitch for a Ford F-53 Chassis W/ a 34" Wide Frame
  No, Tim. Your buddy's RV was likely built on the F-350-750 cab and chassis which is why it works. With your chassis being the F-53 you'd need to use something else. Without knowing what year your F-53 is I can't say for certain that we don't have any custom fitting hitches, but we do have the Curt Class 5 Universal Weld-on Hitch w/ Brackets # C47CR which is very similar to the Curt Trailer Hitch Receiver # C15445 your buddy has. This hitch is universal, can fit frame widths of 18" to...
  view full answer...
• Can A Hitch Extender Be Used With A Front Mount Trailer Hitch To Park A Travel Trailer
  Hi Don, Hitch extenders place a lot of stress on the hitch because you're leveraging the weight further out so using one typically drops the capacity by 50% when towing. You'd be doing it in a parking lot situation where you wouldn't really be traveling much just more so maneuvering around so realistically that shouldn't affect you but depending on how much weight you're leveraging there could be a breaking point, we just wouldn't be able to know exactly what that point is. The Curt...
  view full answer...
• Best Class 5 Trailer Hitch For 2022 Newmar New Aire 3543 Motorhome
  Hello Ryan, thanks for reaching out. We do offer a class 5 hitch that can be used on your 2022 Newmar New Aire 3543 Motorhome. For that the best option is the Curt # C47CR which is a universal weld-on hitch. It comes with adjustable brackets that can be made to fit virtually any frame up to 44" wide. This hitch has a 2" receiver and a 16K capacity. We also have this hitch with a 2-1/2" receiver and 20K capacity, part # C37CR if you want to go with something a bit beefier. It is recommended...
  view full answer...
• Recommended Trailer Hitch for a 2018 Ford E-450
  David, for your 2018 Ford E-450 I recommend checking out the Curt Class 5 Universal Weld-on Hitch w/ Brackets # C47CR. This trailer hitch will fit on frames that have a width of 18" to 44", has a max weight capacity of 16,000 lbs, and a max tongue weight capacity of 1,600 lbs.
  view full answer...
• Recommended Hitch for a 1995 E-350 Transit Bus w/a 42" Wide Frame
  Hey Jake, thanks for the measurement. The Curt Hitch item # 14053 fits the 1995 Ford E-350's that have bolt holes spaced 38-5/8" from the center to center of your frame. I checked with our vendors and there's no custom fit hitches for your transit bus. In order to add a hitch to it, you will need a universal weld-on hitch. There are three different options, with each of them being Class V hitches with a 2" receiver. They fit frames that are between 18" and 44" wide, so they will fit your...
  view full answer...
• Trailer Hitch Receiver Options For A 2024 Fiat 500e
  Hey Jack, There unfortunately isn't a custom-fit option available for the 2024 Fiat 500e yet so the only other option currently would be to go with an adjustable-fit weld-on trailer hitch. To pick out the right one you'll need to measure down from your frame to find how of a drop you'll need for the receiver tube to clear the rear fascia. We offer the following drop sizes: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2"...
  view full answer...
• Recommended Hitch for a 2005 Fleetwood Revolution LE 40
  Hey Doug we have two different options for replacement hitches for your 2005 Fleetwood Revolution LE 40 motorhome. They each have a 16,000 lbs towing capacity and a 2" receiver. Both are universal hitches that need to be welded on. They fit frames from a minimum of 18" to a maximum of 44" so you'll want to make sure yours is no wider than 44". The difference in the two hitches are the drop brackets that determine where the receiver is placed. There's an 18" option and a 9" option. You'll...
  view full answer...
• Recommended Trailer Hitch for a 2015 Ford E350 Cutaway
  Hey Noel, we don't have any custom trailer hitches for your 2015 Ford E350 but we do have a universal hitch # C47CR that you can use. This hitch will fit frames 18" to 44", has a class V 2"x2" receiver opening, and has a nice 16,000 lb weight capacity. If you have a wider frame than 44" then you can use # 15903 instead which will fit frames up to 60" wide.
  view full answer...
• Availability Of Trailer Hitch For 2024 Ford Expedition
  Hello Corey, thanks for reaching out. I do have a potential solution for you, but there are no custom fit trailer hitches made for the 2024 Ford Expedition. The only way to add a hitch would be to take a universal hitch like the Curt # C47CR to a welder and have them fabricate something to fit.
  view full answer...
• Front-Mounted Trailer Hitch Options For A 2024 Toyota Tacoma
  Hi Barry, There unfortunately isn't a custom-fit front-mounted hitch for a 2024 Toyota Tacoma at this time so you'll have to go with a weld-on adjustable-fit hitch instead. This will require you to measure the distance between the frame rails and the also determine how much of a drop you'll need from the frame rails for the receiver tube to come out from the fascia. We offer the following drop sizes: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865"...
  view full answer...
• What Hitch Will Fit My 2012 GMC Savana 3500 4.8L V8 Built on a Cutaway Chassis?
  Hello Corey, Great question, and I’m glad you reached out. I do want to let you know that the Buyers Products 2" Hitch Receiver For GM Express/Savana with Cutaway Chassis # 3371801102 is designed to fit the 2014 - 2026 GMC Savana Van Cutaway Cab and Chassis. Because your Savana is a 2012, this hitch would not be a match, which explains why the hole pattern did not line up with your frame. At this time, the option we have available for your vehicle is a weld-on style hitch. The Curt Class...
  view full answer...
• Trailer Hitch Options For A 2018 Thor Outlaw 37BG On A Ford F-53 Chassis
  Hey Steve, For a 2017 F-53 chassis we currently only have weld-on universal fit style trailer hitches available. Each of these would fit 18" to 44" wide trailer frames and would come with brackets that can give you a different drop depending on your needs. You'll want to measure down from the frame to determine where you want the receiver tube to come out to avoid hitting the fascia. We offer the following drop sizes: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9"...
  view full answer...

Do you have a question about this Heavy Duty Receiver Hitch?