Setting up the B and W Heavy-Duty Trailer Hitch Receiver on a 1988 Ford F-150, F-250, F-350 Video

I have attached an image of the Draw-Tite Ultra Frame Trailer Hitch Receiver #41947 referenced in your question with a few dimensions labeled. The distance between mounting holes, from the left side mounting bracket to the right side mounting…

For the weight capacity and ease of installation, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver - Class V #41947. This hitch is a confirmed fit for your vehicle. For your wiring harness, I recommend the 4-Pole Hardwire Kit with…

The highest rated hitch we offer for your 1992 Ford F-350 that has been confirmed to fit your frame width would be the Curt Hitch #C15300. This bad boy has capacities of 2,400 lbs tongue weight and 16,000 lbs total trailer weight. However this is a…

The overall length of the side plate that attaches to the frame on the TorkLift SuperHitch Original Trailer Hitch Receiver #TLF1000 referenced in your question is 22-1/2 inches. The trailer hitch has 6 holes on each side (12 total) and each hole is…

I can definitely get you information about bumper styles, but the measurements do vary significantly between brands. With that being said, I included a picture of what a deep drop bumper will look like as well as an article on the different types…

I spoke with my contact at B and W and he informed me that the center section of the B and W Hitch part #BWHDRH25124 measures 31-13/16 inches long measured from outside of flange to outside of flange.

From the top of the mounting plates to the top of the B&W Heavy-Duty Trailer Hitch Receiver #BWHDRH25124 receiver is a 5-1/4" drop and then from the rearmost bolt hole to the end of the receiver is 10-7/8" (see attached).

The hitches you had looked at are fits for various pre-2001 domestic full sized pickups with a 31-1/4 inch center to center frame spread. If the frame on your Spartan chassis matches up, the Curt #C14082 and B&W #BWHDRH25124 would work for you,…

I was able to get the distance between the mounting holes from left to right for the B and W part #BWHDRH25124 and they are right at 34-1/2 inches.

The Curt 3-Piece Trailer Hitch Receiver #C15511 is designed to fit a frame that is 34" or 37-1/2" across on the inside of the rails. I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver #41990-07 as with your frame having been…

So long as your 1997 GMC K2500 has a standard or step bumper, the B&W Heavy-Duty Trailer Hitch Receiver #BWHDRH25124 will indeed fit your 1997 GMC K2500 with a 6-1/2 foot bed. This hitch is designed specifically for the 3/4 and 1 ton trucks due…

According to B&W the side brackets are 6-1/4" tall for their Heavy-Duty Trailer Hitch Receiver #BWHDRH25124.