Result: turn buckles

Great question, Kevin. The Onboard Scale system on your 2024 Ford F-350 Super Duty works by essentially measuring how low the bed is sitting and it gives an estimated weight based off of that. If you added a suspension enhancement then that would…

Hey Patrick thanks for getting in touch. I looked over a few pictures of these 2017 palomino backpack edition campers and all of them look like they stick out past the side rails of the truck far enough to use frame mounted tie downs. Unless your…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

For an RV ladder that has a hinge half way up the ladder we have the Stromberg Carlson #LA-401 which would work well for you. The hinge allows the lower portion to fold like you are wanting so that it can match an angled RV wall like in the picture I…

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

The Brophy Clamp On Camper Tie-Downs #HSAB are a universal fit designed for full-size, non-dually trucks with a few other restrictions but you can still measure to see if they would be a fit for your F-250 based on the dimensions displayed below. We…

I was able to locate a wiring guide for jack motor switches such as your Atwood part and from these I linked a diagram for you. I also sent a link to a complete installation guide.

I can understand not wanting to remove the brush guard on your 2016 Ford F-250 Super Duty, but unfortunately there are no front mounted hitches that can fit with the guard, because like you said, they do mount in the same location. There are also not…

The only solution for attaching an awning to the side of a pickup camper like what you have would be with something like the Thule Hideaway part #TH490018 which can attach directly to the side wall of your camper. The Rhino Rack Batwing awnings…

Thank you for the pictures of your overload springs. Since you actually have upper overload springs and not lower overload springs you will instead need the TorkLift StableLoad Suspension Upgrade for Upper Overload Springs #TLA7202. These will mount…

I contacted Torklift on your 2013 GMC Sierra 2500HD with the upgraded 2-1/2" receiver. They confirmed that Item #TLC3212 is compatible.

For your 2012 Chevy Silverado 1500 extended cab with running boards the length of the cab the correct Torklift camper tie downs are the #TLC2220 and #TLC3212. The front set does come with bolt leaders like you asked about as well.