bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 2 Inch Hitch
  4. Class V
  5. 17000 lbs GTW
  6. Visible Cross Tube
THIS ITEM IS NOT A FIT FOR
2026 Ford Maverick
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"

Part Number: C15410
In Stock
$366.24
Retail:$619.95
You Save: $253.71
Trailer Hitch
Not Confirmed to Fit

2026 Ford Maverick

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your Ford F-350 Super Duty's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" part number C15410 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (284)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C15410

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Tows up to 17,000 lbs (GTW): Handles heavy trailers, campers, or boats with stable strength
  • Holds up to 2,550 lbs (TW): Supports large tongue loads for heavy-duty hauling setups
  • 2" Receiver Opening: Works with a wide range of towing and cargo accessories
  • Bolt-On Installation: Mounts to frame using included hardware—no welding required
  • Corrosion-Resistant Finish: Black powder coat over base layer stands up to rust and wear
Made in USA

Features to know about

Built for Heavy Loads: Class V Strength and 17,000 lbs GTW

When you’re hauling serious weight, you need a hitch that won’t flinch. This Curt Class V XD receiver is rated for up to 17,000 lbs gross trailer weight and 2,550 lbs tongue weight. It keeps the full rating even when used with a weight distribution system, so you don’t lose capacity when you add sway control or leveling gear. The square-tube design gives it extra backbone for big campers, heavy equipment trailers, or commercial loads that demand more from your setup.

Simple and Solid Install: Bolt-On, No Welding Required

You don’t need a lift or special tools to get this hitch mounted. It bolts directly to the frame using the included hardware kit and lines up with existing holes for a clean fit. The precision robotic welding ensures everything stays square and strong once it’s in place. With no drilling or welding required, it’s a straightforward DIY project that still ends with a rock-solid connection.

Lasts Through Years of Towing: Powder-Coated Steel That Fights Rust

The hitch is fully welded steel with a black powder coat finish over a protective base layer. That dual coating resists chips and corrosion from road salt, rain, and grime. Whether the hitch lives under your truck year-round or sees constant use hauling gear and trailers, the finish helps keep rust away so it keeps looking good and working hard.

Ready for Whatever You Tow: 2" Receiver for Standard Accessories

The 2" x 2" receiver opening gives you flexibility for whatever towing setup you run. It works with ball mounts, cargo carriers, bike racks, or any other standard 2" accessory. The high weight ratings mean you can switch between heavy towing and everyday utility without worrying about pushing your hitch too far.

Specs

Dimensions

  • Receiver opening: 2" x 2"

Weight and Capacity

  • Rating: Class V
  • Maximum gross trailer weight: 17,000 lbs
  • Maximum GTW when used with weight distribution: 17,000 lbs
  • Maximum tongue weight: 2,550 lbs
  • Maximum TW when used with weight distribution: 2,550 lbs

Warranty

  • Limited lifetime warranty

15410 CURT Trailer Hitch Receiver - Custom Fit - Class V Xtra Duty - 2"

Installation Details C15410 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.7

284 reviews
5 Stars
(234)
4 Stars
(37)
3 Stars
(5)
2 Stars
(3)
1 Star
(5)
Review Sort Icon
by:
2000 ford F-250 Super Duty
It fit perfect on my 2000 F250 and was easier they I thought it would be to install. It took less than an hour to remove the old class 4 hitch and install the new class 5. I used a floor jack to manage the weight during removal and install.
Mike L. profile picture
Etrailer Expert

Mike L.

10/8/2026

I'm glad to hear that James, nice job!!

by:
I didn't find any information on this site regarding if this would fit under a ranch hand bumper replacement. But luckily it did. It mounted right up as stated. I believe my spare tire is stock, and that also fit right back into place. The hitch has much more beef to it than stock. I haul a lot of different heavy trailers, both bumper pulls and goosenecks, can't wait to see how this unit works out.
Elliott profile picture

Elliott

6/16/2025

This is a great hitch. Very sturdy, gives great peace of mind. This hitch can handle a heavier trailer than the truck could.

by:
Sturdy! It came in a teared box but all hardware is there, smart way of packing the bolts! I think is double the size of the Ford one I had on. It took a while to take the old one down, the Curt is straight forward in mounting, took 45min with drilling (yes you need to drill the 2 holes for the outlet support, use self tapping screws, is faster). Its heavy, I put myself on the creeper and with the hitch on my belly went under the car with 2 long zip ties. Secured left first, and right after, the holes close to the bumper. The hitch will stay in position... because phisics. Then applied blue lock threader on bolts and... easy peasy. Torqued to 150ft/lbs. Done. The spare tire it will fit just fine.
by:
2000 Ford F-250 Super Duty
Very pleased with the hitch and fast shipping. I installed by myself in less than an hour. My pics show how to use 3 pieces of rope to lift and hold without hardly any physical lifting on my part. One rope at the rear up to the bumper a one on each front bolt hole to the front bolt hole in the truck frame. Just keep shortening the ropes until it’s tight to the frame and install bolts. Very easy. Factory spare tire still fits.
John profile picture

John

5/16/2025

Great! Very pleased.

by:
Installed very easy, very heavy duty perfect fit
by:
1999 Ford F-250 Super Duty
Super simple install. Drop the spare, unbolt the factory hitch receiver, and bolt the new one up. Took 20 minutes.
by:
2011 Ford F-250 Super Duty
This is a great replacement for the factory hitch on my 2011 F-250 Super Duty Crew Cab short bed truck, except it doesn't have all of the holes needed to attach the factory wiring harness (3 holes missing) or the trailer plug bracket (2 drilled and tapped holes). I drilled (17/32") and tapped (m8-1.25) the two holes needed for the trailer plugs, so they're back in place just fine. For the wiring harness, I just zip tied it in place for now. In my experience that will last about 3-5 years where it's at. Also, my factory sized full size spare just barely fit. When lifting the tire back into place you do have to push the tire back and forth to make sure you get it in just the right spot. See the pictures to see how much clearance there is - around 1" total.

There also was a hole that should've been drilled or a cutout that should've been included for the head of one of the bolts that holds in the charcoal (EVAP) canister. Because this wasn't included, the frame rail got bent when torquing down the nuts for this hitch. I included a picture of this as well. This item, more than any other small gripe I had above, is what cost this product one star.

I can also state that this fits well under the Ranch Hand Ford Sport Back Bumper that came on my used truck.

All in all though, I really like the hitch and I think it'll do great for the next thing I need to tow - a 90's 1/2 ton truck on a rental bumper pull vehicle trailer.
by:
2006 Ford F-250 Super Duty
The factory hitch had rusted completely through. This hitch from e-trailer looks like it will outlast my truck. The construction is far superior to the factory hitch. I was concerned that it would hang down and look silly since it doesn’t have the same contour of the bumper as the factory hitch does. But this hitch fits nicely under the truck and looks like it belongs there. Installation was simple with the included hardware and instructions.
Heather A. profile picture
Etrailer Expert

Heather A.

2/20/2025

I think the install looks great! Great job.

by:
2006 Ford F-350 Super Duty
Price is perfect, shipping was fast! As others have noted, the box arrived a little beat up. But that is to be expected with a heavy chunk of steel inside a cardboard box. Contents were packaged so there is no chance of missing parts.

Installation wasn’t bad. Use a large breaker bar or a heavy duty impact wrench to remove factory bolts. 350,000+ mile F350 from the rust belt came off with some muscle. This hitch lines up perfectly utilizing the Ford factory centering nubs.

One thing to note is that this hitch will require lowering your spare tire as it has a straight square tube instead of Ford’s factory bent tube that wraps around the spare tire. See pictures.

Installation for me took a little over 1 hour due to a lost security key for the spare tire winch. Ended up deciding to cut the winch cable and replace the winch. With a heavy duty impact wrench and the ability to lower your spare tire, complete installation should take no more that a half hour.
Tyler profile picture

Tyler

12/14/2019

Fantastic!

by:
1999 ford F-250 Super Duty
The hitch fit my Ford F250 superduty with plenty of clearance for the spare tire.
by:
2008 Ford F-450 Super Duty
Wrong size. I need a 42 inch wide hitch. Not 36.
by:
2007 Ford F-250 Super Duty
It was an exact fit. I'm 60 and with a couple of jack stands I had it in stalled in less than an hour. Instructions didn't mention it but I also used blue loctite on the bolts and the 7 pin/4 pin connector did not have any holes to connect it so I drilled 2 holes 1/4" into the hitch used original bolts and a nut driver to get them in place. Most people would not have that mechanical knowledge so in future there should be pre drilled holes for that. Overall good experience.
Dave R. profile picture

Dave R.

6/16/2024

Perfect fit. We have been all across the country and no issues. Excellent product.

by:
Great price and product
Shipping was lon
ger then expected
by:
2006 Ford F-350 Super Duty
Shipped quickly Great product very heavy duty installed easily.
by:
2005 Ford F-250 Super Duty
Delivery was supposed to be on Friday, did not come until Saturday and had to postpone our trip a day. I'm sure the hitch is nice, just disappointed it did not show up on time.
by:
Great hitch and easy to install. I towed a loaded 24 ft. And the hitch performed flawlessly
by:
I ordered a Curt 15410 extra heavy hitch for a 1999 F350. The single layer box with no internal packing material was no match for the 77lbs receiver hitch. I received a scratched up hitch. I contacted customer service. Paula from customer service quickly and fairly resolved my issue. It’s great people like Paula that make ETrailer a good place to shop. Thanks Paula.
by:
Very fast shipping and got installed without any issue. Very happy with the product.
by:
2005 Ford F-250 Super Duty
Curt makes quality hitch components. I cant wait to get it installed on my truck. E-trailer also had the best price for this exact hitch receiver and saved me $200
by:
The install went well. Be prepared to move your spare tire ahead about 6 inches. Perfect fit, looks way tougher than what was on there.
by:
2016 Ford F-350 Super Duty
The hitch receiver looks good. I used it to replace my factor Ford F350 hitch receiver for higher tongue weight ratings. Note that this hitch does not come with mounting holes for the factory wiring bundles that the factory hitch receiver had for wire attachment devices. I had to drill my own.
Also note that the etrailer shipping box was not well prepared. My hitch box came with holes and parts of the hitch sticking out. Luckily everything was there and no significant damages or scratches. etrailer really needs to improve their shipping process. No padding or wrapping inside the box to prevent this shipping damage was inside.
by:
The fit & finish was great, just that the box, or what was left of it didn't fair to well. The hitch seemed to have been undamaged though.
by:
Excellent hitch, looks good.Allows me to tow my 10K dump trailer.Super easy 2 person swap with a floor jack. Wife drove the floor jack.
by:
2000 Ford F-250 Super Duty
This hitch receiver was a direct fit for my 2000 F250. It took about 40 minutes to complete the whole job, and I definitely recommend having a helper. Other wise the job would have taken much longer.

I was amazed at how much bigger the curt receiver hitch is compared to the factory hitch. Definitely worth the purchase.
by:
Box was severely damaged in transit, but the hardware kit was securely taped to the hitch itself, which is good. Not surprising for an 80 lb steel piece wrapped in cardboard. Four stars because, despite being a 'direct fit' for my truck, the hitch interfered with an existing mounting screw on the frame rails that could not be relocated, so I had to grind some clearance in the mounting flange of the hitch. While it was a relatively minor inconvenience for me, it could be a show-stopper for someone without the proper tools to make the modification. Also, this hitch does not come drilled for the OEM receptacle bracket. etrailer recommended a strap-on option in one of the question responses that allowed me to bolt my existing bracket to it, but the band clamp that came with it was not large enough to go around the massive tube on this hitch. I was able to use a stainless steel 6" diameter hose clamp from the local big box store to clamp it on... Just barely.

Half the price of the local shops, super fast shipping, and in the end, it works great!
25
284
true
Show More Reviews

See what our Experts say about this CURT Trailer Hitch


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Joshua S
Video by:
Joshua S
Employee Alan C
Video by:
Alan C
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane T
Test Fit:
Shane T
Employee Jacob T
Video Edited:
Jacob T
Employee Patrick B
Video Edited:
Patrick B
Employee Andrew L
Video Edited:
Andrew L
Employee Dustin K
Video Edited:
Dustin K
Employee Sue W
Video Edited:
Sue W
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Michael B
Updated by:
Michael B
Employee Isabelle B
Updated by:
Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924