Weight of Curt Class III Trailer Hitch Receiver # C13394

Question

Question:

Just wondering how much this hitch weighs? Thanks.

asked by: Jason

0

Expert Reply:

The Cut Class III Trailer Hitch Receiver # C13394 weighs 49 pounds.

The hitch features a towing weight capacity of 5,000 pounds and a tongue weight limit of 500 pounds. I have attached an installation video below that you can also use for reference.

expert reply by: Chris R

0

Answer 1

I would be happy to help! The differences between the Curt Trailer Hitch Receiver #C13394 and #C13200 for your 2019 Toyota Highlander are that the #C13394 has a hidden cross tube meaning once installed the only visible section of the hitch will be…

view full answer...

Answer 2

A dual hitch extender like the Curt Dual 2" Receiver Tube Adapter, 8" Extension #D-192 will not effect your towing capacity, but will effect your tongue weight capacity by 50%. So depending on the tongue weight of your trailer, it may or…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 7

Hey Aaron, great question! The Trailer Mate Trailer Hitch Receiver #TMT67FR is definitely a budget friendly option for a hitch on your 2026 Highlander. This is basically the economy line from Curt. The welds are a little different (but will still do…

view full answer...

Answer 8

Hi David! We do have a plug in wiring harness for your 2024 Toyota Highlander XLE with the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56RV. This is fully plug and play and will use that square port/plug you already…

view full answer...

Answer 9

Hey Henry! Yes, the PowerMax AC to DC Converter #PM94VR is a great choice for your setup. The 55A output pairs well with your 900W generator, so you’ll get fast charging without overloading it. This will give you lithium compatibility with efficient…

view full answer...

Answer 10

Hi Alex; the gauge on the Big Truck Big RV Tongue Weight Scale for Trailers #BTBRV004 has a +/- 5% full scale accuracy and displays weight in 20-lb increments up to 1,000 lbs. We also have it available with a SnapPad #BTBRV99FR. If you want something…

view full answer...

Answer 11

Hey Michael, this is a great question but you can use a tongue weight scale like the B and W part #BW34KR with a lighter tongue weight like what you have (relative to it's 4k capacity) and it will still work great. We had the chance to demo this…

view full answer...

Answer 12

Hey George, typically tongue weight is 10 to 15 percent of the total trailer weight so there is a very good chance the Curt RJWeight Distribution system part #C75RJ is what you need as it has a tongue weight range of 800-1,200 lbs like you noted. If…

view full answer...

Weight of Curt Class III Trailer Hitch Receiver # C13394

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching