Mount: Curt Trailer Hitch Receiver on a 2019 Toyota Highlander Video

So long as the full size spare tire on your 2019 Toyota Highlander does NOT have an aluminum rim, it will still fit after installing the etrailer Trailer Hitch Receiver #e98844. I also wanted to mention, if you were looking to tow and needed trailer…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

You can have a Toyota dealer run the VIN number to determine how your 2018 Toyota Highlander is equipped. As far as trailer wiring you can check under the dash for any sort of wiring converter. It may or may not be labeled. Or you can find where a…

For your 2022 Subaru Outback the best hitch for towing is the etrailer Trailer Hitch Receiver #e25TR. This is a custom fit Class III hitch with a 2" receiver. It has a maximum gross trailer weight of 3,500 lbs and tongue weight of 350 lbs. It…

The hitch receiver that I recommend is the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C73DR. This hitch receiver has a maximum tongue weight of 525 lbs and a maximum gross trailer weight of 3,500 lbs. or 4000 when using a weight…

I am not aware of any instance where a trailer hitch properly installed on a Toyota Highlander has been broken or bent. As long as the 5000 lb towing capacity/500 lb tongue weight of the #C13394 or the 6000 lb towing/900 lb tongue weight capacity of…

I am happy to help you determine if your 2018 Toyota Highlander has a tow package or not. The easiest way is to visually inspect your vehicle on your own. If you take a look at the video for part #118449 that I attached on a 2018 Toyota Highlander…

If your 2019 Toyota Highlander has the factory converter and tow package the port that the 4-way pigtail of either 4-way kit plugs into will be active. So you could test the pins of the the connector with a circuit tester like part #PTW2993 while…

I was able to confirm with the manufacturer that the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13200 is a fit for your 2018 Toyota Highlander XLE. For your trailer wiring, if you don't have the OEM 4-way, you need the Curt…

The Curt Trailer Hitch Receiver part #C13394 which is a fit for a 2019 Toyota Highlander is made in the USA. This hitch provides a class III 2" receiver tube opening.

Th Curt Trailer Hitch #C13394 is a confirmed fit your 2019 Toyota Highlander as long as you do not have your spare on an aluminum rim. The aluminum rim is too wide for all of our hitches. This hitch is a great choice because it has the hidden…

For your 2018 Toyota Highlander we have the Curt hitch parC13394 which is a confirmed fit and fits well with a full-sized spare as long as it does not have the aluminum rim. I attached an install video and installation instructions for you.