bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class III
  4. 2 Inch Hitch
  5. 5000 lbs GTW
  6. 500 lbs TW
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # C13394
Retail:$449.23
Our Price: $250.64
You Save: $198.59
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 49 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13394 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (131)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C13394

  • Class III
  • 2 Inch Hitch
  • 5000 lbs GTW
  • CURT
  • 500 lbs TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 5,000 lbs
    • Maximum tongue weight: 500 lbs
    • Not rated for use with weight distribution systems
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13394 Curt Class 3 Trailer Hitch Receiver

Installation Details C13394 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13394

Average Customer Rating:  4.7 out of 5 stars   (131 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:
2020 Lexus RX 350 L

Great for my bike rack and hauling my bikes around on my 2020 Lexus RX350L. I wanted the 2” inch receiver for my heavy duty Yakima rack. Instructions were slightly unclear about how much of the bumper facia had to be trimmed. I had to trim the plastic bumper facia the entire length of the receiver. Also, two of the brackets between the frame and bumper had to be removed to allow clearance for the receiver. A lot more modification of the bumper and brackets than I expected. The good news is you don’t see the trimmed plastic when you look at the car. The other downside is that you lose the kick sensor to open the hatch. It get blocks from the receiver. I am trying to see if I can move it or trim more plastic to expose it. The overall appearance of the receiver is nice from normal view. You only see the receiver which is very nice, looks like factory. Have another strong person helping you with the installation and all will be well.



by:

Hitch arrived a day earlier than estimated. Thanks to etrailer’s tracking link, and a video link showing installation, I was able to prep the undercarriage for installation before the hitch arrived. A bit cumbersome but I was able install the hitch by myself. Only issue I had was that one of the bolts wouldn’t line up without using some leverage to spread the hitch’s support arms. Total install time was around 1 hr. This is the second hitch I’ve purchased from etrailer and installed. Both have been relatively easy installs. I’m a happy customer



by:
2020 Lexus RX 350 L

This curt hitch fit my 2022 RX350L. The six holes in the hitch were mostly aligned, although it did require use of a crowbar to open the hitch slightly for the last two bolts. The install took under an hour and I am pleased with the result. At some point I may add a wiring harness too.



by:
2018 Toyota Highlander

The looks are perfect , it looks great on the highlander and feels rock solid. My only complaint was that the mounting holes did not line up correctly, about 1/8” off on 2 out of the 6 mounting holes, separate sides, which does not sound like much but try flexing a trailer hitch haha, I had to flex it with a crowbar and wood to spread the hitch bar and line it up..it added some time to the job. Nevertheless the hitch is on and it looks great and the quality seems top notch. I do recommend this hitch and it would have 5 stars if I didn’t Have that 1 issue.

Etrailer Expert

Brooke M.

12/14/2022

It sounds like you had a case of the Flexed Hitch, and I am glad to see you were able to correct the bend to be able to install it! This happens frequently in the shipping process where the hitch can become flexed. We even have a help article dedicated to it and I have linked it below if you ever need any tips on how to correct a flexed hitch.

Thomas

12/11/2023

After a year of use this is still a very solid trailer receiver, looks great on the highlander as well, hidden very well.. looks way better than the factory trailer receiver.



by:
2022 Lexus RX 350 L

This hitch does not clear the bracket holding the pre wired connections for trailer lights on my Lexus RX350L. It is located passenger side above the exhaust outlet. The bracket is factory installed. I am using this for a bike rack so I removed the wiring connection from the bracket which allows the bracket to be pushed up enough to correctly bolt the hitch on.



by:

After a small hiccup with the wrong hitch being sent, this was a flawless install and top-notch customer service. They have made a customer for life. Oh, and the hitch is great too. We’re across the country now with 10K miles pulled so far. Thank you George!!

Gary

12/10/2023

After a year of use and abuse, this hitch is absolutely rock solid. We’ve used it with our trailer and various accessories made for haulingstoragecamping. Highly recommend.



by:

The fit, installation and capabilities were just as advertised. With The help of a buddy with all the right hand tools, we installed the trailer hitch in less than an hour. I use the hitch for a bike rack...tested with heavy e-bikes driving 2000 miles round trip across 4 states.



by:

Looks great on the car. I like that you can pretty much only see the receiver, where on some other models you can see the tubes. I wanted to go OEM, but couldn’t justify paying more than double.
Installation videos were very helpful. There was a little challenge getting one of the six bolts on. I tried spreading the arms a little, but didn’t have much luck. I found the after getting a bolt, loosely, in each side, then installing the rest on the passenger side, I could use a ratcheting clamp to get a enough play to install the last bolt (driver’s side toward front). I then went back and torqued all to spec.
Please excuse the dirty car in the pics.



by:

Your ad for this hitch didn't list it fitting my 2021 Lexus rx450hl. But it fit perfectly with minor cutting of some plastic under body panels. It looks great and all you see is the receiver everything else is hidden

Etrailer Expert

David B.

10/10/2022

Thats awesome it worked out for you! I do have to say that it still isnt a confirmed fit however. And this may very well be a matter of luck on your part. For the best results I highly recommend using our fit guide make sure you get the best product and solution for your needs.

Steve

9/5/2023

Hitch was ez to put on took about 45 mins. I pull a light weight trailer for lawn supplies once in a while but use the hitch primarily for my bike rack. I did no drilling it bolted right in after cutting some plastic panel. Which I shaved and replaced. No more to say it was a piece of cake!!

Etrailer Expert

Mike L.

10/24/2023

@Steve That's great to hear! We're glad the Curt # C13394 hitch is working well for you...


by:
2019 Lexus RX 450h L

The install was easy but required two persons. The instructions were very good. For those with the Lexus RX 450hL, this hitch fit like a glove. Now I can haul my two eBikes with ease. Thanks etrailer!

Allan

8/17/2022

Looks like an OEM hitch and functions well. We take our bikes everywhere we travel. Don’t pull a trailer, but for us this hitch put the U back in SUV for us. Anyone who has a 2019 450hL with the spare tire underneath the back, this hitch plaits like a glove using the existing tapped and threaded holes. Good job Curt!!



by:

Great quality and price! Excellent customer service - everyone was very helpful, provided information and followed up on order. The hitch was relatively easy for one person to install, required minimal cutting and looks great!



by:

The hitch arrived promptly, and the installation was not difficult. The direction for installation were good, and the how to videos were very helpful. I'm satisfied with both the product and the service, thanks.



by:

Excellent trailer hitch for the 2016 Toyota Highlander. I use it for hauling Jet Ski's. Installation was easy while using a jack and a bucket to hold it up for me.



by:

Added this to my new to me 2015 Highlander Limited. I really liked because it is really hidden under the car other then the receiver. The first one came and it was bent, so it did not line up with the holes in the frame. Contacted etrailer and they quickly sent a new one, which installed perfectly. So other then that glitch, it was a perfect experience. Would highly recommend this product.



by:
2016 Toyota Highlander

2016 Toyota Highlander XLE with Tow Package:

Ordering
was easy and the shipping was very fast. Only a few scratches on the paint job which was really remarkable considering it's shipped only in cardboard. A quick hit with Rust-Oleum glossy black and it was as good as new. The enclosed instructions were ok, but somewhat lacking in detail and the pictures were almost too dark to make out what they were trying to demonstrate.

Step #4 about trimming the plastic fascia tabs for the lower fascia have zero detail, pics or diagrams. It becomes pretty obvious when you hoist the hitch into position, but that's an awkward time to discover what you have to trim.

The only reason this is a 3 vs 5 stars is the slots for the mounting bolts did not line up with the weldnut hole in the frame rail. And it wasn't due to shipping since it was the forward slot on the driver's side and the middle slot on the passenger side. Ultimately I was able to get the bolts in, but they only went in with a liberal coating of naughty words and about 14lbs of elbow grease.

Had the precut slots in the hitch lined up properly with the weldnut holes, my rating would have been a 5-Star, so your mileage may vary and your slots might line up perfectly.



by:

Excellent quality and I’m glad I got the one that tucked under the bumper because it looks like it came from the factory that way. Took me about 1.5 hours for the install but I took more time to trim the plastic pieces than normal people would.



by:
2022 Lexus RX 350 L

Hitch looks super heavy duty, extremely heavy which is definitely a plus. The reason why I’m giving it a 2 star is because when installing it, I had issues with the two rear passenger side bolts not lining up with the cut out even though the holes were oval to allow some flexibility. I eventually was able to use a pry bar to line up the rear most hole and thread it in. This caused unnecessary headaches and made the install much longer than anticipated. If the drilled cut out hole for the middle of the passenger side was just cut inwards by about 3-4mm, it’d bolt up no problem. The driver side bolts went in without any issues. I ended up leaving that middle bolt out since I won’t towing, but using it for a bike hitch only so I don’t see a big problem with it. I also had an issue with how the product was shipped. There was no padding if any sort to support the item from breaking through the cardboard box, cmon, this thing weighs alike 50lbs, and it was just sitting in the box. When the item was delivered, with it being thrown around, the box had ripped open, exposing the product to some paint damage. Some foam padding, or thin wood pieces to protect would have been useful.



by:
2019 Lexus RX 450h

I ordered this for my 2019 Lexus RXHL hybrid SUV. With only minor cutting for the install, it fits perfectly. It's says on the site doesn't fit, but it does. I do have to turn off the automatic break sensor so it doesn't auto break when I have the bike rack on. Only git it fir bike rack or minor tow like luggage tow.



by:
2020 Lexus RX 350L

Fit great on our Lexus RX450hL even though not a listed vehicle.
It does prevent the foot-wave hatch-opening feature from working.

Marc

12/9/2023

Hitch is great. Still looks good no rusting. Wife still complains that foot-wave hatch-opening doesn’t work.

Etrailer Expert

Mike L.

12/9/2023

@Marc Have you tried waving your foot more to the left or right of the receiver tube? Also, try putting your foot a little further under the vehicle...


by:
2020 Lexus RX 350 L

A few weeks ago I installed the Curt C13394 hitch from etrailer.com on my 2020 Lexus RX450hL. etrailer and Curt don't seem to know that this hitch which is meant for the 350L does also fit the 450hL but it fits perfectly. The install was fairly easy, I did it all myself except I had my son help me to lift it into place and get the first few bolts in place. The videos on etrailer are helpful, but there isn't one for a Lexus RX for this hitch. However, there is one for another hitch that installs very similar, so suggest watching the Lexus RX350L install video. The biggest task was probably cutting the driver's side panel to go over the hitch since they don't give you a template or anything. What I did was pushed it into place to see where it hit the hitch and then tried to just trim the minimum amount necessary with a Dremel and a cutting blade. The second picture shows the panel after I trimmed it and re-installed it. The third picture is the front part of that same panel to show where I trimmed it there.

I won't be towing with this vehicle so I only installed the hitch and didn't bother with the electrical hook up. I just need it for a bike rack and possibly a cargo carrier. Most of the time I only need to carry one bike so this will allow me to have a small single bike rack most of the time and I can add room for a second rack only when I need it.

I'm very happy with this setup. Attached are some pictures.



by:

Hard to tell. Still trying to find the 4-pin connector. Instructions are for a Highlander and not relevant.



by:
2018 Toyota Highlander

Hitch fit well on my 2018 Highlander and seems sturdy. As another review pointed out, you don't need to trim as much of driver-side panel as the instructions state if you want to preserve that panel as much as possible. Also, as shown in one of the installation videos, you don't need to cut off the bumper trim supports -- just disconnect so they can flex as you install hitch. That way the bumper trim is still well supported after install.

There were a couple small scuffs from shipping I decided to hit with paint before installing. No big deal, and I probably could have ignored since they were surface only.

Plan on getting a second person to help. Navigating around the muffler as you get hitch into place really is a two person job, even if you have a good jack.

It would be nice if Curt provided a welded bracket for mounting 7-way harness connector...or even something generic with holes in a good location to bolt a bracket onto. But that's a minor gripe -- I'll probably just drill and tap for a bracket.



by:
2018 Toyota Highlander

First of all this is my fifth or sixth purchase from "etrailer.com" their prices cannot be beat!! Thanks for that. This hitch was installed on my "new to me" 2018 Toyota Highlander Limited. As a very qualified Toyota tech was doing the install, we did not exactly follow the video instructions that were for a 2019 and 2017 (attached to my order). Anyway the install was clean and well done, the large "tab" over the exhaust was cut/trimmed away. The other two small arms/tabs were NOT removed and added to the clean install. My only issue, would be that there was no "retention" port/plug for the 4 pin wire harness, so it hangs free. See pictures. Otherwise very happy. thanks again etrailer.



by:

2017 Toyota Highlander Hybrid. Fit and quality is better than expected, it’s pretty much OEM but half the price. Very discreet and not an eye sore. Only problem was one of the bolt had a manufacture defect on the thread. Contacted etrailer and they sent a new hardware kit.



by:
2019 Toyota Highlander

This is my second hitch purchases from etrailer. I would have given 5 stars however, like noted in some reviews my hitch too was bent, almost a inch off. The best way I found to bend it back in shape is use two 4x4 post pieces and a hydraulic jack, used from my Yukon.. Otherwise it is only a 30 minute job to install. I recommend, since this seems to be a issue from time to time, is place either a 1x1 or 2x4 or other ridged device to ensure the hitch maintains its shape during shipping. You guys have great vids showing how to install. Highly recommend your products.

Thank you...


25
131
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • What Is The Width Of The Curt Trailer Hitch Receiver C13394 Measured Center To Center Of Bolt Holes
    I had our warehouse measure the Curt Trailer Hitch Receiver # C13394 for your 2018 Toyota Highlander and from the center of the one side of the bolt hole to the bolt hole on the other side measures 41" as shown in the included diagram. If you measure your hitch and it does not measure 41" then you will want to follow the included help article to straighten the hitch. I also included a video of the # C13394 for you to take a look at.
    view full answer...
    Image 1 for
  • Does Curt Hitch for 2016 Toyota Highlander Allow Full Size Spare to be Stored
    If you were in a situation where you had to install your spare wheel from your 2016 Toyota Highlander the normal wheel you have mounted on the vehicle would not be stored underneath it if you installed the Curt # C13394 or even any other hitch. You'd want to temporarily store the wheel in the vehicle. This hitch does allow a full sized spare to be stored underneath but not the aluminum spare.
    view full answer...
  • Compatibility of Aftermarket Hitches with 2017 Toyota Highlander Hybrid Limited
    Curt Manufacturing has confirmed that their 2-inch Class III hitch # C13394 fits on the hybrid version of the 2017 Toyota Highlander and is a no-drill install. We had the chance to install one on a 2015 Highlander and the video link provided will let you see that entire process. We just have not yet had a local owner of the 2017 hybrid come in for hitch installation. Do note that if you Highlander will come with a full-size spare tire, it will work with this hitch as long as it is not on...
    view full answer...
  • Trailer Hitch Recommendation for 2018 Toyota Highlander that Allows Full Size Rear Spare
    For your 2018 Toyota Highlander we have the Curt hitch parC13394 which is a confirmed fit and fits well with a full-sized spare as long as it does not have the aluminum rim. I attached an install video and installation instructions for you.
    view full answer...
  • Curt Trailer Hitches for 2019 Toyota Highlander
    Th Curt Trailer Hitch # C13394 is a confirmed fit your 2019 Toyota Highlander as long as you do not have your spare on an aluminum rim. The aluminum rim is too wide for all of our hitches. This hitch is a great choice because it has the hidden crosstube. Check out the install video that I have attached for you.
    view full answer...
    Image 1 for
  • Trailer Hitch Recommendation for 2016 Highlander XLE that Allows Storage of Full Size Spare
    I apologize for any confusion, but the Curt hitch part # C13394 will work with the full size spare on your 2016 Toyota Highlander. I attached an installation video for you to check out.
    view full answer...
  • Weight of Curt Class III Trailer Hitch Receiver # C13394
    The Cut Class III Trailer Hitch Receiver # C13394 weighs 49 pounds. The hitch features a towing weight capacity of 5,000 pounds and a tongue weight limit of 500 pounds. I have attached an installation video below that you can also use for reference.
    view full answer...
  • Will The Curt C13394 Hitch Fit A 2017 Toyota Highlander Limited
    The Curt # C13394 will actually fit all versions of Toyota Highlander in the 2017 model year, so there will be no issues there. There will be trimming required with all the hitches to get them installed on your vehicle, but I included an install video we did of this hitch on a 2017 Highlander for your to check out. This shows exactly what will be needed. The instructions that come included with the hitch also lays out where you need to trim as well. This will also fit with a full size spare...
    view full answer...
  • Recommended Concealed Trailer Hitch for 2019 Toyota Highlander
    For your 2019 Toyota Highlander I highly recommend the Curt Class III Trailer Hitch # C13394, which features a hidden-crosstube design so that only the 2" receiver is visible and also has a superior powder coat finish that tends to last longer than those from other manufacturers (longer corrosion resistance). That hidden design will maintain a clean, OEM-like appearance (see attached image) and it offers a 5,000 pound towing weight capacity. I have included a full install video below...
    view full answer...
    Image 1 for Image 2 for
  • Best 2" Trailer Hitch Receiver for 2019 Toyota Highlander
    The best 2" trailer hitch receiver for your 2019 Toyota Highlander is the Curt # C13394 because of its sleek hidden-crosstube design paired with a superior powder coat finish that tends to last longer than those from other manufacturers. This will greatly reduce corrosion and rust build-up over time. On this Curt Class III hitch only the receiver itself is visible at the rear of your Highlander (see attached images) to maintain the clean, OEM appearance on your new vehicle. The hitch...
    view full answer...
    Image 1 for Image 2 for
  • Will Curt Trailer Hitch Fit a 2022 Lexus RX 350 L
    Yes, the Curt Trailer Hitch Receiver # C13394 will fit your 2022 Lexus RX 350 L as long as it doesn't have the Twin-Tip Exhaust. As far as the rear door kick sensor is concerned, we haven't heard anything about that but it isn't uncommon for hitches to get in the way of the sensors so you may need to move your foot around using different motions at various locations to see if the sensor can then pick it up. I don't know of a relocation sensor kit but if you speak to your local Lexus dealer...
    view full answer...
  • Does Curt Hitch # C13394 Fit 2016 Toyota Highlander with Full Size Factory Spare
    For your 2016 Toyota Highlander the Curt hitch part # C13394 that you referenced is a confirmed fit and will work well. Curt also specifically noted that this hitch works well with the full sized factory spare of the vehicle, as long as it is not on the aluminum rim. The aluminum rim is too wide for all of the hitches that we have to fit your 1016 Highlander. I attached an install video for this hitch for you to check out as well.
    view full answer...
  • Will a 2001 Chrysler Town and Country Trailer Hitch Fit on 2016 Toyota Highlander
    Trailer Hitch Receivers are custom fit for specific vehicles. I could not find a trailer hitch that would be capable of being installed on both a 2001 Chrysler Town and Country and a 2016 Toyota Highlander. For your 2016 Toyota Highlander I recommend the Curt Class III # C13394. This is a Class III, 2 inch trailer hitches with generous tongue and towing weight capacities. I have provided an installation video link for this trailer hitches on a2015 Toyota Highlander. This hitch would...
    view full answer...
  • Does Curt Hitch C13394 Fit 2019 Toyota Highlander
    The Curt hitch part # C13394 is a fit for your 2019 Toyota Highlander and is a great choice overall. It does not require anything else to install either as it comes with all of the needed hardware. It will allow you to keep your full-size spare as long as it is not on the aluminum rim. The aluminum rim is too wide for all of the compatible hitches for your 2019 Highlander. I attached an install video for more info as well.
    view full answer...
  • What to Do If My Hitch Bolt Holes Dont Line Up
    In all likelihood your hitch like the Curt # C13394 is just slightly bent, which would cause the holes to be misaligned. Some people will use open steps for leverage, vices and even car jacks to apply controlled force to bend the hitch back. You will need to check for flaking paint and physical stress marks on the hitch before and after you attempt to bend the hitch back and in order to ensure that it was not physically damaged. If you anything abnormal on the hitch you should not use...
    view full answer...
  • Hitch For 2020 Lexus RX 350L
    Yes, the Curt hitch part # C13394 is a confirmed fit for your 2020 Lexus RX 350L as long as you do not have the dual exhaust. I attached an install video for this for you to check out as well.
    view full answer...
  • Is Draw-Tite Hitch and T-One Wiring Correct for a 2015 Toyota Highlander?
    I am happy to confirm that the Curt # C13394 is a fit for your 2015 Toyota Highlander and T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118449 is the correct wiring.
    view full answer...
  • Comparing the Curt Trailer Hitch for a 2019 Lexus RX 350L
    Yes, I have attached some photos for you of the Curt Trailer Hitch Receiver part # C13394 installed on a 2019 Lexus RX 350L. The Curt Trailer Hitch Receiver has a hidden design so that only the receiver tube is shown and it is almost flush with the rear bumper fascia as well. In regard to installation, the Curt Trailer Hitch Receiver includes all installation hardware and has a no-drill install. I recommend the Curt Trailer Hitch Receiver because they are great quality and has a durable...
    view full answer...
    Image 1 for Image 2 for
  • What Causes Hitch Accessories to Bounce or Move at Rear of Vehicle When Travelling
    The shanks of the Curt hitch # C13394 that you mentioned is totally fixed and would not flex or cause movement/bounce. It essentially will be as rigid as your vehicle frame since it is so well reinforced. The length of the hitch tube would have really no bearing on movement of hitch accessories, but we do have ways to greatly reduce this type of movement with anti-rattle devices such as the # 63232 which install in the hollow shank of a hitch accessory and hold it tight against the hitch...
    view full answer...
  • Removing or Trimming the Underbody Panel on a 2014 Toyota Highlander for a Curt Trailer Hitch
    The installation instruction for the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13394, which I have linked, shows how much of the panel is trimmed. The installation video that I have attached will show you exactly how it is done.
    view full answer...
  • Does Curt Hitch part # C13394 Fit Lexus RX 350L or Toyota Highlander
    For your 2018 Lexus RX350L the Curt hitch part # C13394 is a confirmed fit. Since your vehicle shares the same platform as a Toyota Highlander this hitch also fits that vehicle. Since the Highlander is a much more common vehicle we've had the opportunity to install this hitch on one of them but not a Lexus. The fit is the exact same though.
    view full answer...
  • Curt C13394 for 2016 Toyota Highlander
    The Curt # C13394 has a very resilient powdercoat and it's made in the USA. It fits great and will work with your spare as long as it is not the Aluminum rim. The aluminum rim is too wide.
    view full answer...
    Image 1 for
  • Trailer Hitch for 2018 Lexus RX350 L
    We do now have one confirmed hitch that fits the 2018 Lexus RX 350L as long as it does not have dual exhaust, the Curt # C13394 which is a Class III hitch rated for 500-lbs of tongue weight and 5000-lbs towing weight. I have attached the installation instructions and an installation video for you to learn more.
    view full answer...
  • Recommended Trailer Hitch for Bike Rack for 2015 Toyota Highlander
    The Curt Trailer Hitch Receiver part # C13394 is what I recommend for a 2015 Toyota Highlander. This hitch has a hidden design so the only thing shown under the bumper is the receiver tube. The hitch pin hole is only 1" behind the rear bumper so there will be no bumper clearance issues to worry about with folding accessories. It requires no drilling for installation. Please note, the j-pin stabilization device is discontinued and no longer used.
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Dustin K
Video by:
Dustin K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Wilson B
Updated by:
Wilson B
Employee Isabelle B
Updated by:
Isabelle B
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Clayton O
Test Fit:
Clayton O
Employee Kristina F
Written by:
Kristina F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924