Required Fascia Trimming When Installing EcoHitch # 306-X7345 on 2018 Honda CR-V

Question

Question:

I like the fact the hitch is hidden and you see only the receiver. I need to know what is meant by Some Facia Trimming just how much and will it be seenThanks

asked by: Mike

1

Helpful Expert Reply:

The hidden design on the EcoHitch Trailer Hitch Receiver # 306-X7345 for your 2018 Honda CR-V is definitely a really nice feature that helps to maintain a sleek factory appearance on the vehicle. When installing the hitch you will just need to cut a 1-3/4 x 2 inch opening on the underside of the bumper to accommodate the hitch receiver. Since the trimming is on the underside of the bumper it won't be seen from the rear.

I have attached a couple images from the installation manual that will be included that show this process.

expert reply by: Chris R

1

click to enlarge

Answer 1

Hi Rob, both the etrailer hitch part #e98848 and the EcoHitch part #EH25KR will install and function properly on your 2026 CR-V Hybrid Sport Touring, so you’re not risking choosing a hitch that won’t work. Both hitches use a hidden cross tube and…

view full answer...

Answer 2

Hello David. With any after market hitch, it is possible for it to get in the way of the sensor for your hands-free tailgate, especially when in use. The EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2" #EH25KR is going to be your best…

view full answer...

Answer 3

I was able to track down the installation instructions for the EcoHitch Hidden Trailer Hitch Receiver #306-X7317 referenced in your question and have attached the images from the manual below. I have also sent you a separate email with the PDF file…

view full answer...

Answer 4

Hello Bobby, thanks for reaching out. I can definitely provide some helpful information for you, but sadly there is no online version of the instructions for the EcoHitch #EH25KR. I can tell you it will be a no drill install. You will need to…

view full answer...

Answer 5

Our fitguide can be somewhat confusing at times but the EcoHitch part #306-X7345 that you referenced does fit the Hybrid and Touring models. It also fits the models that aren't Hybrid and Touring which is why you saw the message you mentioned.…

view full answer...

Answer 6

The lift gate feature on your 2022 Honda CR-V Touring Hybrid is blocked or obscured to the point you have to actively try to find the sweet spot where it still works with hitch receivers, like the etrailer Trailer Hitch Receiver - Custom Fit - Matte…

view full answer...

Answer 7

For your 2021 Honda CR-V there is quite a few trailer hitch receivers that fit the criteria you mentioned, the etrailer #e98848, the Curt #C13397, the Draw-Tite #DT79MR, and the EcoHitch #306-X7345. These hitches are really all pretty similar as they…

view full answer...

Answer 8

We do have a couple options for your 2022 Honda CR-V, however I recommend the EcoHitch Hidden Trailer Hitch Receiver #306-X7345. This hitch is capable of handling up to 3,500lbs trailer weight, and 525lbs of tongue weight. For wiring, I recommend the…

view full answer...

Answer 9

The reason the Curt Trailer Hitch Receiver #C13397 for your 2019 Honda CR-V requires you to use the lift gate sensor relocation bracket and the Draw-Tite #DT79MR does not is due to the crosstube to sitting lower which allows you to move the antenna…

view full answer...

Answer 10

If you were to install both the Draw-Tite Max-Frame Trailer Hitch Receiver #DT79MR (76342) and #76128 on your 2022 Honda CR-V you'd find that the DT79MR is going to sit about 1/2" higher so these are relatively at the same height. With that…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Required Fascia Trimming When Installing EcoHitch # 306-X7345 on 2018 Honda CR-V

Product Page this Question was Asked From

Continue Researching