Easiest Brake Controller Solution for 2018 Kia Sedona

Published 02/19/2019

Products Featured in This Question

Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector

(809)

$85.33

10 Gauge Wire - Blue Primary - Per Foot

(104)

$1.75

Adapter 4-Pole to 7-Pole and 4-Pole

(663)

$31.52

40 Amp In-Line Circuit Breaker - Perpendicular Mount Bracket

(97)

$9.85

Curt Echo Wireless Brake Controller - 7-Way Plug-in w/ Bluetooth App - Up to 2 Axles - Proportional

(1782)

$279.95

Question:

What Id like to have: -Brake Controller -both 4 flat plug and 7 pin plug available, preferably from same wiring harness Vehicle: 2018 Kia Sedona What parts do I need to make this happen in the easiest plug and play fashion possible?

asked by: Jose

Expert Reply:

You will need to start with a 4-way (if you do not have one) on your 2018 Kia Sedona. For that you would want the # C56332.

From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the 7-way adapter part # 37185 which also has a 4-way on the side of it. Once you plug this in and then run a power cable from the black wire of it to the positive post of your vehicle battery using 10-gauge wire like part # 10-1-1 (sold by the foot) and through a breaker like # 9510 and you'll be set for installing the easiest to install brake controller we have the Curt Echo part # C51180. Basically, you'll just plug this into the 7-way and then sync it to your smart phone and you'll be on your way.

expert reply by: Jameson C