Which 5 Lug and 6 Lug Hubs Use Inner Bearing # L68149 and Outer Bearing # L44649

Question

Question:

Need to know what hub is needed the inner Bearing is a L68149 and outer is a L44649 not sure how many lugs this second but if you could send me part numbers for the 5 and 6 lug that would be perfect.

asked by: Trevor

0

Expert Reply:

For a hub with a 5 on 4-1/2 inch bolt pattern you would want a Trailer Hub Assembly # 84545UC1-EZ. This hub uses a # L68149 as an inner and a # L44649 as an outer.

For a hub with a 6 on 5-1/2 inch bolt pattern you would want a Trailer Hub Assembly # 84655UC1. This hub uses a # L68149 as an inner and a # L44649 as an outer.

I attached a video on how to remove and install a trailer hub for you to check out also.

expert reply by: Jameson C

0

Answer 1

Hey Paul, this a great question but the bleeder location on the DeeMax caliper part #DE83YR wouldn't be an issue for use on either side of the trailer. It will still bleed the air out and you wouldn't have to worry about the air not wanting…

view full answer...

Answer 2

Hey Kris, the Dutton Lainson winch part #DL15440 does not come with a strap so you will need to order one with it. The part #DL24250 will work great with this winch as it is correct width, is 25 feet in length, and has a capacity of 3,700 lb WLL and…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hello Randy, Great question. For replacing bunk boards on a 20 ft bass boat trailer (like #CE27845), you’ll want 3/8 inch diameter lag bolts that are 1-1/2 to 2 inches long, depending on the thickness of your bunk brackets. Go with hot-dipped…

view full answer...

Answer 5

Hello Chad, thanks for reaching out. The CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers #CE27672 will work fine with a StarCraft tri-toon, assuming you’ve got a pretty standard bunk-style trailer under it. We’ve put those on plenty of…

view full answer...

Answer 6

The UFP hub that you've referenced isn't made any longer I don't believe, but we do have some options for you. From some previous customers, we've determined that the UFP H-1062-3 axle has a spindle that has #L44649 inner and outer…

view full answer...

Answer 7

To find the correct hub for your axle you typically need to find the part numbers for your bearings and grease seal, or the diameter of the different spots that they sit on your spindle. We actually have had a customer who sent this information in to…

view full answer...

Answer 8

The Dexter Hub part #8-258-5UC1-EZ is an exact match for the hubs you have on your trailer currently and would be a great choice. Bearing Buddies can be pretty convenient but the problem with them is that they make it too easy to over fill the hub…

view full answer...

Answer 9

Hello Timothy, Happy to help you get your Coleman set up safely and towing solid again. A worn coupler or the wrong hub and drum setup can lead to a loose, shaky tow, which can cause extra wear and make trips stressful. Getting the right parts in…

view full answer...

Answer 10

Trailer hubs have two bearings, one is referred to as the inner bearing, closer to the trailer. The outer bearing is the one furthest from the trailer. If we have both of these bearing numbers we can identify which spindle or hub is needed. So far…

view full answer...

Answer 11

Verify your bearing numbers and bolt pattern to be sure but I believe either #8-258-5UC1-EZ for E-Z Lube axles or #8-258-5UC1 for standard axles is what you need. Both of these hubs include bearing #L44649 for the inner and outer. They have a 5 on…

view full answer...

Answer 12

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Which 5 Lug and 6 Lug Hubs Use Inner Bearing # L68149 and Outer Bearing # L44649

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching