bing tracking image
Customer Service My Orders
  1. Home
  2. Help Videos And Articles
  3. Trailer Brakes Help Hub
  4. Trailer Brakes Q&As
  5. Question 299504
Q & A Icon

Replacement Brake Kit Recommendation for 2000 Rockwood Premier 2317G Pop Up  

Updated 06/05/2018 | Published 06/04/2018



Question:

hi - I need to replace the trailer brakes on my 2000 Rockwood Premier 2317g popup camper. Do you know what size brakes I would need? Thanks

0

Expert Reply:

From my research the Rockwood likely has a 3,500 pound axle and therefore uses 10 inch brakes. The 10 inch brake assemblies I recommend for you (And almost always recommend) are # AKEBRK-35-SA. These are self-adjusting so after the original set up they won't need to be adjusted again. Both the left and right hand side are included, and labeled to make installation easier. Also the mounting bolts are included but you'll need the nuts and lock washers, part # BRKH10B.

Our most popular hub and drum assembly for 3,500 pound axles that includes the bearing kit is # AKHD-545-35-EZ-K. It's for E-Z Lube spindles that have a grease zerk. If your spindles don't have the grease zerk use # AKHD-545-35-K with Bearing Buddy # BB1980A instead.

The hubs have a 5 on 4-1/2 bolt pattern and use inner bearing # L68149 and outer bearing # L44649. If these bearings or bolt pattern aren't what you currently have then the hubs are incorrect. In which case let me know what you do have and I'll recommend the correct parts for you.

expert reply by:
0
Jameson C
Ask The Experts a Question >>

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>