Recommendation For Flat Towing A 2004 Honda CRV

Updated 02/13/2018 | Published 02/12/2018

Products Featured in This Question

Roadmaster Direct-Connect Base Plate Kit - Removable Arms

(3327)

$575.00

Roadmaster Tracker Tow Bar - Coupler Style for 2" Ball - 5,000 lbs

(81)

$335.00

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3187)

$175.28

Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs

(402)

$850.00

RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs

(656)

$71.13

Roadmaster Brake-Lite Relay Kit for Towed Vehicles

(702)

$47.74

Roadmaster FuseMaster Fuse Bypass Switch for Towed Vehicles - 20-Amp ATM Mini-Fuse

(357)

$83.93

Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional

(755)

$1175.00

Universal Magnetic Tow Lights - Red LEDs - 20' Wiring Harness with 4-Way Flat Trailer Connector

(200)

$64.38

Question:

What do I need without spending an arm and a leg for flat towing a 2004 Honda CRV? Thank You

asked by: Ron M

Expert Reply:

I certainly understand your desire to keep the cost to flat tow your 2004 Honda CRV as low as possible. Unfortunately, flat towing any vehicle requires a lot of parts which makes flat towing fairly expensive. What I am recommending is not the most inexpensive way to flat tow but it is the most effective at a reasonable price.

To flat tow your 2004 Honda CRV, you will need base plates, a tow bar, safety cables, wiring, a braking system, and maybe a high-low hitch adapter.

For base plates, I recommend Roadmaster MX Base Plate Kit, Item # 1541-5, which has removable arms.

For a tow bar and safety cables, I recommend the Roadmaster Falcon 2 Tow Bar, Item # RM-520. A more basic and economical tow bar to consider is the Roadmaster Tracker Tow Bar, Item # RM-020. Great safety cables are Roadmaster Coiled Safety Cables, Item # RM-643.

For an economical lighting option, I recommend using a removable tail light kit like the Magnetic LED Tow Lights, Item # TLL21RK. If you would prefer the convenience of a one-time setup that is easy to use, I recommend the Roadmaster Diode Wiring Kit Item # RM-15267 that will use your vehicle's tail lights and also includes 7-wire to 6-wire coiled electrical cord.

Most states require a supplemental braking system on the vehicle being flat towed. I recommend the Stay-In-Play Braking System, Item # SM99251, because it is a great proportional braking system that has a convenient one time set-up. If you go with the diode setup for lighting then you will also need a brake light relay like Item # RM-88400 that will be required to use a supplemental braking system.

A high-low hitch adapter may also be needed to keep your tow bar level while flat towing your Civic. A "safe zone" of 3 inches above or 3 inches below level must be maintained while towing a vehicle. High-low adapters provide necessary rise or drop to get into the "safe zone". I have attached a link to our available selections.

Before towing, check your vehicle owner's manual for directions on how to properly and safely flat tow your 2004 Honda CRV.

I have attached additional information and videos about flat towing your Honda CRV for you to checkout.