Can Dot 5 Brake Fluid Be Used with Rebuilt Kodiak 225 Brake Calipers?
Published 12/22/2017
Products Featured in This Question
Question:
I’m looking to rebuild my boat trailer Kodiak 225 brake calipers. I would like to use silicone base dot 5 brake fluid. Is there any issue with doing so? Thank You
asked by: Dennis A
Expert Reply:
The Kodiak Disc Brake Caliper 3,500 lbs to 6,000 lbs # KDBC225S and similar finishes will require the Kodiak Disc Brake Caliper Rebuild Kit for 3,500 lb to 6,000 lb Trailer Brakes # KDBC225KIT which will give you all the seals, bolts, bushings, and piston needed. Once rebuilt the system can use Dot 5 brake fluid but only after removing all previous fluid and flushing the system. Dot 5 is not compatible with Dot 3 or 4 so a complete flush or new parts are required.
I also recommend using the ceramic brake pads # K225CP or the stainless steel backing plate pads # K225CPSS.
Product Page this Question was Asked From
Kodiak Disc Brake Caliper Rebuild Kit for 3,500 lb to 6,000 lb Trailer Brakes
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- 3500 lbs
- 6000 lbs
- Caliper Parts
- Rebuild Kit
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: kodiak brake lines
- Video: Review of Kodiak Disc Brake Caliper Rebuild Kit - KDBC225KIT
- Q&A: Orientation of Dust Boot Seal for Kodiak Disc Brake Caliper Rebuild Kit
- Shop: Kodiak Disc Brake Caliper Rebuild Kit for 3,500 lb to 6,000 lb Trailer Brakes
- Shop: Replacement Master Cylinder Repair Kit for Model 80LP/85LP Disc Brake Surge Actuators
- Q&A: Diagram to Use for Installing Kodiak Caliper Rebuild kit # KDBC225KIT
- Q&A: Correct Replacement Guide Bolts for Kodiak Disc Brake Kit
- Q&A: Installing Rubber Sleeve Bushings from Kodiak Disc Brake Caliper Rebuild Kit
- Q&A: Kodiak Disc Brake 225 Caliper Rebuild Kit
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Shop: Caliper Rebuild Kit for AL-KO/Hayes Disc Brakes - 10,000 lbs and 12,000 lbs
- Shop: Replacement Rubber Piston Seal for Kodiak Disc Brake Calipers - 3,500 lbs to 6,000 lbs
- Shop: Replacement Rubber Bushing for Kodiak Guide Bolt Sleeve - ABS Compatible - 2,000 lbs - 8,000 lbs
- Video: Review of the Kodiak Hydraulic Brake Hose
- Shop: Kodiak Hydraulic Brake Hose - 3/16" Male Fittings w/ Stainless Flares - 1/8" ID - 3.5'
- Shop: Trailer Hitch
- Shop: Bumpers
- Q&A: What Type of Brake Fluid to Use with Kodiak Brake Assemblies
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Search Results: trailer wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Video: How to Choose a Trailer Brake Controller
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
on Accessories and Parts
