Slightly Larger Version of the Atwood Drill Adapter # AT85385

Question

Question:

I have a very old 1974 Swiss Colony fifth wheel camper that I purchased this part for and it looks like my existing crank is about the size of a 3/4inch conduit. The new one will not fit onto the shaft. Do you have a larger one ?

asked by: Mike G

1

Helpful Expert Reply:

We do have the # UF48-979071 which is slightly larger than the Atwood part # AT85385. The Atwood has an opening of .53 inches whereas the Ultra Fab is .66 inch.

See attached picture.

expert reply by: Jameson C

1

click to enlarge

Answer 1

Hello John, sorry to hear the drill adapter is not working for you. Our records show your Atwood MPD 86065 electric jacks would use a drill adapter that is 0.53" in diameter. The #UF48-979071 adapter is more like 0.66" so too big. We used…

view full answer...

Answer 2

Hey James, thanks for reaching out. Yes I can provide dimensions for the crank handles we carry. Two common ones are the Lippert #LC119226 and the Ram #RVLG-HDL. I have included a picture that shows dimensions of both. Hopefully one of these match…

view full answer...

Answer 3

The Atwood manual crank you referenced we no longer carry. The Replacement Crank Handle for Stromberg Carlson Landing Gear #LG-119226 is the manual crank we have that will work for your Atwood Electric Jack. This is a much longer option which would…

view full answer...

Answer 4

Our customers have told us that the #LG-119226 Replacement Crank Handle works with most Atwood landing gear. I've linked to a product description video featuring the replacement handle. I've also provided a close-up photo showing what the end…

view full answer...

Answer 5

Hey Daryl, I checked with Weigh Safe and the Flap Jacks like the part #WS88ER are not designed to be stacked. Are you in need of something 10 inches tall?

view full answer...

Answer 6

Hey Charles, thanks for reaching out! For extenders we have the 6" Lift Extenders #LC182495 and then for the manual crank we have one with a 4" Long Shaft #LC182436 or an 8" Long Shaft #LC1824362 for your application. We don't have…

view full answer...

Answer 7

Hello John, There isn’t a specific weight rating listed for the Replacement Crank Extension for Lippert Spare Tire Winch Assemblies - 35-1/2" #LC1315411. However, most Lippert spare tire winches are rated to handle 100 lbs or more, which is more…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

Load range D has a capacity of 1,220 lbs at 65 psi, whereas load range E has a capacity of 1,520 lbs at 80 psi. Basically the only difference between the two is the weight capacity. With trailer tires you always want to have them inflated to their…

view full answer...

Answer 10

Hey Terry, the Air Distribution Box for Dometic FreshJet 3 RV Air Conditioners #DMC79ZR that you referenced doe have a thermostat built into it but it was designed for ductless setups and not ducted.

view full answer...

Slightly Larger Version of the Atwood Drill Adapter # AT85385

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching