To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These tie-downs bolt directly to your truck’s frame—the strongest part of the vehicle—to keep your camper stable and your ride comfortable. By distributing weight evenly and lowering the center of gravity, they prevent sway and keep handling predictable even on long highway runs or uneven backroads. That solid frame connection means no top-heavy feel, no shifting, and no stress on the bed or bumper.
Each bracket uses pre-existing holes in the frame for a bolt-on fit, so there’s little to no drilling and no need for cutting or permanent modifications. The tight mount sits close to the frame with minimal loss of ground clearance. It’s a straightforward DIY project with just basic tools—simple, clean, and ready for the road without extra fabrication.
Once your trip’s over, remove the tie-down arms and they practically disappear. The brackets tuck up under the truck and stay out of sight so your rig keeps its clean look. When you’re ready to load up again, just slide the arms back in place and you’re good to go.

Made of steel with a high-impact powder coat finish, these tie-downs are built to handle years of use through rain, road salt, and rough terrain. The durable coating adds an extra layer of protection against corrosion and wear, keeping your gear solid trip after trip.
Each set includes two front and two rear tie-downs plus installation hardware. The adjustable arms offer two pin holes so you can fine-tune how far they extend—perfect for clearing sidewalls or fenders while keeping turnbuckles at the right angle. Pair them with a set of turnbuckles (sold separately) to lock in your camper from multiple points for secure, balanced tension every time.


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
etrailer.com: Today we going to take a look at the Torklift Custom Rear Frame-Mounted Camper Tie-Downs.Now, these are a custom-fit part. They are designed to fit the 2019 Chevrolet Silverado and GMC Sierra 1500 trucks, with either the 5-1/2 ft bed or the 6-1/2 ft bed, without the board/the step that's underneath the truck bed and with the factory installed hitch. Now, on a custom-fit part like this, I always like to recommend for you to go to our website, use the fit guide, put in your year and model vehicle, and it'll show if this'll work for your application.Now, these tie-downs is what will provide the attachment points at the rear of your truck for securing your Bed Mounted Camper to your vehicle. This will let you feel dramatic improvement with the vehicle handling and stability, and it is the safest way to haul a truck camper. Prevents any vehicle swaying, camper movement in all directions. Now this will allow you to haul your truck camper confidently by attaching your tie-downs to the strongest part of the truck, which is the frame.The vehicle manufacturer does recommend that all full heights sliding camper bodies should be directly attached to the vehicle frame structure.
The frame mounted design ensures excellent handling by securing the camper to the truck's base instead of its bed, which will better distribute the weight to help keep your setup from being too top-heavy. It'll also help avoid any bed or bumper damage that's common with other tie-down systems. This is a fast no-drill installation securing your truck camper to your truck. You can maintain the value of your truck and prevent rust and bed damage by avoiding drilling into your truck bed or bumper. As I mentioned, it is custom-fit for your vehicle.
The brackets fit tight to the truck frame, so there's no loss of any ground clearance. Perfect for any off-road truck camping.When they're not being used, you can take out these inserts and they're virtually undetectable. All this is underneath the truck, you can't even see it. The hidden design of the brackets will return it to your original look. Also, on the inserts themselves...
Basically, the inserts if you take your snapper pin out. This is the insert that goes in here. This is all mounted onto your truck bed. You can't even see it. Then this insert...
This is where your turnbuckles will attach to. If you notice on the insert, there's two holes at different lengths, and this'll allow you to connect your turnbuckles and not interfere with anything on your vehicle.So, in other words, when you go to insert this, you can either put it in the first hole and that'll let it stick out a little bit further, or you can bring it down to the second hole and that'll bring it closer to the truck. Then once you find the right position, then you just snap the pin in and it will hold it into place, and your turnbuckles will attach right to there.Now, these are driver's side and passenger side brackets. When you do put your insert on, you do want to make sure that the shorter side - this part right here - will always face the rear truck. So, this being on the driver's side, that'll face through the truck. When you mount this on the passenger side, that'll face the rear of the truck.These are steel construction. They have a nice black powder coat finish for durability. It does include everything shown here: the two rear tie-down inserts, the two frame brackets, all the necessary hardware. Now, we've bolted these together just to show what they look like when they're installed, so all that hardware comes with it. Nice set of detailed instructions on how everything's put together and how it operates. They even have a couple of stickers that you can attach to the inserts to show you passenger's rear, driver's rear, to know which inserts what. These parts are made in the U.S.A.But that should do it for the review on the Torklift Custom Rear Frame-Mounted Camper Tie-Downs..
Ratings & Reviews

Lazer S.
9/16/2025
It definitely is safe the way you have them, Paul! In a perfect world, the turn buckles would be perfect vertical, but this an imperfect world and not all campers have the attachment points in the same place. If you take a look at some of the installed pictures on the TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK page, you can see most of them are at an angle. It's perfectly normal. Are you running any suspension enhancement on your Silverado?

Paul
9/27/2026
These tie downs are great, so easy to use. Camper never budged a hair


Bob
11/1/2025
I have not had any issues at all with the tie downs.

Kate F.
8/10/2026
Thanks for the pictures Rich. We will be reaching out =)

Heather A.
4/10/2026
Looks great! What kind of camper do you have?

Lazer S.
10/14/2025
Install looks great, Megan! Especially for it only taking two hours! They were moving. : ) Happy we confirmed what you found as well. Tie downs can be a pain in the rear with all the options out there. Now I do have to ask though, have you guys thought about any kind of suspension enhancement for the rear axle? It's a little hard to tell, but it looks like the back is sagging a bit in your last picture.



Clay
7/31/2026
A year later and I would not do anything different. Absolutely the best system available especially paired with the fast guns. The camper is solid mounted and does not move. Yet can still be off loaded in just a few minutes. Remember good stuff isn’t cheap and cheap stuff isn’t good.


Nick S.
1/12/2026
I love these TorkLift tie downs, and it is great to hear you are liking the quality as well. What kind of truck camper are you going to be running with these?

Kate F.
8/20/2026
We appreciate the kind words Charles! Where did you take the in-bed camper for the first trip?
Do you have a question about this Truck Camper Tie Down?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Straw
8/24/2026
A year later, no issues with tie downs, except normal wear and tear and metal to metal wearrust progression. These tiedowns are designed great and fit function was clearly created by someone who knows not only design but install ! E-trailer is “the” place to buy rv, camper, towing etc products - the install videos are sooooo helpful ! Thx ET !