Product Experts Available Now!
Call 1-800-940-8924
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
(2237 reviews)
Price: $387.71
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Part Number: TLF3008
In Stock
$387.71
Retail:$447.48
You Save: $59.77
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (2237)
- Q & A (0)
- Photos
- Used (1)
TorkLift Truck Camper Tie Downs - TLF3008
Highlights
- Stable Camper Handling: Frame mounts spread the camper’s weight evenly and lower the center of gravity for a smoother, safer ride.
- Damage-Free Install: Bolts to existing frame holes with little to no drilling or truck modification.
- Clean Look When Not in Use: Removable arms keep brackets nearly invisible under the truck.
- Strong, Corrosion-Resistant Build: Black powder coated steel stands up to road salt and rough travel.
- Full Rear Mounting Kit: Includes 2 rear tie-downs with installation hardware for a secure setup.
Features to know about
Stable Handling on Long Trips: Frame-Mounted Tie-Downs
These rear tie-downs attach directly to the truck’s frame—the most solid part of the vehicle—to keep your camper steady mile after mile. By anchoring at the frame instead of the bed or bumper, they spread the camper’s weight evenly and lower its center of gravity. That means a more stable ride, less sway in crosswinds, and confident handling whether you’re heading down the highway or through rough backroads.
Built for a Custom Fit Installation
The TorkLift TLF3008 tie-downs bolt into pre-existing holes in the frame, so there’s little to no drilling and no need for major modifications. Each set is custom-fit for your truck model, ensuring the right mounting points and tight clearances. Once installed, the arms extend from the body to clear fenders or sidewalls, giving you an easy reach for turnbuckles and a perfect angle for a secure hold.
Clean Look When Not in Use: Removable Arms
When you’re not hauling your camper, you can remove the tie-down arms from their brackets to keep your truck looking clean. The brackets tuck up flush with the underside of the frame, staying nearly invisible until you need them again. It’s a setup that does its job when you’re loaded and disappears when you’re not.
Built Tough for Real-World Use: Powder-Coated Steel Construction
Constructed from black powder-coated steel, these tie-downs are built to resist rust and corrosion through years of use and exposure. The durable finish holds up to road salt and weather, so they stay strong and dependable season after season. Each kit includes two rear tie-downs and installation hardware for a sturdy mount that’s ready for serious travel.
Secure Connection Points: Adjustable Anchors for Turnbuckles
Each arm has two pin holes so you can set how far it extends from the truck body. This flexibility helps align your turnbuckles (sold separately) without them rubbing against the truck or camper sidewalls. Two anchor holes let you find the right angle to hold your camper firmly in place from multiple directions, helping prevent shifting while you’re on the move.
Specs
Construction
- Material: Black powder coated steel
- Corrosion Resistance: Powder coated finish
- Mount Type: Frame-mounted
- Fit Type: Custom fit
- Mounting Location: Rear
- Country of Origin: Made in the USA
Installation
- Installation Method: Uses pre-existing holes in the frame
- Drilling Required: Little to no drilling required
- Hardware: Includes installation hardware
- Ground Clearance: Minimal loss of ground clearance
Functionality
- Attachment: Creates attachment points for securing camper to truck bed
- Compatibility: Pairs with front tie-downs (sold separately)
- Connection: Requires turnbuckles (sold separately) to attach camper to tie-downs
- Anchor Options: Two anchor holes for adjustable angle and secure hold
- Adjustability: Extendable arms for clearance around bowed sidewalls and fenders
- Visibility: Remains virtually invisible beneath vehicle when arms are removed
- Performance: Distributes camper weight evenly and lowers center of gravity
- Quantity Included: Includes 2 rear tie-downs
- Warranty: Lifetime warranty
F3008 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
This Product Fits The Following Vehicles
- 2019 - 2027 Ford F-250 Super Duty 6-3/4 Foot Bed - factory hitch
- 2019 - 2022 Ford F-250 Super Duty 6-3/4 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
- 2017 - 2027 Ford F-250 Super Duty 8 Foot Bed - factory hitch
- 2019 - 2027 Ford F-350 Super Duty 6-3/4 Foot Bed - factory hitch
- 2019 - 2022 Ford F-350 Super Duty 6-3/4 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
- 2017 - 2027 Ford F-350 Super Duty 8 Foot Bed - factory hitch
- 2017 - 2028 Ford F-450 Super Duty 8 Foot Bed - factory hitch
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
- Did not arrive in time
Ratings & Reviews
4.7
2237 reviews
by:
Mark
06/05/2024
These tiedowns were exactly as advertised and fit my 2023 f350 4wd crew cab perfectly using preexisting holes and mounts. They even came with wire feeders to feed the bolts through the holes on the frame. Instructions were very good and easy to follow. Can adjust the width of tie down and can also drill new holes to customize the width. I highly recommend these.
by:
Seth
10/23/2026
Would be 5-star if packaged properly to protect the paint from getting beat up in transport. The product itself is great and fits perfectly. Easy to install.
by:
Christopher
12/18/2024
I have been very happy with these tie-downs. They are VERY easy to install, require no drilling or modification to the hitch and hide away nicely when the inserts are removed. ~9,000 miles with our camper so far and no issues. These are on a 23 F250 PowerStroke short bed.
Brooke M.
12/18/2024
Yay! Thats what we want to hear! Where all did you get to go in those 9,000 miles?
by:
Keith
09/05/2022
The package arrived very quickly and intact. I have a 2020 Ford F250 SD Lariat short bed with a factory hitch. The tie-downs were really easy to install although the hitch adapter plate (see attached photo) which is supposed to attach to the end of the tie-down would not fit inside the tubing on my factory installed hitch so I installed without it and it is tight and snug
Heather A.
10/12/2022
Thank you for your photo. Torklift does recommend to use the hitch adapter for the 2020 Ford F-250. The adapter does need to be turn horizontally to fit inside the hitch not vertically.
by:
Kevin
03/19/2026
Easy to install on 2020 F350. I did not need the adapter for the receiver on this truck. Communication with etrailer was good
by:
Thomas
01/08/2026
The supplied 2 1/2" factory REC hitch adapter plat needed grinding for it to fit in the receiver hitch. Once I did that it was easy to install and definitely a well built tiedown.
by:
Gray
05/22/2024
I bought both the front and rear tie-downs for my old Lance truck camper on a 2023 Ford F-250. Once installed they work great; very heavy duty. But the thing I liked most was the detailed instructions for installation. Everything needed came with the tie-downs and they were perfectly fitted to my F-250. All I needed was my old torque wrench. Installation probably took less than 2 hours.
Gray
5/23/2025
They continue to work well. One additional feature I like is that the outer part of each tie down slips out and is removable. So, during the winter when I have the camper off the truck I am not banging into them with my legs when moving around the truck.
by:
Jason
11/01/2020
Installed on 2020 F250 Superduty. Easy to install rear tie downs only took about 45 minutes. I love the fact there is no drilling or moving existing things. Just straight bolt on and seem to be rock solid.
by:
Keith
09/10/2026
Looks great, time will tell if the paint holds up
by:
Mark
03/15/2026
Easy installation, great look. Definitely worth the money
by:
Brett P.
07/22/2017
We couldn't be happier with the Torklift Camper Tiedowns. Install time was minimal and fit and finish couldn't be better. Bolt fishing the frame on the passenger-side of a 2017 F350, is slightly different than the instructions suggest. But, you can't blame Torklift for not being able to keep up with every Ford engineer who gets a wild hair, to slot a new hole in the frame on Friday @ beer-thirty. Thanks again, etrailer. Ordering was a breeze, the package tracker was awesome and communication was excellent.
by:
Cavers,
01/07/2020
Went together easily, perfect fit.
Have used the manufactures other products and they are excellent products.
Have used the manufactures other products and they are excellent products.
Cavers,bryan
1/8/2021
very good,just 1 bolt to remove from RUSTING until needed again
by:
Matthew
05/14/2025
Exactly as described in the e-trailer video. Installation was easy since I previously watched the video. Shipping was faster than originally estimated. This is my 3rd purchase, and Would recommend the product and e-trailer to anyone in need of trailer related parts or components. Price was the same as other retailers and lower than others
by:
M Turner
05/01/2022
Easy install on a 2017 Ford F-350 Lariat w/ factory hitch.
by:
Nathaniel
04/27/2025
Ordered the wrong part initially. Called Amy J and she got me taken care of right away. Incredible A+ customer service.
Pro tip: call before ordering and they can make sure you’re getting what you need.
Pro tip: call before ordering and they can make sure you’re getting what you need.
Brooke M.
4/29/2025
Yes! Please never hesitate to reach out - we are here to help! Also glad you got Amy on the line. She knows her stuff! I'll be sure to pass along this review to her :)
by:
Ronald
04/13/2021
This installation was easy. If installation is on F250, the additional notched plates must be attached to the tie-downs. This prevents rotation inside the receiver tube. A couple of ratchet extensions will be required to hold the bolt head. The finished installation is secure and looks good. The welding appearance could be better, but seems strong enough.
Ronald
4/14/2022
The tie downs are still secure and work great. These rear tie downs will get alot of road grime and mud, so keep them clean.
by:
Max
04/20/2019
I've had these installed about a year now. Have been on trips from Missouri to California and back and another trip to Wyoming/Colorado.New Mexico and back.
Tie downs worked as expected. The installation isn't too bad, having someone to help makes the installation easier.
The one thing that could be better is that you have to fish bolts thru the frame to install these -- that wasn't too bad but I'm not sure how you would ever get them back out to move to another vehicle. I trade pickups every few years and would want to move them from one to the other.
I guess I'll cross that bridge when the time comes.
Tie downs worked as expected. The installation isn't too bad, having someone to help makes the installation easier.
The one thing that could be better is that you have to fish bolts thru the frame to install these -- that wasn't too bad but I'm not sure how you would ever get them back out to move to another vehicle. I trade pickups every few years and would want to move them from one to the other.
I guess I'll cross that bridge when the time comes.
Max
5/12/2020
Ok its been another year. The tiedowns are still working great. I did sell 2018 F250 and managed to fish the bolts back thru the frame. A couple of them I had to cut a slot into the end of the bolt to hold it with a screw driver while loosening the nut. It would be helpful if the threaded end had a slot or smaller head on it for a wrench. I just bought a 2020 F350 Dually that these will go back on in a few weeks.
by:
Richard
11/24/2021
The Package arrived on time and all was correct. It was easy to track the order through the shipping process, I found the staff easy to work with and they appeared to be genuinely interested in providing good service.
Rick B.
11/25/2022
Torklift tiedowns are working great, great fit, no problems with install.
by:
Linda
07/18/2025
I received twice the wrong equipment. Each representative assured me that they were ordering the correct equipment for my vehicle. I will no longer be using etrailer. And I will make sure other people know what has occurred regarding my experience.
by:
Kyle
03/18/2025
The Tie Downs work as they should but i would expect better paint for how much they cost. Plan ahead and paint these before installing on your vehicle or they will be completely rusted in less than a year. TorkLift you can do better.
by:
Rick
11/14/2020
Tie down was exactly what I needed for a 2020 F250 as etrailer match/ search engines determined. Tie down was delivered promptly as promised.
Rick
11/14/2021
A year later: Im frustrated with the rattling noise in these rear tie downs. I clunks and rattles right through frame and into the cab. Ive tried shimming, packing, and tightening the fast gun turnbuckles helps a little but cant make the noise go away.... Id lower my rating but dont see how on this update...
Heather A.
11/20/2021
Thank you for your follow up. It sounds like you need an adapter for the F-250 hitch to take up the extra space in the hitch receiver. It did come with the tie downs. If you don't have the adapter and hardware any longer, I can have Torklift give you a call.
by:
Clinton
06/19/2020
One year later and our TorkLift Frame-Mounted Truck Camper Tie-Downs are holding up extremely well. In fact they look brand new even though we have used them a lot! We have put thousands of miles on our truck while hauling our truck camper and our tie-downs did an excellent job of making our camper secure. We have had zero problems and we would recommend them to anyone.
by:
Ken C
01/28/2020
I have had both the front and rear tie downs installed on my F-250 Super duty with an Eagle cap 950 truck camper. These are the only way to go. Being attached to the frame it feels a part of the truck itself and and it is so much safer than any bed mounted tie downs. I have taken the camper off road and the stability is no problem due to being tied to the frame itself. If you want piece of mind for your camper travels, invest in these.
by:
Clinton
05/25/2018
I bought this and the companion tie down for Ford F250 truck and the Northstar Laredo truck camper. I traveled 12K miles without incident. They worked perfectly. The only thing I had to do was to shorten the pieces that slip in (removable) for this combination they were a little too long and the Fastguns would rub the jacks in the front. I shorted the rears as well.
by:
Michael
07/29/2021
I would recommend these to anyone tying down a camper on a pickup. Bolts directly to frame and makes load ride so much better than other types of tie downs. Takes a little video time to get the mounting down but it’s included on their website and after completing one the others are easier. Very happy with purchase
25
2237
true
Show More Reviews
See what our Experts say about this TorkLift Truck Camper Tie Downs
- Truck Bed Camper Tie Downs For A 2020 Ford F250 With Short Bed, Running Boards, And Factory HitchHi Mark! For your 2020 Ford F250 with the 6-3/4 bed, running boards, and factory hitch, you are going to want the following two options: TorkLift Camper Tie-Downs - Custom Frame Mount - Front # TL77CR TorkLift Camper Tie-Downs - Custom Frame Mount - Rear # TLF3008 These will also fit whether you have the SuperCrew or SuperCab, 4X2 or 4X4, gas or diesel, and if the running boards are cab length or full length. I'm not sure why they aren't currently listed for your truck on our site, but...
view full answer... - TorkLift Tie-Down Fitment for a 2024 Ford F-350 Super Duty 6-3/4' BedHey Terry, thanks for reaching out! The front tie-down for your 2024 Ford F-350 Super Duty is the TorkLift # TL77CR, and then for the rear position it all depends on the configuration of the back of your truck: - Tie-Down # TLF3008 fits if you have a factory installed hitch - Tie-Down # TLR3500 fits if you have a non-Torklift aftermarket hitch - Tie-Down # TLR3504 fits if you have a Torklift SuperHitch Magnum 30k hitch You'll also want to pick up some turnbuckles like the TorkLift...
view full answer... - Recommended HappiJac Qwik-Load Turnbuckles for a In Bed CamperHey Reid, thanks for the information. I recommend the HappiJac Qwik-Load Turnbuckles item # LC182895. This set of four stainless steel turnbuckles provide a fast, lever action system to securely tie down your camper. They have quick release handles for easy installation, a rust proof stainless steel design, and built in tension mechanisms that absorb stress at the anchor points. The front turnbuckles with the item # LC182895 have a 16-1/2" to 23-1/2" reach range. The rear ones have a 22-1/2"...
view full answer... - Camper Tie Downs for 1997 Ford F350Hi K, Thanks for your question. The TorkLift Tie Downs # TL87CR and # TLF3008 are not compatible with your 1997 Ford F-350. Those kits are designed for 2019 and newer Ford trucks. To determine the correct TorkLift tie-down kit for your truck, I'll need a little more information about your setup: Bed length: 6-1/2' or 8' Running boards: None, cab-length, or wheel-to-wheel Rear hitch: Is it a TorkLift SuperHitch or a non-TorkLift aftermarket hitch? For example, the TorkLift Custom Frame-Mounted...
view full answer... - Correct Torklift Turnbuckles For A 2020 Ford F-350 6.75' Bed SupercabHello Joe. I can definitely help get you set up with Torklift Camper Tie Downs for your 2020 Ford F350. Does your truck have a trailer hitch installed on the back? If so, was it installed from the factory or aftermarket? Let me know because that will determine the correct rear tie downs. The # TLF2022 front tie downs will be correct for your truck. The rear tie downs will be determined by the type of trailer hitch on your truck. The # TLR3500 are for trucks with a non-Torklift brand aftermarket...
view full answer... - Will TorkLift Camper Tie-Downs TLF2021 Interfere With Backup Sensors on 2017 Ford F-350We have not seen any problems at all with interference with the backup assist on a 2017 Ford F-350 Super Duty after installing the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF2021.
view full answer... - Does The Built-In Bed Step Affect Fitment Of Camper Tie-Downs On A 2023 Ford F-350 Dually I spoke with TorkLift and confirmed that the steps built into the bed of your 2023 Ford F-350 dually will not interfere with the fitment of your camper tie-downs. According to TorkLift's fitment guide the correct tie-downs for your truck are the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2021 and rear # TLF3008. To complete the setup you'll need some turnbuckles like the TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs # TLS9020.
view full answer... - What Tie Downs Do I Need For My 2020 Ford F350 With Steps That End At The Cab?Hey David, I reached out to TorkLift for confirmation since our websites show different information. The parts that you need for your vehicle are the front tie does # TL77CR and the rear tie downs # TLF3008. Those are the correct fit for your vehicle, TorkLift had the information correct. While we get ours updated that is what you need to get set up for that truck bed camper. What kind of truck bed camper do you have?
view full answer... - Camper Tiedowns For A 2019 Ford F-350 With 8' Bed And Factory HitchHi Randy! We do have TorkLift tiedowns available for your 2019 Ford F-350 with the 8 foot bed and factory hitch. You didn't mention if you had running boards, but these will actually fit all three options (no boards, cab length boards, or full length boards). Just be aware that it is required that full length running boards are either removed or will need to be modified for the front pair. Here are the parts you are looking for though: TorkLift Camper Tie-Downs - Custom Frame Mount -...
view full answer... - Recommended Camper Tie Downs for a 2023 Ford F-250 Regular Cab With 8' BedHey Robert, sorry it can be a bit confusing navigating all those facets for the camper tie downs, but I did go ahead and find those tie downs you were looking for. For the front, you'll want the TorkLift Camper Tie-Downs # TL87CR (TorkLift P/N F2032), and for the rear you'll want the TorkLift Camper Tie-Downs # TLF3008 (TorkLift P/N F3008). In addition to the tie downs, you're also going to need a set of turnbuckles # TLS9529-2-LK to secure your camper to the vehicle.
view full answer... - Torklift Camper Tie Down Recommendation for 2019 Ford F-350 Diesel, SuperCrew, Cab Length BoardsYes, I checked with Torklift and the front Torklift Tie Downs part # TLF2022 that you referenced are a confirmed fit for your 2019 Ford F-350 short bed, diesel, super crew, with cab length running boards. The rear set you need then is the part # TLF3008. For turnbuckles to go from the tie down to the camper we then have the part # TLS9050A which are stainless steel and would work great.
view full answer... - Instructions for SuperHitch 1102Hey Frank, we don't have an online version we can send because Torklift is really protective of them and doesn't like to put out electronic versions. I know, seems pretty odd.. but this does come with them so you wouldn't be attempting to install it without a guide.
view full answer... - TorkLift Tie-Downs and Turnbuckle Needed for a 2024 Ford F-350 Super DutyHey Jerry, thanks for reaching out! The rear TorkLift Tie-Downs # TLF3008 you're using for your 2021 F-350 can potentially work for your 2024 F-350 but I'll need to know if you have a rear board/step and what kind of hitch receiver you have at the back of your truck as well (if any). These tie-downs are pretty specific when they come to their fits but with that information we'll be able to get you setup with your new truck. Once we know what parts you need we can look at the instructions...
view full answer... - Torklift Tie Down Recommendation for 2017 Ford F-350 Short Bed with Factory HitchFor your 2017 Ford F-350 with factory hitch, running boards that stop at the cab and a short bed you would want the Torklift Camper Tie Downs part # TLF2022 and # TLF3008 which are a confirmed fit for that setup and would work well.
view full answer... - Torklift Camper Tie Down Recommendation for 2018 Ford F-250 6-3/4 foot BedThe Torklift tie down part # TLF2022 have been carried over to fit 2018 Ford F-250 Super Duty trucks. There are several variations of the truck that these are fit for, but in general it's versions of the vehicle without step boards, 6-3/4 foot bed. The part # TLF3008 is the matching rear tie down for the same options I listed previously.
view full answer... - Weight Difference Between Steel and Aluminum TorkLift Tie-Downs for 2024 Ford F-350Hello John, I have listed the different Torklift tie-downs, along with their weights, for your 2024 Ford F-350 below based on you looking at the # TL87DR. Both are designed to fit the 8' bed with a factory hitch or Torklift SuperHitch Magnum. The aluminum will not fit if you have a non-Torklift aftermarket hitch. -TorkLift Talon Camper Tie-Downs - Custom Frame Mount - Aluminum - Front # TL36CR (36 lbs) -TorkLift Talon Camper Tie-Downs - Custom Frame Mount - Aluminum - Rear # TLF3008A...
view full answer... - Recommended TorkLift Talon Camper Tie-Downs for a 2025 Ford F-350 w/ a 6-3/4' Bed Hey Keith! The TorkLift Talon Truck Camper Tie-Downs item # TL25SV combo will fit your 2025 Ford F-350 if your truck has the TorkLift SuperHitch Magnum 30k item # TL27CR installed. If you have the factory hitch or an aftermarket hitch you'll need one of the options listed below along with the Front Tie Downs- TorkLift Talon Camper Tie-Downs item # TL65MV. Rear Tie Downs - Non-TorkLift After-market Hitch item # TLR3500 Rear Tie Downs - Factory Hitch item # TLF3008 If you have any additional...
view full answer... - Recommended TorkLift Tie Downs for a 2025 Ford F-250 w/ a 6 3/4" BedHey David thanks for the information! For a 2025 Ford F-250 with a 6 3/4" bed, you'll want the TorkLift Tie Downs - Custom Frame Mount - Front and Rear item # TL63PR. This kit comes with the Front TorkLift Camper Tie-Downs item # TL77CR and the Rear item # TLF3008.
view full answer... - Is Torklift Tie Down Part Number # TL54VV a Front or Rear Set of Tie DownsHey Kyle, sorry for the confusion but the Torklift part number # TL54VV is a kitted part number that includes a front and rear set of tie downs. What it comes with is the tie downs part number # TLF3008 and # TLF2021.
view full answer... - Will TorkLift Camper Tie-Downs From A 2017 Ford F-250 Fit A 2023 Ford F-350 Hi Alan, The rear tie downs between the 2017 and 2023 models should be the same but the front (cab side) will be different. Assuming your running boards don't extend under the bed on the 2023 model you'll need the following TorkLift camper tie-downs: Front: Steel # TL87CR (F2032) Aluminum # TL36CR (F2032A) Rear: Steel # TLF3008 (F3008A) Aluminum # TLF3008A (F3008A)
view full answer... - Recommended Camper Tie Downs and Turnbuckles for a 2024 Ford F-350Levi, for your 2024 Ford F-350 you can use the TorkLift Camper Tie-Downs # TL77CR for the front and # TLF3008 for the rear. These are custom frame mounted tie downs that will bolt right up to your frame, and includes all the mounting hardware for install. The last thing you'd need is a set of turnbuckles # TLS9050A to secure your camper to the tie downs.
view full answer... - Recommended Camper Tie Downs and Turnbuckles for a 2023 Ford F-350 TremorHey Cory, for your 2023 Ford F-350 Super Duty you can use the TorkLift Camper Tie-Downs # TL77CR for the front and the TorkLift Camper Tie-Downs # TLF3008 for the rear. These tie downs will work fine with a 3,000 lb camper, are frame mounted, and includes the mounting hardware needed for install. To complete your setup with the tie downs you are also going to need a set of turnbuckles # TLS9529-2-LK.
view full answer... - TorkLift Tie-Downs For a 2019 Ford F-350 Crew Cab Long Bed With Factory ReceiverOf course Ray. You are going to need the Front Tie-Downs # TL87CR and Rear Tie-Downs # TLF3008. Our part numbers can get confusing as they do not always match the manufacturers part numbers. I recommend using the TorkLift FastGun Turnbuckles # TLS9529-2-LK to secure your camper to the tie-downs.
view full answer... - Install Video for Torklift Camper Tie Down TLF2021The best resource we have would be the install video we have for the # TLF2021 that I attached to this page.
view full answer...
Do you have a question about this Truck Camper Tie Down?
Used Items Available
Condition: Surface Scratches
Notes: Item has minor cosmetic scratches and is missing the (2) F-250 Hitch Adapters. Otherwise unused and still in good condition for its application.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Installed by:
Cole B
Installed by:
David F
Installed by:
Andy C
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Amanda K
Written by:
Amanda M
Test Fit:
Shane H
Test Fit:
Jacob H
Video by:
Jonathan Y
Video by:
Thomas T
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mark
6/6/2025
These tie downs are sill working as advertised. I have travelled over 20,000 mi with them in various conditions with about 10 of that time in dirt roads or 4wd roads. Nothing too crazy, but with my camper and these tied downs I am confident that the camper will remain attached and be secure. It hardly moves around at all. They are worth the money and I can still remember how easily they installedvery welll thought out design and installation!