Ventline RV Vents and Fans BVD0215-00 Review

content loading



Customers compare BVD0215-00 to these similar products




Products Featured in this Video



Review of Ventline Accessories and Parts BVD0215-00


Today we're going to be taking a look at the Replacement Fan Blade for the Ventline Ventadome Trailer Roof Vents. It's going to work great for roof vents on motor homes and enclosed trailers. Again, it does work with Ventline Ventadome models V2094 and V2119, newer models only. The hole or bore diameter, that's the small hole right there. That's going to give us a measurement of 3/32 of an inch. When replacing this, this simply presses on, so it's a press fit installation.

The product's made in the USA. Now this fan blade won't fit older obsolete motors. If you're Ventline roof vent has an older motor, it will have to be replaced along with the fan blade. To determine whether you have an old or new motor, all you need to do is measure the length of the motor from end to end, excluding the shafts and mounting hardware. You'd want to be sure just to measure just the case. If the motor measures 2 in, it's going to be an older motor and should be replaced with the fan blade.

A new motor is going to measure 1 1/2 in in length. The diameter of the fan blade measuring edge-to-edge, that's going to give us a diameter measurement of about 6 in. That's going to do it for today's look at the Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents.


Questions and Comments about this Video

add comment

Info for this part was:

Installed by:
Joe V
Installed by:
Cole B
Video Edited:
Dustin K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.