Brophy Camper Tie Down Recommendation for a 2015 Ford F-250

Question

Question:

Which camper tie down do you recommend for a 2015 f250 long bed? I have a Jayco j=series sportster 8.

asked by: Stephen P

0

Expert Reply:

The Brophy Camper Tie Downs, part # TDSF can be used on campers that have a total length of up to 8 feet in length. The Brophy Camper Tie Downs, part # HSSF can be used on any size campers. There is no weight capacity rating on the camper tie downs and they will work for any camper size that is properly sized for your 2015 Ford F-250.

The Brophy # TDSF mounts into the truck bed stake pocket, where as the Brophy # HSSF tie downs wrap around the bed, not in the stake pockets, and are mounted inside the bed.

Also, Brophy # HSSF will work in trucks with spray-in bed liners. If your truck has a drop-in bed liner, it will need to be trimmed or removed to use part # HSSF.

For either kit you will want to use the Brophy Camper Tie Down Hardware Kit, part # TDHP. This hardware kit will be used to attach the camper to the tie downs.

expert reply by: Jameson C

0

Answer 1

I have a much better solution for you than the part #EM09085 as a camper tie down. The Brophy Camper Tie Downs, part #TDSF, you have referenced are a universal application. The hardware to mount the tie downs to the vehicle are included. These tie…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 7

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 8

Hey Gregory, that's really good information. You’ve got a few options, but I wouldn’t jump straight to replacing the leaf springs on a half-ton for that size trailer. Since you’re using a Curt weight distribution hitch, that should be doing most…

view full answer...

Answer 9

Hey Cass, can you measure the feet of your 2024 StarCraft Super Lite? The SnapPad Mini Jack Pads for Travel Trailers w/ BAL - 5-1/2" Square Jack Feet #SN39FR is designed to fit 5-1/2 inch square feet which might be what you have but I don't…

view full answer...

Answer 10

There is no weight capacity for the Brophy Clamp On Camper Tie-Downs #HSSF. The tie-down hardware kit #TDHP, that is used to secure the camper to the #HSSF tie-downs has a weight capacity of 3,000-lbs. My contact at Brophy said the tie-downs will…

view full answer...

Answer 11

You can use the Brophy Clamp On Camper Tie-Downs #HSAB for your 2018 Ford F-350 Super Duty but we actually recommend going with the Camper Tie-Downs #HSSF instead as they have a slightly different design that better fits your Super Duty. Attached are…

view full answer...

Answer 12

Hello Shonda, thanks for writing in. There is not a specific weight rating for the Brophy Slide In Camper Tie-Downs #HSSF. They will work with any camper that is properly sized for your truck. So as long as the camper fits in the truck bed and weighs…

view full answer...

Brophy Camper Tie Down Recommendation for a 2015 Ford F-250

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching