Correct Replacement Grease Seal for Boat Trailer Grease Seal # 470361

Question

Question:

Hi,I am trying to find my grease seals for my boat trailer hub. the number on my seal 470361 when I enter this number 168255TB pops up is this correct ?

asked by: Gary S

0

Expert Reply:

The correct replacement grease seal for seal number 470361 is part # RG06-050 for a pair or part # 58846 for a single seal.

Part # 168255TB has a smaller inner diameter than your current seal.

expert reply by: Leah S

0

Answer 1

The vast majority of bearings that are used on trailers are manufactured in China. I know that there is a looming mentality that anything from China is cheap and will break easily, but in the case of bearings, like the popular #L44649, you will get a…

view full answer...

Answer 2

No, so long as you replace your worn bearings with appropriate equivalent ones from another brand the races do not automatically have to be changed too, but there is certainly a chance that if the bearing are shot the races may have wear too. This…

view full answer...

Answer 3

Hello Dennis, You can use your current Chinese races, and just get the bearings from the Timken Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, GS-2125DL Seal #TMK32VR. You will want: - Inner bearing: Timken Replacement Trailer Wheel Bearing -…

view full answer...

Answer 4

Hey Mike, it's good to hear from you again! According to my research you should need the Grease Seal #TMK58ZR which has a 1.719" ID and a 2.565" OD, but you'll want to verify this on your end. From what I was finding, your 2000…

view full answer...

Answer 5

The only difference between the #RG06-050 and Timken #TMK58ZR is the brand and quantity. Timken is typically considered to be a high quality brand, particularly for their USA made bearings. The #RG06-050 comes with two seals so it is the better…

view full answer...

Answer 6

Unfortunately, Michael I cannot find any information on an AL-KO 7170 trailer hub. I would need for you to see what size bearings your hub uses and send me some images along with dimensions to identify the bolt pattern and any side brakes it may use…

view full answer...

Answer 7

The Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2 #RG06-050 is the correct replacement for a 171255TB seal and I'm not seeing a grease seal we have that has a 1.750 ID. You do want a tight seal on your…

view full answer...

Answer 8

The bearing part #L44649 has an inner diameter of 1.063 and is typically used in 3,500 lb axle hubs and the #L44643 has an inner diameter of 1 inch and is typically used on 2,000 lb axle hubs. If you can get me more info on your trailer like axle…

view full answer...

Answer 9

Hey Paul, it sounds like your boat trailer uses a BT8 spindle, so you can use the Double Lip Grease Seal #34823. This seal has an inner diameter of 1.25" , an outer diameter of 1.98", and will work with BT8 spindles.

view full answer...

Answer 10

You can verify that the 10-19 grease seal included in Bearing Kit #BK2-100 is the correct one for your spindles by taking two measurements. First you want to measure the rear hub bore where the seal is inserted. The seal's outer diameter needs to…

view full answer...

Answer 11

In order to find the correct replacement grease seal for a trailer axle you have a few options. The first and easiest option would be to crawl under the trailer and read the axle capacity off the tag on the center of the beam. The part #RG06-050 for…

view full answer...

Answer 12

Hey John, thanks for reaching out! We do have the Timken Kit #TMK54ZR that uses the L44643 bearings, matching races, and a grease seal with the correct ID/OD for your setup. I can't guarantee these aren't made in China, but what I can say is…

view full answer...

Correct Replacement Grease Seal for Boat Trailer Grease Seal # 470361

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching